Registrati

Product Finder

Impostazioni

Useful links

Chat dal vivo
 
[["US","AU","GB","DE"]]
Registrati

Yak 54 1.380 millimetri 40e classe Scala 3D (ARF)

Yak 54 1.380 millimetri 40e classe Scala 3D (ARF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
3890 g
SKU:
HM-YA5440E

Combine

essential items and
esc
battery
servo
acc
Descrizione
prodotto

Le linee classiche e comprovata capacità del Yak 54 si combinano per renderlo uno dei modelli acrobatici più popolari, il Dipartimento Funzione Yak sembra certamente la parte e per non sbagliare, 3D volare è ciò che questo modello eccellente è tutto!

La qualità di questo Yak 54 è semplicemente quanto di meglio si possa, cellula è stata costruita per mantenere il peso in volo minimo ma sufficiente per prendere la punizione di acrobazie estreme, il rivestimento di qualità superba è stato sapientemente applicata forte e per il tocco finale, i pantaloni cappuccio, a baldacchino e ruota sono finiti in una vernice lucida profondo. L'hardware è eccellente e anche scelto di mantenere il peso in volo ad un minimo assoluto e, naturalmente, il modello di funzionalità plug in tubo dell'ala & CF ala come ci si aspetterebbe per un facile trasporto.

I H-re Yak 54 esegue ogni pollice buono come sembra, naturaly si fa per un grande piano sportivo ma sarebbe giusto dire che Hardcore 3D è quello che il Yak è stato progettato per. La precisione della cellula, sembra sbalorditivo, superiore qualità della linea e sorprendenti specifiche peso piuma rendere lo Yak 54 un aereo deve avere per tutti i piloti acrobatici e 3D!

Caratteristiche:
schema attraente che è grande per l'orientamento
costruzione di qualità superiore e copertura
Facile e veloce da costruire
peso ultra leggero ma forte della struttura del velivolo
In ottima applicata, rivestimento di alta qualità
profilo alare empenage completa
collegamento palla barre di controllo filo armonico & pull / pull timone
funzionalità 3D Stunning
assemblaggio campo rapido, facile da trasportare

Specifiche:
Apertura alare: 1.380 millimetri
Lunghezza: 1.290 millimetri
Ala Area: 37dm2
Peso a secco: 1200g (inc tutto l'hardware)
Peso di volo: 2100g ~ 2200g (circa)

Richiede:
Il proprio 4 ~ 6 canali TX / RX
42 millimetri Brushless Outrunner Motor
60A ~ ESC 80A
servo 4 x Digital High Torque Parco ~ Std
3300mAh ~ 4500mAh 4s ~ 5s Lipoly batteria
50 millimetri Spinner
UBEC

Product
Specifications

Ulteriori informazioni

  • SKU:
    HM-YA5440E
  • Brand:
    N/A
  • Capacità ( mAh )
    No
  • Peso (g)
    3890.00
  • Lunghezza:
    1050.00
  • Larghezza:
    240.00
  • Altezza
    430.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent model airplane, I installed nitrodvigatel OS MAX 55. Performs all aerobatics, I'm happy with the purchase!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
, , OS MAX 55. !!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this kit 6 months ago but only started to build now and all I can say is WOW! Covering job is really good, I barely had to iron anything. I only ironed control surface edges as I always do with any kit but in this one I could glue the hinges straight away. Everything looks aligned (no warps), all flight surfaces are airfoiled , just beautiful! Control surfaces edges are beautifully chamfered (beveled) in an absolutely perfect 45 angle. This will give plenty of control throws for 3D.
I bought a second kit before even assembling this one. I would by more if it wasn't for the shipping and Customs charges.
I'll update this review after assembly and flight tests.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i have just fly my yak 54 with Turnigy Aerodrive SK3 - 5045-660kv with 4c 5000mah lots of power goes smoothly
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
timo aeromodelo muito simples de montar e com acabamento perfeito.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very very good planes for aerobatics and 3d !!! Set up 4s motor Turnigy sk3 4250-500 propeller apc 16x10 lipo nanotech 4s 25c 3300 Flight times 7 min. with 30pcnt residual capacity.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This yak 54 is a keeper, spent some time getting set up and it flew very well with little trimming on the maiden flight, followed throws and cg from the instructions they seem to be spot on. I have started to make some mods to the air frame due to experience with similar arf's the 2 main ones increased support around landing gear and and bracing around motor mount, added to this I also ran ca over most of the front structural joints just to make sure, I have to say the construction excellent running gear much the same as the other review, 3 flights today lots of fun.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great kit, well made, good hardware, paint & covering.
Good instruction manual supplied.
I added a carbon elevator pushrod & ply servo mount rearward of main spar. Pull/pull rudder, carbon tube main spar, Al landing gear, F/glass cowl & wheel spats all supplied. I used NTM 42/58 500KV outrunner with 5mm collett adaptor pinned to suit 50mm carbon spinner with alloy backplate & made a 65mm T6 alloy motor mount (36grams), turnigy 85A ESC with BEC, 4 x Corona DS-319MG Digital servo's (32 grams each). Turnigy 15 x 8" cherrywood propeller produces great thrust. The canopy latch makes access quick & easy for battery changes.
With my servo arrangement, no ballast was needed using Zippy compact 4000mAh 25C 5S Li-Po battery, giving a flying weight of 2350 grams. Excellent model, great colour scheme, good stickers supplied. With a wingspan of 1380mm this model has good presence in the air. I throughly recommend this 3D capable model.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Follow up to initial review. I was wrong, the 3 mm space I complained about is required to plug the wings in, The wings are tapered, without the space u couldn't install em into the fuse. The plane is excellent, probably slower flying than most 3d planes. I have a 4000ma 5cell bat, 105 amp esc, turnigy .46 motor and a 15x7 prop, Is plenty fast for me. 60pcnt throttle yields 8 minutes of high perf flying. They love it at the field. The LG is easily bent on HARD landings. Is easy to straighten too. The bending prevents breakage of fuse/LG mounting area - thats good for me, I still have hard landings. It does not have mnt points provided for a 2nd elevator servo. I have the recommended 15158a dig srvos, am sure the rudder servo is stalling and 90pcnt sure elevator is, I don't see it in ailerons. This plane will do whatever you want it to. Real 3d guys will need more powerful servos to do a 2 meter loop at full speed.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just got my Yak 54 in. Mocked it up and looked at all the hardware, most glue joints, covering etc. This is a very nice plane - as advertised. Fit and finish are excellent overall. Only issue I see is the fit of the wings into the Fuse is about 3mm too big (tall) for the first 50 mm or so on both sides of the fuse. Its not a lot and shouldn't affect flight but for such a well built plane the factory needs to know. Instructions are better than average. Hardware is excellent -like my Enigma, Fiber control horns, good landing gear. Can take 1 or 2 elevator servos. 3 stripes on btm of each wing
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

file di clienti
MANUAL Scaricare ora [2544kb]
No File Name Scaricare ora [1621kb]
Yak54 all up Scaricare ora [1823kb]

Combine

essential items and
esc
battery
servo
acc

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.