Registrati

Product Finder

Impostazioni

Useful links

Chat dal vivo
 
[["US","AU","GB","DE"]]
Registrati

Zero Brushless (PNF)

Zero Brushless (PNF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
1896 g
SKU:
Z502-PNP
Descrizione
prodotto
La Zero è stato uno shock per Allied piloti da caccia quando primo incontro nei primi giorni della guerra del Pacifico, che domina i cieli con la sua velocità, il design leggero e armamento pesante. La Zero si è rivelata letale in un duello fino alla fine è stato superato da nuovi combattenti di qualità superiore e un cambio di tattiche usate dai piloti di caccia alleati.

Questo grande modello osservare Parkfly cattura lo spirito dello zero con il suo contorno di scala e la vernice di pre-applicato opaca. Un potente motore brushless pre-montato offre combattente come prestazioni di volo e la maniglia del servo pre-montato lo Zero come curve strette. Hai la possibilità di fisso sotto-trasporto o il lancio a mano, ed essendo un Plug N Fly, circa un'ora o giù di lì è tutto ciò che serve prima di essere pattugliare i cieli alla ricerca di che il prossimo dogfight.
 
Spec.
Apertura alare: 850 millimetri
Superficie alare: 13.6dm2
Lunghezza: 705 millimetri
Peso di volo: 340g ~ 375g
Motore: 1300kv brushless outrunner
ESC: 20A
Servi: 3x9g

include:
tutto Hardware
Colla
Utensili
2 x Elica
foglio decal
 
richiesto:
Tuo 4 canali TX e RX
7.4V 1000mAh 1300mAh ~ 2s 2s Lipoly
Product
Specifications

Ulteriori informazioni

  • SKU:
    Z502-PNP
  • Brand:
    N/A
  • Peso (g)
    1896.00
  • Lunghezza
    1000.00
  • Larghezza:
    175.00
  • Altezza:
    300.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Als erstes neuen Motor rein DT750 ca. 80g (passt an vorhandene Motorhalterung), mit dem original 50g gar nicht erst probiert. Trotzdem vorn viel zu leicht, schtze mu ca. 100g Motor rein bzw. Akku entsprechend vorschieben. Lackierung ist super, aber das Styro ist natrlich nicht so toll. Achtung lst sich mit dem HK Foam Glue super thin Kleber auf, also den beiliegenden EPS Kleber verwenden. Nur was fr GWS (Clone) Enthusiasten.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This plane with the motor it comes with and a 1000mah 3s battery stuffed all the way forward is very tail heavy. I had to add over 3 OZ (85gm) to the nose and it will fly but it's still tail heavy.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Muy contento con el envo, el paquete lleg bien y sin desperfectos a Espaa. El modelo, Zero Brushless, entero y sin desperfectos. La calidad-precio est bien, tiene pequeos fallos sin importancia pero de todos modos contento con el modelo. El nico "pero" es que el cono de la hlice lleg un poco deformado, pero se puede arreglar aplicando calor.
Estoy ansioso por volarlo.

Saludos!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
hi guys wrote about this plane before, she need a lump of led up front that means a great loss of power. to get it rite u got to spend a bag full of money to get it flying. yes as one flyer said everytime u land a bit drops of the foam is horrible. this thing is not quality at all nicer warbirds to buy very old rc bird tec. move on not nice guys . just a green bit of card board.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
came well boxed in excellent time but this one was bad from the start dont know what the foam is cheap and nasty plane cog out by a mile pulles radicaly to left or the right those days that l few were picture perfect no wind and the zero was a pig to fly hated it from the start first bad one from hk
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
arrived in good time well packed box guan lee model foam low quality not epo, but strong looks ok but have seen better put together in 4 hours nothing tricky here very dissapointed with this model. low powered needed lots of weight to get cog rite very twichey little plane its no zero crashed twice not a good one hk not recomended
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Disappointing. No CoG specified and even with adding nose weight, removing tail weight as much as possible it was still too temperamental to be an enjoyable flyer. No bracing in the control rods meant flexing was a problem, no threading on the elevator and rudder wires either which meant they had to be bent and cut to shape. Elevator uneven at rest and resulted in snap rolls when applied with force, resulted in a dive that had no chance of recovery. Lasted one flight.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

file di clienti
Zero colour scheme Scaricare ora [380kb]

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.