2.4GHZ 1000MWのTx Rxの＆1/3インチCCDカメラPAL

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 21, 2013

This Video transmitter is amazing!!

I have done hundreds of flights with it an I am VERY happy with it! The video quality is super good an the range is good, too! (little more than 2 kilometers with stock antennas, but much more with good antennas, I have done 6km with CloverLeaf/3-Turn-helical antennas!!) There is only one problem: The Vtx is getting hot! So opened it and filled it completely up with heatsink paste. Do This and make sure that the TX is getting fresh air during flight and you are fine!

• Overall
• Quality
• Value

Customer Rated

Apr 23, 2013

Completely useless China-quality crap. I waited for it for weeks and found the TX to be totally dead.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 06, 2013

Good camera but the Tx gets heated up...

• Overall
• Quality
• Value

Customer Rated

Oct 31, 2012

As a Radio Ham and aerial designer , ill build an antenna system that will work over 5Km with this system, When I test ill come back and give the results, curruntly achieved 4.65 KM on 5.8 GHz (200mW ) see www.williamsbuild.net

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 05, 2012

Check the connection of the camera. vcc is inverted to the site of Vout

• Overall
• Quality
• Value

Customer Rated

Jul 24, 2012

Hi Everyone,

I purchased this item and when I connected the cables to make the first test didn't work. The camera got too hot and I start looking around to understand why . Then I noticed that the cable that connects the camera to the battery and TX was incorrectly assembled , so the red was connected to Vout and the white to . After a long battle to get HK attention I had to send the package back to them. So HK decided to send me a replacement which arrived last week. I got it and this time before connecting and switch it on I checked the cable and once more the cable was connected in the wrong way. Not to lose more time I made the modification and the camera works fine now. My point is, if someone is planning to buy this package, pay attention to the cable, this way you may avoid a broken camera and all the costs to send back to HK and get a replacement.

• Overall
• Quality
• Value

Certified Buyer Rated

Jul 22, 2012

good tx and rx, mine gets hot but i readed some reviews and orderd a esc heatsink pack, this in combination with a small pc fan and your off to go!!

• Overall
• Quality
• Value

Customer Rated

Jun 08, 2012

Hello all ,

1.Delivery was very fast , my advice buy a batteries for the transmitter and to the receiver

Please note this came without any manual book or wring instruction.

But HK make 90pcnt perfect of the wring ..It not complex to make the wring but it will be wisely to buy and plastic adapter .

2. The camera came as in the picture (I built my own cover and adapter to the UAV plane ) but my advice

Don't save the money and buy camera adapter.

3.camera picture is good ! make sure your transmitter is cool up .

• Overall
• Quality
• Value

Customer Rated

May 07, 2012

It would be good if Hobby King would just sell the TX (transmitter) by its self as they do for the 5.8ghz as I have 4 receivers now but only use 2 of them and will end up with more of them as I have to buy complete systems for my other planes. HINT HINT HK

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 24, 2012

mesafesi olduka yksek,kullandnz kumandada 2,4Ghz olmamal,kumandann sinyali kamera sinyalini bastrabiliyor.