2.4GHzのSUPERMICROシステム - 受信機とESCオールインワン（3CH）

• Overall
• Quality
• Value

Customer Rated

Feb 01, 2014

Very good product. I use it with my Futaba 8uaps and micro module from this page. We can make 12 grams micro planes made of 1/32 balsa and actuators. I use cheap 15g lipos from Bidproducts. I use to save weight using very thin painted coper wires. Two or three channels are achieved.

• Overall
• Quality
• Value

Customer Rated

Sep 08, 2013

This is a very good reciver for very light models up to 15 grams (totlal weight). I use them for1/32 balsa models (like small hand launch gliders). It drives a 7mm direct drive motors and two actuators (three channels). I also use light batteries like 15mah, 35mah or 50mah. The things I do not find in Hobbyking I buy from Plantraco/Microflight or from Bidproducts in China (magnetic actuators, etc...). This receiver is not compatlible with micro servos. I ALSO USE a micro module in my Futaba Tx that you buy in Hobbyking. Good luck!

• Overall
• Quality
• Value

Customer Rated

Sep 01, 2012

Can someone clarify if this is DSM2 compatible, this was mentioned in the discussions section.

Thanks in advance.

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 03, 2011

Channels: 3 channels

Frequency: 2.4Ghz

Type: FHSS

Size: 20.00mm x 12.00mm x 3.62mm

Weight: 0.65g (not including wires)

ESC: 2A Intergrated

Voltage: 3.0V~4.2V (1S Lipoly recommended)

Antenna Length: 30mm



Features

Cable of driving 2 x electromagnet servos directly (Requires Soldering)

Compatible with Brushed or Brushless Motors

Ability to connect a second ESC (HK030)



Requires.

2.4Ghz SuperMicro System module