サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

29.5x26mm 2800kvブラシレスアウトランナーモーター

Generating Links

29.5x26mm 2800kvブラシレスアウトランナーモーター

価格:

Now save 節約 ¥0.00 ¥0.00

¥1,373.79
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
PM19S-2800
送料無料したい? クリックする こちらへ 詳細情報を参照する
29.5x26mm 2800kvブラシレスアウトランナーモーター


仕様:
RPM / V:2800kv
外形寸法:29.5x26mm
シャフト:3.0ミリメートル
電圧:2セル〜7.4V
重量:17グラム

プロップ試験日:
5x3の7.0V 5.6A 39.2Wの14460rpmの196グラム
5x3の7.8V 6.0A 46.8Wの15360rpmの216グラム
5x3の8.4V 6.5A 54.6Wの16080rpmの232グラム
6x3の7.0V 6.9A 48.3Wの12660rpmの226グラム
6x3の7.8V 7.5A 58.5Wの13140rpmの252グラム
5x3の8.4V 7.9A 66.3Wの13320rpmの262グラム


  • KV ( RPM / V ) 2800.00
  • 最大電流( A ) 12.00
  • 抵抗( MH ) 0.00
  • 最大電圧( V ) 8.00
  • 電力( W ) 84.00
  • シャフトA (ミリメートル) 3.00
  • 長さB ( mm)の 17.00
  • 直径C (ミリメートル) 26.00
  • ことができます長さD (ミリメートル) 12.00
  • 総丈E (ミリメートル) 32.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Gato P | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Nov 09, 2014

i have this motor, very good motor, but use it with 5x5e prop, 6x .... no very good, it ll burn and broke , 5x5e prop is the best to this litle motor, mutch and a lot flyes, in this way, esc 10a is perfect combo.

Artur | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 09, 2014

2S - best trust 6x4 !!!! (wing ESC blue HobbyKing 10A ESC 1A UBEC - all ok)
2s - smigo 6x4 najlepiej si sprawuje z latajcym skrzydem - prbowaem 4,75x4,74 i 6x3 oraz 5x3. Najlepiej si latao z 6x4.

serkankahraman | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 30, 2013

250 gramluk balsa yildirim modelinde kullanicam. bu model thk nin yeni urettgi lastik motorlu bir model. ben modifiye ederek elektrik motora cevirdim. umarim uar.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 03, 2013

Gehaeuse aus Kunststoff - Gewicht 17g inkl. 6cm Kabel,

Lochradius am Befestigungsflansch 15mm mit 2,5mm Bohrungen(hat aber auch aber auch 2mm Bohrungen 2 mit 7,75mm und 2 mit 8,75mm Radius - waere geignet fr 2,5mm Gewinde und Befestigung von hinten)

Motorgehaeuse 26mm Durchmesser,

Freie Achse 3mm Durchmesser 5,2mm lang - reicht fr Mitnehmerbefestigung,

Propsaver von 5,5 auf 9,5mm mit 2 2mm Schrauben

sandun | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 17, 2013

ohh this is very economical and handy it is not power hungry at all so it provides long flight time and for this we need only a small esc with 3s battery a jet configuration can be achieved

Valter | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Oct 11, 2012

Motor muito ruim. Veio no kit Hobbyking Super Mini Quadcopter Quadro com Motors (445 milmetros). Se voce comprou este kit e teve problemas com algum motor, aconselho trocar os quatro.

Heli Baby | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 22, 2012

Der Motor darf nur mit einem 2 Zellen Lipo betrieben werden, sonst super.

Sandman123 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 02, 2012

I am putting together one of HK's Super Mini Quads. Using four of the Polyamide 29.5 x 26x 2800 KV motors.

Everyone of five motors I was abble to pull the bell (prop Saver) end off the shaft with no effort . This would fly off with the pull of a prop and possibly due damage. The screws for the prop saver may be the way to lock the bell on but you are tightening a metal screw against a metal shaft in a plastic compound ,,,,stripped screws anyone.

I put thin CA glue on the shaft slid the bell unit back on and kept twisting it to keep the CA out of the bearings. Tightened down the prop saver bolts as far as I dared and hopefully they will stay locked on.



Alot of the vibrations were gone after this minor surgery. Got some CA in one bearing but it burned out with a high speed run.



If your planning on using these polyamide motors both the 2800 KV and the 2200 KV versions. MAKE SURE THEY DO NOT COME APART WITH A SIMPLE PULL.

Time to get back to building.



warthox | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jan 18, 2012

5 out of 9 of these motors were absolutly useless due extrem vibrations. 4 were more or less ok with light vibrations. cant recommend them.

pil78 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jan 14, 2012

External (cosmetic) and fixing parts are made in a kind of moulded plastic material, a bit rough, needs to be filed. This plastic looks solid. The major parts are made in metal (like axis, bearing). Weight measured 16.8Gr.

Unfortunately on mine, I feel some hard points when turning the motor in my hands, may be some magnets are not well positionned ?

This motor will have a breaking in period, and if not enough stripping down.

To be checked, vibration and power, but for the price, ok for me.

ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!