リーバー5.8G FPVオーディオ/ビデオRXと350MW TXパッケージ

• Overall
• Quality
• Value

Very good in all respects

Jan 14, 2023

Works perfectliy well, lovely packed, absolutely complete!

• Overall
• Quality
• Value

Rx does not work

Mar 28, 2021

Antenna and tx is fine and fully functional. Rx is unfortunately not able to transmit any signal at all. Diode light is working and channel shuffling is working. Do not recomend.

• Overall
• Quality
• Value

Every thing works as expeted:-))

Jun 24, 2020

not more to tell

• Overall
• Quality
• Value

.

Jun 04, 2020

.

• Overall
• Quality
• Value

i received this tx/rx in juanuary 10 /2020

Apr 13, 2020

i tried this tx /rx a week ago and i didnt take view from the yellow exit pin of the receiver and i tried the red pin and i solved the problem itb works fine

• Overall
• Quality
• Value

Good to get started with

Jan 07, 2020

For a low-cost system it works a treat, many glitches including the video out being the red RCA. Reasonable value for money but not a long term solution.

• Overall
• Quality
• Value

good value, not great quality

Oct 10, 2019

This system comes well packaged. It works decently, but has several faults.
First off, the video output of the receiver is on the red connector instead of the yellow.
Second, the plate antenna arrived with a screw fallen off (easy to screw back in place).
Also, the instruction manual is unclear and for a similar but different product.
The channel seperation is very poor. for example, if the TX is set on ch8, video is received on ch at least 1, 2 & 8
Finally, the video output becomes black and white after a few seconds. I'm not sure if that is my camera or the radio though.

• Overall
• Quality
• Value

Good TX/RX with some glitches- Beware of video out connection

May 09, 2018

Bought this set on special, so overall it was pretty good value. I then spent days trying to get it to work with different TX and RX. Found that the TX power pin for the camera was dead. Got the TX to work with an old RC305 receiver, but still no luck with the Lieber RX. I finally got out the CRO and found the video signal on the RED audio connector. Video is good now and works with Boscam and Aomway TX without issues, too. Channel separation is not great, so leave a gap of 2 channels between transmitters.
T