New Items フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

図5(a)1Sブラシレスコントローラー

図5(a)1Sブラシレスコントローラー

Discontinued Product

Please continue searching for a similar product.
WANT FREE SHIPPING? Click here to find out more!
図5(a)1Sブラシレスコントローラー

スペック。
現在の作業:5A
最大電流:6.2A(3秒)
重量:(ワイヤーなし)1.8グラム
外形寸法:22x13x3mm
  • 単位 1S6A
  • Brand -
  • 容量(mAh ) -
  • 重量 19.0000
  • 長さ 90.00
  • Packaging Width 5.00
  • 高さ 75.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I'm using this to power the HK AP05 3000kv brushless micro motor and it does the job quite well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm using this to power the HK AP05 3000kv brushless micro motor and it does the job quite well.

I found this ESC to be very responsive! is not configurable. its just plain and simple! keep in specks and no problem should come up! (please care for the pinout. it could not be the same for your receiver so you must check it. its very easy to swap the connectors from the plug, just use a needle or x-acto knife to release the terminals and you pretty much done :D

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I found this ESC to be very responsive! is not configurable. its just plain and simple! keep in specks and no problem should come up! (please care for the pinout. it could not be the same for your receiver so you must check it. its very easy to swap the connectors from the plug, just use a needle or x-acto knife to release the terminals and you pretty much done :D

good ESC, use for BErloid Xi

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good ESC, use for BErloid Xi

Worked fine to half throttle. Then motor couldn't keep time. It died before i could try to program it with a Turnigy plush programmer card. I don't even know if it would have worked. My guess is this ESC has incorrect timing mode for the little motor I was using but nothing I can about it now.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Worked fine to half throttle. Then motor couldn't keep time. It died before i could try to program it with a Turnigy plush programmer card. I don't even know if it would have worked. My guess is this ESC has incorrect timing mode for the little motor I was using but nothing I can about it now.

Good quality... Thanks HK

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good quality... Thanks HK

There are no instructions at all and it cant go over half throtle because motor stops. It just cant send enough power to the motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

There are no instructions at all and it cant go over half throtle because motor stops. It just cant send enough power to the motor.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!