新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録

600ミリメートルフライバーレス高品質カーボンファイバーメインブレード

600ミリメートルフライバーレス高品質カーボンファイバーメインブレード

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
350 g
SKU:
178000011
商品概要

これらはあなたの600 / 0.50サイズのヘリコプターのための高品質、美しく完成した炭素繊維のフライバーレスメインブレードです。

具体的には、ますます人気のフライバーレスヘリコプターで使用するために設計されており、これらのブレードの翼形と重量バランスは、あなたのモデルのための最高の巡回応答と制御を与えるために最適化されています。

フライバーレスアプリケーションの周りに特別に設計されているにもかかわらず、これらのブレードは、同様に、標準のフライバーのヘリコプターのモデルに使用することができます。彼らは、伝統的なフライバーのヘリコプターのモデルに使用した場合に飛んでFAI / FC3スタイルに優れています。

これらのブレードの大部分が完全に終了しているが、それらはスプレーしぶきや汚れ塗装ラインのビットがあるかもしれないことを意味する「B級仕上げ」ブレードとして販売されています。これは、決してこれらのブレードの品質/性能に影響を及ぼし、ほとんどがB級として販売されているにもかかわらず完璧に仕上げます。

あなたはどこにも、この品質のメインブレードに、より良い価格を見つける文句を言いません!

* HK600、トレックス600、ラプター50、ロゴ600および他の600 / 0.50サイズのヘリでの使用に最適です。

仕様:
長さ:600ミリメートル (ブレード先端にボルト穴)
重さ:128グラムごと
ボルト穴:4ミリメートル
グリップ:12ミリメートル (14ミリメートルブレードグリップに合わせて1ミリメートルシムが含まれます)

ご注意:パターンが示されているものと異なる場合があります。

Product
Specifications

追加情報

  • 単位:
    178000011
  • Brand:
    いいえ
  • 容量(mAh )
    N/A
  • 重量(g )
    350.00
  • 長さ:
    620.00
  • Width:
    12.00
  • 高さ
    60.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Put a set on Trex 600DFC, I couldn't be happier with the quality and performance. Hopefully HK will be stocking them for a long time because I will be buying them again.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i can't get over the quality of these blades for the price i'm going to change all my helis to rjx blades they are stiff and well finished
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have to add some comments to the first review. Made a testflight with my T-Rex 600 ESP and had terrible Blade-Tracking with the RJX-Blades. With my former Blades (Blattschmied GCT Expert) I had absolutely no problems. Changed back, and tracking was good! With the RJX-Blades I had also vibrations on the Rotorhead, although they got balanced. Guess the vibrations are a result of the bad tracking. Guess the two blades are a bit different.
Actually I'll try to make a RMA.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got the Blades yesterday, but they are far away from "High Quality". As assumed, the painting was not perfect, but that is not the problem.
Balancing them was quid a hard job, because one blade was a bit heavier. Only a 5cm wide Tesa-Film balanced them.
Lets see how they fly, hopefully better.

br
Chris
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought a set of these for my Trex 600 pro. Finish on them is pretty good with only slight smudging here and there on the lettering. Not happy with the carbon though 1 one of the blades creaking when gently twisted by hand. Other one was solid and had no movement at all. Not happy putting them on the 600 so returned them under RMA. Cost me nearly 6 postage and then lost out on the refund due to the exchange rate changing. as the refund was in dollars. RMA took over a month so not at all pleased.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use these on my Blade 600X. Very Nice blades. Needed a little extra balancing out of the box. I think I'm going to stick with these. They're a nice medium between the super cheap and the expensive blades. No complaints at all.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is very good looking blades. Hav a few paint smears, but it's barely visible. Finish is further good. As well as good balacned
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
muy buena terminacin rendimiento.-
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very pleased with these. Got the latest paint scheme (not the one pictured here) like the RJX 430mm blades HK also sells, that are black at the grip. They have a 55mm cord, so should be great for autos. I'd love to see some of these in 520mm and 550mm also.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good quality even for hard 3D .I have not noticed any differnce between align 3g.

The price is much better.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。