600ミリメートルTurnigyカーボンファイバーメインブレード

• Overall
• Quality
• Value

Customer Rated

Nov 11, 2011

For those of You that have problems with the inlayed decal or the color of any main blades Krylon Fusion spray paint fuses to plastics and poly's and is available at most hardware stores for around six bucks US and would be enough for a dozen blades or more.

• Overall
• Quality
• Value

Customer Rated

Jul 18, 2011

I use it in my Atom 6HV . Balnced fine, but the fininsh is inconsistent, dull in some areas, and glossy in others. A little more polishing from the factory would be appropriate on these.

Weight: 137.1g Chord: 54.32mm Blade thickness: 8.10mm Grip thickness: 12.10mm . Hole diameter: 4mm Applied TURNIGY sticker: 1" x 5.5"

• Overall
• Quality
• Value

Customer Rated

Jun 15, 2011

Most people are complaining about quality.... I have absolutely no problem. The quality is great! No dull areas, the fiberglass looks nice and straight!
My only problem is the HUGE glittery "Turnigy" sticker that's on top of the blade, under the clear coat! Makes my heli look like it's going to the gay parade. HK really needs to sell what they clam the product is in their pictures!

• Overall
• Quality
• Value

Certified Buyer Rated

Jun 04, 2011

Blades are OK, finish is not great, has some dull spots and blades ends a it rough, it also needs to be balanced. Stiff and stable. For a learner pilot, good value for money. 3D,not so sure.

• Overall
• Quality
• Value

Customer Rated

Apr 20, 2011

The finish looked just fine on my set but.... I HATE the HUGE glittery TURNIGY stickers that are laminated in so you cant remove it!

WARNING: Unless you want to look like a complete cheap-ass tool at the air field, don't buy!

• Overall
• Quality
• Value

Customer Rated

Mar 23, 2011

Balnced fine, but the fininsh is inconsistent, dull in some areas, and glossy in others. A little more polishing from the factory would be appropriate on these.

Weight: 137.1g Chord: 54.32mm Blade thickness: 8.10mm Grip thickness: 12.10mm . Hole diameter: 4mm Applied TURNIGY sticker: 1" x 5.5"

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 01, 2011

The cloth (inside) is a little wavy, but the finish (resin) is perfect. Good blades.

• Overall
• Quality
• Value

Customer Rated

Dec 31, 2010

Blades are OK, balnced fine, but I agree, the fininsh is inconsistent, dull in some areas, and glossy in others. For the money they arent bad, but a little more polishing from the factory would be appropriate on these.

• Overall
• Quality
• Value

Customer Rated

Dec 20, 2010

estas palas son increibles,,perfectas,,,buen equilibrado,,buen terminado muy duras y enciman solo pesan 119 gramos cada una,,,son muy ligeras,,,,os dejo un video probando las palas



these shovels are incredible, perfect, good balance, good finished very hard and only raise weigh 119 grams each, are very light, I leave to a video trying the shovels





http://www.youtube.com/watch?v=adh5J-aTKXQ



saludos

• Overall
• Quality
• Value

Customer Rated

Dec 13, 2010

Photo as of 12/12/10 shows bottom of blades (for CW rotation).

I bought two pairs of these blades because I liked the plain black carbon fiber look as shown in the picture. Unfortunately, I didn't realize there would be a large 1" x 5.5" glittery TURNIGY sticker on the top of each blade. It is applied during construction, so they are IN the resin and NOT removable. I wouldn't even mind the sticker so much if was halfway STRAIGHT, or LEVEL, or CENTERED, or at least the SAME DISTANCE from the tip as the other side... SOMETHING! The obvious lack of symmetry really makes the blades look like crap in my opinion.

Sticker aside, the build quality is decent for $22. There are some imperfections in the resin towards the trailing edge and the weave isn't perfectly straight, but they feel solid and well made. The blades appear true and are not warped or twisted. A sticker on the packaging says not to exceed 4500 RPM!!! :-)

Verdict: An affordable way to cheapen the look of your high dollar 600 heli (or make it look like your kid put stickers on the blades). I have to admit, for $22, I'd probably buy them again.

Weight: 137.1g
Chord: 54.32mm
Blade thickness: 8.10mm
Grip thickness: 12.10mm (won't fit my 600 without sanding)
Hole diameter: 4mm
Hole center to inside edge: 17.65mm
Hastily applied TURNIGY sticker: 1" x 5.5"
Ghetto fabulous rating: 10 !