新規登録

Product Finder

設定

Useful links

 
[["US","AU","GB","DE"]]
新規登録

モニタと電圧表示Quanumと8インチの800×600 FPV地上局

モニタと電圧表示Quanumと8インチの800×600 FPV地上局

Now save save AU$0.00 AU$0.00

AU$244.20
在庫切れ!
Stock:
OUT OF STOCK
重量:
3985 g
SKU:
452000001-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

商品概要

Quanumがすべて1の場合でDIY地上局である、それだけで、純粋なFPVからの完全なPCベースのミッション計画への地上局プロジェクトに最適な拠点です。このDIY地上局は、ロックと美しいアルミケースに収納された8インチLCDディスプレイへのシステム電圧モニタ、および内部電源とケーブルの接続の範囲、からすべてが装備されています。

上側ケース半体は、ポップアウト日/グレアシールド付き8インチLCDを収容します。 LCDは、-だけでなく、1024×768のVGAまでの標準的なRCAビデオとオーディオのすべてを受け入れます!お使いの電源電圧または内部バッテリを簡単に見ための電源バスに結ば素敵なLCD電圧モニタもあります。フェイスパネルの下にモニターと小文字のA / Vポートと2つのSMA上面板に引き出さアンテナエクステンション(女性への男性を)フィードビデオおよびオーディオ入力ケーブルはありますが、あなたはビデオ受信機の選択を接続したりすることができます一方のリードおよび他の上のテレメトリ無線であっても映像受信機。きれいに黒の下にインストールされたすべてのアクセシビリティーの舷窓とアルミフェイスパネルを起毛。

下部ケース半体は、2つのUSBポートが装備され、イン/アウト、A / V RCAスタイルのビデオと電源ポートは、マスタースイッチと簡単なバッテリー・スワップまたは貯蔵のためのアクセスハッチに縛ら。

これは素晴らしい眺めを持っていますLCDシールド大きな明るい太陽とFPVを真剣に人には必要不可欠である、またはあなたがパネルであなたのゴーグルをプラグインすることができ、A / Vと電源ポートを搭載され、観客がモニタ上に見に取得しましょう​​!部屋のたくさんのは、それが超クリーンで耐久性のある商用グレードのテレメトリ駆動地上局のために作ることができ、ナノまたはピコITX PC用とVGA対応モニターとUSBポートであります。

モニター仕様:
消費電力:DC12V 400ミリアンペア
パネルサイズとアスペクト比:8インチ4:3
解像度:800×600ピクセル
視野角:130Deg
明るさ:250cd /㎡
コントラスト400:1
応答時間:12msの
入力:BNC、RCAビデオ・オーディオ、VGA、YUV
VGA入力の解像度:640×480、800×600、1024×768のすべての60Hzのは、8ピンアダプタにVGA 15ピンが必要です

ケースサイズ:
外側:375x254x127mm
下部コンパートメント内側:305x229x64mm(パネルの下の38ミリメートル)
上部コンパートメント内側:305x229x45mm(パネルの下の38ミリメートル)

接続:
(アッパー)
ビデオおよびまたは遠隔測定アンテナのSMA拡張×2(メスにオス)
12Vの弾丸×2(オス)
RCAビデオとオーディオ
(下)
12Vの弾丸2雌雄に
ゴーグルやDVR出力用のRCAは、ビデオ・オーディオ出力
可能なマイクロATXまたはアンテナトラッカーX2用のUSB拡張
電源スイッチ

含まれています:
場合
サンシールド付き液晶モニター
電圧表示
コンセント
キーズ
回路図および説明書

*注:これはDIYの地上局であり、ビデオ・レシーバやPCコンポーネントが付属していません。これは、適切な部品選択や装備のために、アプリケーションに依存しています。

Product
Specifications

追加情報

  • 単位:
    452000001-0
  • Brand:
    Quanum
  • 重量(g )
    3985.00
  • 長さ
    410.00
  • Width:
    140.00
  • 高さ:
    280.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This device was working for a total time of 34 minutes. Then The screen showed no signal. Additionally, the TFT switches off from time to time and had display issues. The soldering was also very poor and in general the way it is assembled is very cheap. One of the worst boughs I ever made.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Disappointed with the monitor. It goes to blue screen instead of static so it has a very slow refresh rate when tried in the house compared to the Quanum diy goggles. All the antenna hook ups require the Antenna to be a SMA Plug 7.67mm, and your receiver needs to be SMA-jack 6.19 out. All my stuff was backwards so I had to spend a small fortune on SMA-PR adapters. I have not yet tried this outside, but so far, it is worthless inside. However, my Quanum monitor works well..... go figure. This system looks cool, but looks like I will need a different monitor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great product. screen quality is good. I use this with a 3S 5000mAh Turnigy battery. it work perfectly. Wires are easy to use. pay attention to the type of antenna for receiver (SMA / RPSMA)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Its a good beginning for a GS, you can use it as a base platform to customize it and put all that you need. It only have 1 video input with wire, would be great to have all inputs with wires and connectors
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I've had this for a while now, i bought it and honestly thought it was a tiny bit overpriced, but when i received it i do not think that it is anymore.

It's well built and breathes quality. I really like it!
Easy to mount all equipment too, i would have liked a liiiitle more space for the videoreciever but i managed to get the Aomway NVR reciever in there with a little bit of pushing, but it's so tight that it's hard to remove the microSD card from the reciever/NVR. Besides that, perfect.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good quality, screen is very easy to see and well lit. I would have appreciated some adapters or proper connectors. The connectors are unconventional. I had to grab a lot of my own connectors and cut wires and re-solder. It was a bit of a pain but more of a DIY project when everything should have already been done in kit form. Build quality is good, but my case doesn't sit flat. I suspect when everything was assembled it warped the case slightly. I think this is expected anyways. I would recommend only if you have access to proper connectors and are comfortable with soldering your own plugs/wires.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great Stuff ! Good Quality !! incorporating tx too in it. See files tab for image
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great little box!

Bit smaller than i thought however you dont want anything to heavy and bulky to carry around when out and about flying. The screen is very good and clear. I do believe that hobbyking should swap the dc connector in the bottom for an XT-60 so you could hook up a battery straight away otherwise you forever modding this case to suite your needs. The voltage checker is handy obviously as you dont want your screen to die halfway up in the air.

I would only ever give this 4 crowns however because the lack of connections and not really having a proper power module in the case i.e a rechargeable power supply.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
TOP qualitt! der Koffer ist sehr gut verarbeitet, der 8 Zoll TFT Monitor hat ein klares, sehr gutes bild und super auflsung. Im Koffer ist genug platz um kabel und empfnger fr den transport unter zu bringen. Die integrierte voltanzeige ist uerst ntzlich, ich selber benutze die Groundstation mit einem 2200mAh lipo und speise damit auch gleichzeitig meinen boscam 5.8GHZ empfnger - der verbrauch ist super gering ich benutze das teil mit diesem setup locker 3 - 4 stunden mit 1 Akku!

Wer eine Groundstation in guter qualitt zu bezahlbarem preis haben mchte ist damit sehr gut bedient, kann das teil nur empfehlen.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
My fpv ground station arrived today and was well packaged. Everything was working fine until I connected a 4s battery to the system. The monitor fried instantly! I hadn't even thought about it. Very disappointing, but was totally my fault. Next I had to go hunt on eBay and find a replacement monitor from china, of course. If you buy this system do not hook up more than a 3s battery or you will toast your monitor too! Other concern is the SMA antenna extensions included, there are two and both are useless, unless you hunt as I did to find the proper adapters. They way they come configured the one mounted to the board, meant for the receiver lead is female RP SMA.. Needs to have the male pin to work with an antenna. And the reverse is the case on the other end where you would connect the receiver. So lame, so Hobby King! All in all once I have these annoyances worked out I think it will be a nice setup. Would I buy it again? Hmmm. That's a hard one to say because I like the idea of a self contained unit, but on the other hand it might have been simpler and more straight forward to just go with a seperate monitor, receiver, battery component setup instead. I've got it now, so I'll make it work. Cheers!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

顧客ファイル
Quanum Display download now [80kb]
VGA-8pin_Mini_DIN download now [48kb]

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。