新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録

900MHzの1500mWのTx / Rxの&1/3インチCCDカメラPAL 420TVL

900MHzの1500mWのTx / Rxの&1/3インチCCDカメラPAL 420TVL

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
665 g
SKU:
CP150012RX8T
商品概要
  CCDカメラによる12チャンネルの900MHzのTx / Rxのビデオシステム。
Txの電力を供給強力な1.5W(1500mW)!
他の一般的なシステムとは異なり、我々は配線織機を生産しているとTxとカメラの互換性と同じ電圧になるようにカメラにそれが含まれていました。
あなたのカメラとTxを購入した場合は別途プラグ極性と電圧が非常に異なる場合があります。
含まれています。
1×ソニーCCD 1/3インチカメラ
1×900MHzの8チャンネルビデオトランスミッター(1500mW)
1×900MHzの12チャンネルビデオレシーバ


カメラの仕様。
CCDセンサータイプ:1/3カラーソニーCCD
ピクセル:500(H)* 582(V)(PAL)
走査方式: インターレーススキャン
同期システム: 内部同期
水平解像度:420TVライン
最低被写体照度0.01LUX / F1.2
DSP + CCD:CXD3142R + 405AK
S / N比:48デシベル
ガンマ修正:0.45
ホワイトバランス: オート
自動逆光補正: オート
レンズ:3.6ミリメートル
オーディオ: いいえ
入力電圧:9〜12.6V
電流が80mA
電子シャッター:1/50(60)〜1 / 100,000s
ビデオ出力:1.0VP-Pコンポジットビデオ
動作温度:-20〜50
サイズ:38のx 38ミリメートル
飛行時間: 約60分/ 100mah 3S
 
FPV Txの仕様。
チャンネル:8-Chの、AV同期
パワー:1500mW
入力電圧:12V
重量:18グラム
サイズ:73x41x14mm
周波数:0.9gのの0.910G、0.980G、1.010G、1.040G

Product
Specifications

追加情報

  • 単位:
    CP150012RX8T
  • Brand:
    いいえ
  • 容量(mAh )
    いいえ
  • 重量(g )
    665.00
  • 長さ:
    190.00
  • Width:
    75.00
  • 高さ
    155.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
The wires on the supplied harness do not match the camera, lucky it didnt get fried by putting12v into the signal wire. Had to cut and solder the wires.

The TX weighs 110g not 18g.

Image looks OK, but the camera could be better. The image transmission is effective, but no range test as yet.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
apparently it goes further than my radio! hex copter fell from about 400 ft (max allowed altitude) after I went out of radio range, all most everything was destroyed. re-soldered a few things on this unit and it works great again! wow. but now i bought telemetry system for radio with a nice alarm warning. ps the higher the receiver (mine is about 10 ft off ground) the better the reception. thought the camera was pretty decent, and no jelly! love to hear how some iBcrazy's antennas improve distance on these if anyone has tried them
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bonjour, juste pour vous signaler, que sur les cameras ,le guide blanc de la fiche video est monte a l'envers sur la platine de la cam. j'ai eu deux fois le meme probleme sur les kits en 900mhz..
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just received the parcel in good condition.
Package opened and found to be in good condition.
Before plugging in i found the Plastic cap on camera connector is reversed. - Vout is reversed as compared to the supplied cable. just reversed and powered it on. by default it is on ch 3. picture quality is Good with 420 TVL camera module. plugged in for 1 hr and tx seems to be hot enough to touch. need additional small fan on top.
Query : tx shows 0,1,2,3 channel list only but product says 8ch tx. how and where are rest 4 channels?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Unfortunately my product arrived defective. the tx (gold box shown in picture) was not working at all. im disapointed in the product and have sent it back to hobbyking. They havent made it a simple prosess to compleate but after contacting 5 diffrent support staff i have managed to send my item back and am waiting to reccive a replacement or get back to complaining.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This FPV camera works pretty well, but I cant give it 5 crowns just because I spend a LOT of time trying to figure out why the hell this thing didnt want to work: wrong wiring on camera battery connection. I couldnt believe this because Im not the first one with this issue, come on, just make sure it works properly before shipping!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i've just received this today but there is no wiring diagram :( if someone have the time to post this it would be great !! thanks
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Please notice that camera cable isn't correct, you must check the connector on the cable, the smaller one, the one that connects to the camera. You need to match the - with the black cable, the with the red cable and vout with the white cable. It works just fine after this.
I've also notice the transmitter releasing probably to much eat, will investigate more on this and will report back.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Check the connection of the camera. is possible that the site vcc invested Vout
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It works very well, but in deed, as some others said, there are 2 wires that needs to be swapped. The wire that goes to the camera has 3 colors (red , black -, and white VOUT). Red should be swapped with white. I have cut the wire to use the plugs and joined red with white and white with red. Now it works perfect. You don't need any special tools, just some isolation and a cutter/scissors.
With 2 cells lipo, the transmitter don't start. JST plug used by the transmitter is not common to the 3 cells LIPO's so be sure you have some plugs at hand.
I didn't made any range testing, but in house (concrete walls), I don't have any glitches!

I don't blame hobbyking for the cable because I happened to have another camera and pinout on the board fit the cables delivered by HK.
I guess there are 2 types of camera and the single mistake made by HK is the combo match, not the quality of the products.

The TX I got, has only 4 channels or 5. In the specs, it says 8 channels, but only 5 frequencies. Any how, it works perfect for the money.

Happy FPV everybody!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。