サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

900MHzのは200mWのTx / Rxの&1/3インチCCDカメラNTSC 520TVL

Generating Links

900MHzのは200mWのTx / Rxの&1/3インチCCDカメラNTSC 520TVL

価格:

Now save 節約 ¥0.00 ¥0.00

¥11,566.87
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
9171000009
送料無料したい? クリックする こちらへ 詳細情報を参照する
CCDカメラによる12チャンネルの900MHzのTx / Rxのビデオシステム。制限の少ないRFパワー出力を持つ国でのFPVシステムに最適です。

他の一般的なシステムとは異なり、我々は配線織機を生産しているとTxとカメラの互換性と同じ電圧になるようにカメラにそれが含まれていました。
あなたのカメラとTxを購入した場合は別途プラグ極性と電圧が非常に異なる場合があります。

含まれています。
1×ソニーCCD 1/3インチカメラ
1×900MHzの4チャネルビデオトランスミッター(200mWの)
1×900MHzの12チャンネルビデオレシーバ


カメラの仕様。
画像デバイス:1/3インチソニースーパーカラーCCDをHAD
ピクセル:752のx 582(NTSC)
同期: 内部同期
水平解像度:520TVライン
最低被写体照度:0.1Lux / F1.2
S / N比:48デシベル(AGC OFF / B / W OFF)より大きい
ホワイトバランス: 自動追尾ホワイトバランス
自動逆光補正: オン/オフ切り替え可能
レンズ:3.6〜6ミリメートル
入力電圧:DC12V
電流:5MA±80ミリアンペア
電子シャッター: オート
PAL:1/50 1 / 100,000秒
ビデオ出力:1.0VP〜p75Ω
動作温度:-10〜+ 50
サイズ:38のx 38ミリメートル
電源:12V / 150ミリアンペア
 
FPV Txの仕様。
チャンネル:4-Chの、AV同期
パワー:200mWの
入力電圧:12V
重量:18グラム
サイズ:31のx 88のx 8ミリメートル
周波数:0.9gのの0.910G、0.980G、1.010G、1.040G
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

valerian | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 18, 2016

Ran 20 min with white red reversed. Board was powered through the Video out pin.
It survived and going strong after I noticed the Video signal goes to a diode and and ground is middle.
Plug came out with the header's plastic so reversing it was a breeze.

Quality is good, will be used with a low quality capture board for live view so video quality does not matter.

Pin 1 of channel dip switch means channel two for some reason.

Joseph | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 12, 2016

4 stars in overall rating because the red-black-white cable going to the camera is still messed up. Even after years of having this problem they still haven't fixed it. I got mine spring of 2016 and still had to cut the red and white wires and switch and splice them together. I would recommend if you buy this, try the one channel setting on the tx and cycle through the channels on the rx. If you don't get picture I guarantee you it's because you have to switch the red and white wires. After I made the switch though, it works like a charm. Blows my mind why it's still shipped out like this.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 31, 2015

Works really well, just make sure that your transmitter and receiver are on the same channel and the antaneas are pointing in the same direction. The plug on the back of my camera came upside down, so if yours isn't working just slip the connector on the back off the pins and reorienthe it. For the price and the picture quality, it is great. Get a 150 degree 1/3" lens and it is an amazing setup. 4 stars only because my camera came a bit messed up, but as described above it was an easy fix.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 25, 2014

I received this system not too long ago and it is much better quality than I thought. The video is great. I even plugged it into my 50 inch plasma and was pleasantly surprised at the quality. The connectors are SMA which isn't clear in the description. Recommend.

otep78 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 12, 2014

Very good TX-RX and camera for FPV and great price

David | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 12, 2014

Came with wires reversed. Maximum effective range is 100 meters without changing antennas. Video Transmitter is really underpowered. Receiver works great. Camera lenses are plastic so I suggest you buying wide angle glass lenses. Camera works perfectly. Otherwise you can't beat that price

Michael | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jan 04, 2014

Just received my kit today. Like many of the other customers, my unit does not function. My troubleshooting has also tracked back to the Tx/camera/harness. I'll have to return. Sigh. Being a business owner, I know QC is very important. There was no documentation/QC card with this unit. HobbyKing do you have a standardized QC check on these products before they go out? Given the complaints listed here you should; this isn't right.

Jeremy | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 21, 2013

This thing is crap! i got one flight out of it before it quit working. and the range is horrible! don't waste your money. transmitter doesn't work anymore, poorly made, and the antenna snapped right off. tried to resolder but i only get about a 10 ft range now and the video signal is weak. trashing this POS

Jeandredubois | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 27, 2013

Best fpv combo out there. Rx is very light so not much extra weight is addes onto plane/quad. Just wish HK would stock 900mhz cloverleaf antennas. My range is 800m LOS (OSD) but I know with cloverleaf range will be 2kmplus so please HK also stock 900mhz Cloverleaf antennas

Ian | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 10, 2013

I am very impressed! First off: some technical information:

THE RECEIVER is center pin positive. It has a diode in the case so if you hook it up incorrectly it should be OK. It will work with 9v but the picture is a bit messed up like there are these lines of blur that showed up on my screen. Was picking up what the camera transmitted though! Use 12v for good picture.

The CAMERA: is 720p so it is widescreen and looks best on wide TVs. If you have a square TV get a regular cam as you won't have the same field of view and the regular camera looks almost as good on a square tube TV. The regular cam has markings on the board so you can see if you need to reverse the wires. This camera has no markings at all. ON THE CONNECTOR: the center pin is negative. The positive pin has a SMD diode (black chip with a slight white line ) on the camera side of the board, right after it connecting to the trace from the pin. The signal pin is not connected to anything on the camera side of the board. Sure it is soldered but the pad is isolatedthere are no traces connecting to it. It is connected only to the chips on the bottom the bottom. You may need a magnifying glass to see this...my board was blue and hard to see where traces began and ended. This should make it easy to tell if you need to reverse the wires on your connector.

ON THE TRANSMITTER, the yellow wire is for video and the white i

  1. 1
  2. 2
顧客ファイル
Manual Download [1989]
Channel Download [1]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!