New Items フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

900MHzのは200mWのTx / Rxの&1/3インチCCDカメラPAL 520TVL

900MHzのは200mWのTx / Rxの&1/3インチCCDカメラPAL 520TVL

Discontinued Product

Please continue searching for a similar product.
重量:
409 g
SKU:
CP200-520P
WANT FREE SHIPPING? Click here to find out more!
CCDカメラによる12チャンネルの900MHzのTx / Rxのビデオシステム。制限の少ないRFパワー出力を持つ国でのFPVシステムに最適です。

他の一般的なシステムとは異なり、我々は配線織機を生産しているとTxとカメラの互換性と同じ電圧になるようにカメラにそれが含まれていました。
あなたのカメラとTxを購入した場合は別途プラグ極性と電圧が非常に異なる場合があります。

含まれています。
1×ソニーCCD 1/3インチカメラ
1×900MHzの4チャネルビデオトランスミッター(200mWの)
1×900MHzの12チャンネルビデオレシーバ


カメラの仕様。
画像デバイス:1/3インチソニースーパーカラーCCDをHAD
ピクセル:752のx 582(PAL)
同期: 内部同期
水平解像度:520TVライン
最低被写体照度:0.1Lux / F1.2
S / N比:48デシベル(AGC OFF / B / W OFF)より大きい
ホワイトバランス: 自動追尾ホワイトバランス
自動逆光補正: はい
レンズ:3.6〜6ミリメートル
入力電圧:DC12V
電流:5MA±80ミリアンペア
電子シャッター: オート
PAL:1/50 1 / 100,000秒
ビデオ出力:1.0VP〜p75Ω
動作温度:-10〜+ 50
サイズ:38のx 38ミリメートル
電源:12V / 150ミリアンペア
 
FPV Txの仕様。
チャンネル:4-Chの、AV同期
パワー:200mWの
入力電圧:12V
重量:18グラム
サイズ:31のx 88のx 8ミリメートル
周波数:0.9gのの0.910G、0.980G、1.010G、1.040G
  • 単位 CP200-520P
  • Brand -
  • 容量(mAh ) -
  • 重量(g ) 409.00
  • 長さ 180.00
  • Width 70.00
  • 高さ 150.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

First one i orders was wired wrong ans burnt out due to poor wuality control. Got second one under warranty and gives a decent video pic quality but could use due to australian mobile network frequencie 900mhz-980mhz.

Things you might want to consider are
- interferance from aus 3G network
- uses a SMA antenna plug
- tx and rx use 12v and camera is 12v

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First one i orders was wired wrong ans burnt out due to poor wuality control. Got second one under warranty and gives a decent video pic quality but could use due to australian mobile network frequencie 900mhz-980mhz.

Things you might want to consider are
- interferance from aus 3G network
- uses a SMA antenna plug
- tx and rx use 12v and camera is 12v

works well but doesn't like being behind hard wood obsticals, definetly needs a better ariel as the stock one cuts in and out constantly

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

works well but doesn't like being behind hard wood obsticals, definetly needs a better ariel as the stock one cuts in and out constantly

THis is the second kit I buy, and I am happy with them !
Notice that now the receiver has an SMA plug for the antenna (no longer F-type), which is better.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

THis is the second kit I buy, and I am happy with them !
Notice that now the receiver has an SMA plug for the antenna (no longer F-type), which is better.

Completed my second run and can safley say this will make 5km with proper antennas.
First run I got 4.4km and the second run made 4.1km due to limited range on the my HK openLRS system..for a budget/cheap FPV setup, this is well worth $$.. Camera at 520tvl is a must have, they arent nearly as bad as everyone makes them out to be..

For this to be of any use at fpv, please replace the lense with a wide angle lense. And the wiptail stock antennas are useless... But there is many option for antennas on the net that will give you proper range.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Completed my second run and can safley say this will make 5km with proper antennas.
First run I got 4.4km and the second run made 4.1km due to limited range on the my HK openLRS system..for a budget/cheap FPV setup, this is well worth $$.. Camera at 520tvl is a must have, they arent nearly as bad as everyone makes them out to be..

For this to be of any use at fpv, please replace the lense with a wide angle lense. And the wiptail stock antennas are useless... But there is many option for antennas on the net that will give you proper range.

an excellent starter fpv setup. however the transmitter antenna is HUGE and very heavy. The camera quality is really poor also. I would recommend making a di-pole for this. a clover would work but it will have to be really big at 900MHz. the inverted di-pole is pretty easy. each side 3.02" and 180*. made a world of difference. There are videos on youtube on how to make one. but for what it is and the price. I say, excellent value.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

an excellent starter fpv setup. however the transmitter antenna is HUGE and very heavy. The camera quality is really poor also. I would recommend making a di-pole for this. a clover would work but it will have to be really big at 900MHz. the inverted di-pole is pretty easy. each side 3.02" and 180*. made a world of difference. There are videos on youtube on how to make one. but for what it is and the price. I say, excellent value.

Tout bien arriv en suisse... Super produit de prime abord. Qualit de l'image parfaite aprs rglage de loptique. Contrairement ce qu'on trouve sur ce forum, le cble de la camera est mont juste: blanc coter long de la platine de la camera. La polarit 12V du Rx n'tant pas repre, le est au centre. Merci Hobbyking, reste insr le OSD et a monter le tout dans le planeur ...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Tout bien arriv en suisse... Super produit de prime abord. Qualit de l'image parfaite aprs rglage de loptique. Contrairement ce qu'on trouve sur ce forum, le cble de la camera est mont juste: blanc coter long de la platine de la camera. La polarit 12V du Rx n'tant pas repre, le est au centre. Merci Hobbyking, reste insr le OSD et a monter le tout dans le planeur ...

Just received the set and did a little testing on board a RC car. Very good video quality - displayed on a HD TV set it's close to that of my HD camera! Range seems to be OK; Using it in GSM 900 country!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just received the set and did a little testing on board a RC car. Very good video quality - displayed on a HD TV set it's close to that of my HD camera! Range seems to be OK; Using it in GSM 900 country!!!

Very poor product, no docs, no DC adapters, no battery with same plug, no polarity and signal marks in Tx and Camera. And finally doesn't work.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very poor product, no docs, no DC adapters, no battery with same plug, no polarity and signal marks in Tx and Camera. And finally doesn't work.

Received 520P 900 200mW Tx/Rx and 1/3-inch the PAL CCD chamber. Excellent piece. First it was packed so well that even if a parcel would throw about the earth, the equipment wouldn't be damaged. Secondly, all electric connections are executed so that it is not necessary to think at all that where to include. There is no risk to mix polarity of a wire and, thereby to burn equipment. In the third, the weight of the chamber and the transmitter is so small that won't be big load of any plane. The unique shortcoming - the heavy aerial. It can be possible as that to solve this problem. Well and certainly video signal transfer - it is qualitative, without hindrances and on decent distance. Tests while took place in the apartment, flight weather here will be established, I will test in flight on the trainer of "Cessna". Thanks of HobbyKing for fine equipment for FPL of flights!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received 520P 900 200mW Tx/Rx and 1/3-inch the PAL CCD chamber. Excellent piece. First it was packed so well that even if a parcel would throw about the earth, the equipment wouldn't be damaged. Secondly, all electric connections are executed so that it is not necessary to think at all that where to include. There is no risk to mix polarity of a wire and, thereby to burn equipment. In the third, the weight of the chamber and the transmitter is so small that won't be big load of any plane. The unique shortcoming - the heavy aerial. It can be possible as that to solve this problem. Well and certainly video signal transfer - it is qualitative, without hindrances and on decent distance. Tests while took place in the apartment, flight weather here will be established, I will test in flight on the trainer of "Cessna". Thanks of HobbyKing for fine equipment for FPL of flights!

Good system for the money. I got rid of the giant coaxial antenna and soldered a 1/4 wave antenna directly to the tx board. That took care of the overheating and lengthened the range a good bit. Camera isn't half bad, again it's what you pay for. Powering the camera/tx off the balance plug of the main battery and the receiver off an extra 3s. Overall a great value. Flies all the way up to the clouds for $65.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good system for the money. I got rid of the giant coaxial antenna and soldered a 1/4 wave antenna directly to the tx board. That took care of the overheating and lengthened the range a good bit. Camera isn't half bad, again it's what you pay for. Powering the camera/tx off the balance plug of the main battery and the receiver off an extra 3s. Overall a great value. Flies all the way up to the clouds for $65.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!