Become a Dealer ブログ
新規登録

合計金額

$0.00

ショッピングカート 0 ショッピングカート 0 Loading...

90ミリメートルEDFジェットエアが後退(カモ版)(PNF)/ワット

Generating Links

90ミリメートルEDFジェットエアが後退(カモ版)(PNF)/ワット

 
価格:

Now save 節約 $0.00 $0.00

$259.99
出荷先:
  • USA
  • Global
購入済み Discontinued Product

Please continue searching for a similar product.
1 year warranty
SKU:
177000002
送料無料したい? クリックする こちらへ 詳細情報を参照する

アクセサリー

優れたパフォーマンスを提供しています非常に大きなEDFジェット、巨大な存在オンエアと地面にとPNF、迅速なビルドであることの両方。 6S Lipolyで使用する場合、電源が十分にV2 1770kv / 90ミリメートルファンコンボからタップであり、スローフライ能力も、事前に当てはめられたフラップの印象的な礼儀ですが、それはこの素晴らしい探しジェットは、すべてについて高いですものではありませんスピードと高manevoeverabilityは、ゲームの名前です!

このモデルは、すべての移動水平尾翼だけでなく、光飛行重量と高推力EDFユニットと組み合わせてラダー、エルロンを、特徴とし、パイロットの最も要求の厳しい満たす必要があります。空気はなんと100A ESCは、すべての信頼性の高い大規模なジェットで生きやすいまで追加、良い品質のサーボの、後退します。これはあなたの次のクラブ例会でみんなを感動ますエキサイティング探しビッグサイズEDFモデルです!

仕様:
翼幅:923ミリメートル
長さ:1436ミリメートル
ウイングロード:100グラム/ dm 2で
フライング重量:2200グラム
チャンネル:6CH
モーター: ヒートシンクと1770kv 3674ブラシレスInrunner(V2)
ESC:100A
サーボ:9×9グラム
EDF:90ミリメートル

必須:
あなた自身の6CHのTx&Rxの
バッテリー3700mAhの22.2V 6S 25C

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

abagnalejr123 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 13, 2013

Warning:
The EDF unit that is supplied with the kit is brittle & will shatter in the first 3 minutes of full power use (I'd done some research and was expecting this, so purchased this kit on the understanding that it would need replacing). What I was not prepared for, however, was the sub-standard quality of the retracts and struts. The springs are not strong enough to lock the gear in the down position, hence the nosewheel collapsed on the first landing. ALSO, the struts have been "downgraded" from the ones that are commomnly found on this model. It would seem that in an attempt to save weight, to make the newer air retract units work, the nice "turned aluminium" struts I was expecting, were absent. In their place was a lightweight wire nosewheel strut, and tubular main stuts, with absolutely no spring suspension incorporated whatsoever. Completely unsatisfactory. Because of the lack of suspension, the shock forces are transmitted straight to the retract mounts, which will fail if not strengthened.

abagnalejr123 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 13, 2013

Warning:
The EDF unit that is supplied with the kit is brittle & will shatter in the first 3 minutes of full power use (I'd done some research and was expecting this, so purchased this kit on the understanding that it would need replacing). What I was not prepared for, however, was the sub-standard quality of the retracts and struts. The springs are not strong enough to lock the gear in the down position, hence the nosewheel collapsed on the first landing. ALSO, the struts have been "downgraded" from the ones that are commomnly found on this model. It would seem that in an attempt to save weight, to make the newer air retract units work, the nice "turned aluminium" struts I was expecting, were absent. In their place was a lightweight wire nosewheel strut, and tubular main stuts, with absolutely no spring suspension incorporated whatsoever. Completely unsatisfactory. Because of the lack of suspension, the shock forces are transmitted straight to the retract mounts, which will fail if not strengthened.

guitarPlaya | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 04, 2012

Maidened this morning! Excellent! Fast agile nimble. Slats and flap exciting no electronic or mechanical issue truly PNF!

guitarPlaya | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 02, 2012

OK! Got it today. Out of box. Nickle size 3mm deep divit and inside flap hinges Unglued left wing. Easy fixes. Comes. With decent instructions and CG. rugged electric retracts. Will inspect all electronics run voltage and current checks on motor and esc program esc for 3.7 cutoff voltage. Insure all servos center without chatter or buzz.set end points to conservative degrees.. Set dual rate and expo to restrictive values. For leisure maiden. Increase values for sport flying over time. Limit flight to 2mins on 4k 6s 20c turnigy flight pack

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 24, 2012

ok plusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplus

Martin74 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Apr 11, 2012

- EDF broke while testing outside the plane due to poor balance of the fan, motor shaft also bend and broke

- Air retracts with air leaks (joints between tube and valve)

- Steering gear need rework its not reliable

- Poor paint finish

- Without instruction manual (cg point ? throws ? )

PeterVau | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jan 19, 2012

18-01-2012 Just got this Camo F-16 and it is an awesome kit and plane! Excellent painting, parts fits - a great design effort to do everything very well. This version now has air retracts, which probably work totally fine, but I will change them out to servoless (HK-312's I think). The nose gear do not use a servo on the leg, but now it is in the body and uses a pull-pull wire system for steering. The tail box blocks and collars do not bind as in earlier versions. The landing gear looks strong, it is sprung (oleo's?). It basically looks like Starmax fixed all the prior version shortfalls. If you are thinking about this plane, stop thinking... BUY it, you will love it.

Tartago | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Dec 29, 2011

Very nice big jet.



I fly mine using a nano 5000 6s, no more than 3min or the battery will puff. the EDF is very hungry.



I changed the mini air retracts with mid size servoless retracts and now it works much better.



I needed to add a BEC because the supplied ESC is opto.

Remember to isolate/cut the red wire coming from the ESC to the Rx. I had issues due to the BEC fighting with the ESC for servo control. I almost throw away the ESC.



Flying is very easy. I even landed with just one elevator half. Better reinforce the elevator plastic bushing that secures it to the fuse. I put a strip of thin ply on top.



For landing keep some speed (20pcnt) and she will land like the real thing.



Remember to give some height to the front LG. Mine was all equal and the plane took 100' to suddenly jump into the air. I gave 1cm more and problem solved.



I installed a lighting system for the looks.

nicola | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Nov 13, 2011

1)Consiglio non mettere i missili sotto le ali per il collaudo 2) carrelli scarsa qualit sostituire 3) spiegazioni del baricentro batteria sbagliata lento e molto pesante in volo 4) non mi sono fidato della ventola l'ho sostituita con quella della freewing. Da qui il mio giudizio negativo

Sean | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Oct 25, 2011

Bought this (the grey one) a few weeks ago & just finished putting it together. Have not got a 6 cell yet so no ESC test but i tested the motor with a 3 cell & worked so a working motor is always good. All servos working.
No instructions on how to fill the air retracts so unsure if they work yet but look strong as its all alloy & metal.
The only real down side to this product that i can see at the moment is the wings & tail fin glue on so when its together then thats it..thats the size it stays.
Taking it for a test flight at local field in 6 days provided lipos arrive.

  1. 1
  2. 2
  3. 3
顧客ファイル
Manual Download [2904]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!