サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

HobbyKing 3Dプリンタフィラメント1.75ミリメートルABS 1KGスプール(ホワイト)

Generating Links

HobbyKing 3Dプリンタフィラメント1.75ミリメートルABS 1KGスプール(ホワイト)

価格:

Now save 節約 ¥0.00 ¥0.00

¥3,131.37

This item is no longer available.
Updated or similar products shown below:

ABS White 1KG 1.75mm HobbyKing Premium

  • 現在の状況:
    在庫あり
    SKU:
    9913000110-0

    Now save 節約 ¥2,194.62 ¥2,194.62

    Special Price ¥1,563.33 ¥1,563.33

    You save 節約 ¥2,194.62 ¥2,194.62

    Was  ¥3,757.95

現在の状況:
在庫切れ!
SKU:
741000069-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

HobbyKing 3Dプリンタフィラメント1.75ミリメートルABS 1KGスプール(ホワイト)

HobbyKingは、あなたが一日と一晩を印刷する必要があります価格で3Dプリンタのフィラメントの巨大な新しい範囲で出てきました。

範囲は、PLA、ABS、柔軟、変色、ルミナス、ナイロン、ポリカーボネート、アセタール(POM)、メタ​​ルコンポジットおよび印刷金型のためであっても、水溶性フィラメントをカバーしています。だから、あなたは心を持っているすべてのプロジェクトのためのフィラメントがあります。 HobbyKingフィラメントは、安定した融点、良好な丸い形と一貫性の流量のための最も重要なのは0.05ミリメートル均一な直径の公差を持っています。

ABS:

ABSは、耐久性のあるアイテムが必要とされる機械的な現実世界の使用プリントのための素晴らしいプラスチックです。これは、いくつかは、マルチコプターフレームとギアのために、それは完璧な作りストレス下に与えています。 ABSは、いくつかのアプリケーションに、より適して高い融点を有しています。

ABSで印刷するためには、適切なベッドの接着のための加熱された印刷ベッドまたはカプトンテープを持っていることをお勧めします。 ABSはまた、わずかな臭気を持って換気の良い部屋が推奨されますので、印刷することができたとき、それは印刷が終了した臭いを持っていないことに注意してください。

ABSは、PLAとは違ってダイヤルインを取得することが少し難しいですが、一度印刷を設定一致しており、プリントが本当に現実の世界使用可能です。この材料のための他の人気の用途は、子供のためのR / Cのスペアパーツ、ビルディングブロックやおもちゃです。

3Dプリントは、子供のためのおもちゃを作ることに部品の試作から用途の広い範囲で楽しくてエキサイティングな趣味です。あなたのアプリケーションに適したフィラメントを選ぶことは非常に重要です。

特徴:
•安定した融点
•グッド丸い形状
•均一な直径の公差0.05ミリメートル
•一貫性のある色

仕様:
フィラメント材質:ABS
融点:230℃
印刷温度:230〜260°C
フィラメント直径:1.75ミリメートル
数量:1KG
カラー: ホワイト

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Valeri | 確認済みの購入者

  • Overall
  • Quality
  • Value

4

Apr 15, 2021

4

Lukrix | 確認済みの購入者

  • Overall
  • Quality
  • Value

Very good

Apr 22, 2019

Difficult to find the right setting for this filament but there is enough there for many tests, and it's cheap too.

Jan | 確認済みの購入者

  • Overall
  • Quality
  • Value

Yup it prints on a X5S

Apr 19, 2019

Works great but needs 245-250C for good layer bonding. I print with a bed temperature of 35C, crazy cool right? on vinyl sign tape and it sticks like crazy once you get the first layer close enough to stick.

Patryk | 確認済みの購入者

  • Overall
  • Quality
  • Value

Pretty darn good

Feb 10, 2019

Prints like a charm on Anycubic i3 Mega. Extruder 255C, bed 110C, simple enclosure and I can hardly see any warping. Seen some cheap PLA warping more than this stuff, actually. And doesn't smell as bad as ABS i printed years back. Great stuff, really.

Lukas | 確認済みの購入者

  • Overall
  • Quality
  • Value

Great for the price

Oct 08, 2018

So inexpensive using a Prusa P3 steel clone with a bunch of tweaks. I run this hot around 250-260 with 10% fan(after first layer or two), that works well for me to balance quality and strength. If strength isn't important then dropping the temp down will give better surface finish to the parts.
Overall though good stuff, ordering 5 more spools right now.

Michael | 確認済みの購入者

  • Overall
  • Quality
  • Value

Prints like a Charm on CR-10S

Oct 07, 2018

First test on CR-10s without housing went good on a small rim diameter 50mm hight 5mm.
No warping and good surface quality so far.
Nozzle 260°C
Bed 100°C
Bed Buildtak
Housing None

Major | 確認済みの購入者

  • Overall
  • Quality
  • Value

Good for this price

Jun 13, 2018

I printed this with my Anet A8 printer and with Mk8 extruder. First time i think its trapped a lot of moisture, while is it popping. After some print i figured out that is not moisture, while the gap happening on the same side (other sides are ok). I turned off the retraction and all gap dissapeared.
I printed it at 235°C and 90°C heatbed temp.
The other solution to eliminate the gap maybe go lower temp with the hotend and i can use the retraction for less stringing.
Isn't warping if you use hairspray on glass sheet. Its holding very strong the part on the heatbed, but after cooling down you just need to take the part without force.

Major | 確認済みの購入者

  • Overall
  • Quality
  • Value

Good for this price

Jun 13, 2018

I printed this with my Anet A8 printer and with Mk8 extruder. First time i think its trapped a lot of moisture, while is it popping. After some print i figured out that is not moisture, while the gap happening on the same side (other sides are ok). I turned off the retraction and all gap dissapeared.
I printed it at 235°C and 90°C heatbed temp.
The other solution to eliminate the gap maybe go lower temp with the hotend and i can use the retraction for less stringing.
Isn't warping if you use hairspray on glass sheet. Its holding very strong the part on the heatbed, but after cooling down you just need to take the part without force.

Simon | 確認済みの購入者

  • Overall
  • Quality
  • Value

Good filament

Feb 05, 2018

Printed at 250°C and bed heated at 110°C and got nice prints, without too much warping.
Printed about 500g so far without clogging.
Good for everyday prints, but not enough for really precise prints.

gaekay | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 23, 2016

matière parfait pour nos impression 3D, utilisé sur malyan M150, M180 et minifabrikator!! prix plus que attractif dans un support parfait. j'adore !! je le recommande

  1. 1
  2. 2
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!