Aerostar RVS 80A Electronic Speed Controller (2~6S) with 5A BEC w/XT90
Aerostar RVS 80A Electronic Speed Controller (2~6S) with 5A BEC w/XT90
The Aerostar RVS range of brushless speed controllers is designed for fixed-wing aircraft. They feature super-smooth startup, linear throttle response, multiple protection features and a reverse function designed with seaplanes in mind, but also useful for other applications like Short Take-Off and Landing (STOL). Always ensure your motor has stopped before going into reverse.
Although primarily designed for fixed-wing aircraft they do also include a soft start and heli mode making them a good low-cost alternative ESC for your next helicopter project. If you don't need to use the reverse function, simply don't connect the second lead to your receiver and the ESC will operate as a normal one.
Installation is very straightforward as these speed controllers come "plug & play", no soldering required, they are pre-fitted with an XT90 connector at the battery end and 4mm gold connectors for the motor.
Programming can be done either using the transmitter and listening to the tones or you can use the dedicated programming card (see "Related Items").
Features:
• Reverse function
• Pre-installed motor and battery connections
• Propeller Brake
• Battery type (NiMH or LiPo)
• Low voltage cut-off
• Adjustable motor timing
• Soft start for gearboxes and helicopters
• Heli mode
• Motor rotation
• Overheating and lost signal protection
• Low voltage cut-off type
Default settings:
• Brake: Off
• Battery type: Lipo (auto cell detect)
• Low voltage cut-off: 3.2V (60%)
• Timing: Automatic
• Startup acceleration: Soft
• Heli mode: Off
• Motor rotation: Forward
• Frequency: 16Hz
• Voltage cut-off: Reduce power
Specs:
Type: Aerostar RVS 80amp electronic speed controller
Input Voltage: 8.4V to 25.2V / 2~6 lipoly cells / 5~18 nimh cells (6~16V)
Continuous Current: 80A
Burst Current: 90A (10secs)
BEC Output: 5.5V/5A
Programmable: Yes
Battery Connector: XT90
Motor Connectors: 4mm bullet (no lead)
Rx Connector: JR type
Dimensions: 68 x 37 x 14mm
Battery Lead Length: 80mm
Rx Lead Length: 330mm
Weight: 87g
Warning: Reverse function should not be activated until the motor comes to a completed stop, otherwise it will damage both motor & ESC.
BL | 確認済みの購入者
-
Overall
-
Quality
-
Value
wrong controller
Sep 25, 2021
Ralph | 確認済みの購入者
-
Overall
-
Quality
-
Value
Excellent product
Aug 05, 2021
Jan | 確認済みの購入者
-
Overall
-
Quality
-
Value
Usefull
Jun 05, 2021
80a speed controller | 確認済みの購入者
-
Overall
-
Quality
-
Value
Ok
May 27, 2021
Shel | 確認済みの購入者
-
Overall
-
Quality
-
Value
For my Propdrive V2 4248 650KV
May 20, 2021
SandyGabby | 確認済みの購入者
-
Overall
-
Quality
-
Value
Heavy duty
May 14, 2021
SandyGabby | 確認済みの購入者
-
Overall
-
Quality
-
Value
Lite weight
May 14, 2021
Simon | 確認済みの購入者
-
Overall
-
Quality
-
Value
My order
Mar 14, 2021
grantNZ | 確認済みの購入者
-
Overall
-
Quality
-
Value
worked as it should
Jun 15, 2020
Lloyd | 確認済みの購入者
-
Overall
-
Quality
-
Value
Great product
Nov 04, 2019