サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

AX1304-2000kvマイクロブラシレスアウトランナーモーター(6.5グラム)

Generating Links

AX1304-2000kvマイクロブラシレスアウトランナーモーター(6.5グラム)

価格:

Now save 節約 ¥0.00 ¥0.00

¥1,763.24
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
031000162
送料無料したい? クリックする こちらへ 詳細情報を参照する

これらの小さな屋内モデルのための理想的である(そのサイズのために)強力な軽量のマイクロブラシレスモータ。独自の軽量マウント、プロペラセーバーと3ピンのコネクタが付属しています。

仕様:
モデル:AX1304-2000
KV:2000rpmで/ V
重量:6.5グラム(ワイヤーと、マウントおよびプロパセーバー)
電圧:3〜7.4V
無負荷電流:0.3A
最大電流:4A
最大電力:26ワット
抵抗:1.06オーム
軸径:(プロペラセーバーなし)1.5ミリメートル
モーター直径:16.4ミリメートル
ボルト穴センター:21ミリメートル
取付ボルトサイズ:1.5ミリメートル
コネクタ:3ピン
推奨ESC:6A
推奨プロップ:6×3(7.4V)2.3A

  • KV ( RPM / V ) 2000.00
  • 最大電流( A ) 4.00
  • 抵抗( MH ) 1.00
  • 最大電圧( V ) 7.00
  • 電力( W ) 26.00
  • シャフトA (ミリメートル) 1.50
  • 長さB ( mm)の 10.00
  • 直径C (ミリメートル) 16.00
  • ことができます長さD (ミリメートル) 7.00
  • 総丈E (ミリメートル) 20.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

john | 確認済みの購入者

  • Overall
  • Quality
  • Value

nice motor for micros

Jan 03, 2020

overall a good motor. a little under powered on 1s but 2 is is great. supplied o rings are way to stiff and almost impossible to use. what I use is a piece of rubber hose bought at hardware store. get it 1" thick and cut tons of o rings using scissors from a 1 foot piece.

john | 確認済みの購入者

  • Overall
  • Quality
  • Value

nice motor for micros

Jan 03, 2020

overall a good motor. a little under powered on 1s but 2 is is great. supplied o rings are way to stiff and almost impossible to use. what I use is a piece of rubber hose bought at hardware store. get it 1" thick and cut tons of o rings using scissors from a 1 foot piece.

John | 確認済みの購入者

  • Overall
  • Quality
  • Value

Nice motor

Mar 20, 2017

Impossible to fit 'O' ring one side as head of screw is tight to spoke of motor.
Removed and filed a flat on screw head. re-inserted screw and stretched 'O' ring over
head where flat is. 'O' ring is slightly too large for small props that's why 3 stars overall.

ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!