ビッグスティックレーザーカットバルサキット1060ミリメートル（キット）

• Overall
• Quality
• Value

bien pour pas cher !!

Dec 14, 2016

Bonjour
un assez bon kit question qualité, mais quelques changement sont nécessaires, train atterrissage trop souple, trop court, je n'ai pas fait de renfort d'aile et je vais peu être coffret le fuselage vu la motorisation de 2200 kv en 3s ça devrait le faire !
la notice une grosse blague plus petit tu meurt !! à revoir au plus vite !!!!!!!!!!!!

• Overall
• Quality
• Value

Customer Rated

Oct 08, 2016

Just received the kit I ordered 1-2 days ago! The wood is of excellent quality and the cut superb. I intend to nitrolise it with APC 12A 2 stroke engine, modify it with flaps and equip it with gyro. Covering will be transparent orange covering material bought from HK earlier. I plan to configure this plane to have that retro 70's look which I miss badly.

• Overall
• Quality
• Value

Certified Buyer Rated

Jul 30, 2016

Best plane in this size I've ever had! Was 3s with NTM 28-26 1350kv, 30A speed control and 8" slow flier prop. Just ordered two more. 4s ready!

• Overall
• Quality
• Value

Customer Rated

Dec 02, 2015

j'ai oublier la notice ! plus petit a serait possible ??????
une vrai blague ! un gros effort est faire !!!!!
Hobby King demandez votre fournisseur de revoir une vrai notice sur plusieurs feuillets ou un PDF ! pour tre dans le "Vent" :)
BAD NOTICE - BAD NOTICE ......

• Overall
• Quality
• Value

Customer Rated

Dec 02, 2015

Bonjour
un assez bon kit question qualit, mais quelques changement sont ncessaires, train atterrissage trop souple, trop court, je n'ai pas fait de renfort d'aile mais a me tarrode (longeron carbone) et je vais peu tre coffret le fuselage vu la motorisation de 2200 kv en 3s a ne devrait gner la bte ... aprs entoilage et on verra bien !

• Overall
• Quality
• Value

Customer Rated

Sep 21, 2015

Fabulous plane. Clocked it at 86mph. I've installed a 10mm x 600mm dowel into the main wing as a spar as it doesn't come with one. Turnigy aerodrive 28/26 2200kv motor, 7x4e APC prop, and a 3s 2200 Turnigy LiPo. I can get 12 mins slow flight, and 8 mins aggressive. As I'm using FrSKY, I have programmed flaperons which are a must really, as the plane just doesn't lose the speed on finals. Over all a smashing plane!

• Overall
• Quality
• Value

Customer Rated

Mar 25, 2015

After buying this plane for my brother, and after he put it together, he wanted me to maiden this plane, I did and this is what I think, This plane is as easy to fly as any trainer, it is also , if you want, quick and acrobatic to some extent, not 3D but a joy to fly, Recommended!

• Overall
• Quality
• Value

Customer Rated

Jan 20, 2015

The kit showed up in good shape and in a timely fashion. I un-boxed it and took inventory, all good. Alright, step 1 ... the instructions...."assemble the airplane" Wow! they really phoned it in on the instructions. If you don't have previous experience with balsa airplane construction, this is not the place to start. If you do .... The kit went together easily and quickly. good quality balsa and the laser cuts were clean. Basic box fuselage was pretty straight forward, the wing... well ... all the sheeting was about 1/4" too short so I replaced it with new from the LHS, no problem...I didn't like the way they had me building the ailerons, so... I got some tapered stock, also from the LHS, and just cut the ailerons from that, it was allot easier. Fabed a "bolt down" wing instead of using the rubber band method. I added a steerable tail wheel and "upgraded" the landing gear with a little bit "beefier" one I had from an old crashed plane of about the same size, with some bigger wheels for the grass runway. otherwise...built per the plans (or lack there of) ;)
Using the recommended 2200KV Motor, 40amp Plush ESC, 2200/3S Li-Po and a 7X4 prop (all from Hobby King).
All said and done ... the "up weight" came in at 1lb. 4oz.
It fly's great, handles just like you think it will, Landing requires a little throttle all the way down, tends to stall out a little on a dead stick approach.
A

• Overall
• Quality
• Value

Customer Rated

Jan 12, 2015

This plane fly,s like a trainer, I got this for my brother, and I had the first flight... It was sweet!! I need one for myself! but, If the old lady found out ... !I have bought over 22 planes these last two year's and this one is as smooth as a trainer,, I recommend!

• Overall
• Quality
• Value

Customer Rated

Aug 10, 2014

Compre dos kits y son de muy buena calidad tanto la madera como el cut, eso s no es para un principiante ya que slo tiene unas instrucciones y no trae un plano!