サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

BLHELI-S 30A 2-6S

Generating Links

BLHELI-S 30A 2-6S

価格:

Now save 節約 ¥0.00 ¥0.00

¥2,782.15
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
9351000088-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

Turnigy MultiStar BLHeli-S Rev16 ESC's are the latest generation of speed controllers designed specifically for multirotors (drones). They are super simple to install and very easy to set up. 

These ESC's have superior performance and utilise hardware generated motor PWM for smooth throttle response. Another feature of these ESC's is Oneshot125 which is a faster communication protocol between the flight controller and the ESC on your multirotor. It allows the flight controller to send commands to the motor quicker allowing faster acceleration, regenerative braking and active freewheeling.

The BLHeli-S Rev16 30A has masses of programming parameters (see the list below) and can be programmed easily from your transmitter or using the MultiStar programming card. The ESC comes pre-tinned and solder ready, all you need to do is solder the supplied wires to the ESC and then add the plugs/sockets of your choice. With its small lightweight design, these ESC's will have you racing faster without breaking the bank.

This is the upgraded 30A version, it is slightly larger but is capable of handling up to 6S.

These ESCs can be flashed with the latest DShot150 and DShot300 firmware.

Features:
• Small and lightweight (only 15.8g)
• S code for superior performance
• Smooth and linear control
• Oneshot125 for rapid throttle response
• Compatible with DShot150 and DShot300 firmware
• Regenerative braking
• Active freewheeling
• Beacon functionality
• Stalled motor protection
• Throttle signal loss protection
• Safe power-on (throttle lockout)
• Thermal protection

Programming Parameters:
• Startup power
• Commutation timing
• Demag compensation
• Rotation direction
• Beep strength
• Beacon strength
• Beacon delay
• Throttle range
• Thermal protection
• Low RPM power protection
• Brake
• LED control

Specs:
Constant Current: 30A
Peak Current: 35A
Input Voltage: 2~6S (7.4~22.2V)
BEC: None
Dimensions: 35 x 19mm
Weight: 15.8g

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Pete | 確認済みの購入者

  • Overall
  • Quality
  • Value

Easy to install, worked a treat

Nov 23, 2019

No probs, used these on an S500 frame for my 1st ever build. These are opto ESCs so no power connection to FC so you will need to use a Ubec to power your FC.

Pete | 確認済みの購入者

  • Overall
  • Quality
  • Value

Easy to install, worked a treat

Nov 23, 2019

No probs, used these on an S500 frame for my 1st ever build. These are opto ESCs so no power connection to FC so you will need to use a Ubec to power your FC.

Pete | 確認済みの購入者

  • Overall
  • Quality
  • Value

Easy to install, worked a treat

Nov 23, 2019

No probs, used these on an S500 frame for my 1st ever build. These are opto ESCs so no power connection to FC so you will need to use a Ubec to power your FC.

Gan | 確認済みの購入者

  • Overall
  • Quality
  • Value

Value for money

Sep 03, 2019

Good value for the money and reliable.

Várkonyi | 確認済みの購入者

  • Overall
  • Quality
  • Value

Good

Dec 24, 2016

Very good ESC, I hope it won't die :) Also, it is pretty big...

顧客ファイル
Turnigy MultiStar.pdf Download [2]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!