New Items フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

BMS-760DMGロープロファイルデジタルサーボ(メタルギア)5.6キロ/ .18sec / 34グラム

BMS-760DMGロープロファイルデジタルサーボ(メタルギア)5.6キロ/ .18sec / 34グラム

Now save save AU$0.00 AU$0.00

AU$47.76
ステータス:
在庫切れ!
重量:
63 g
SKU:
BMS-760DMG
WANT FREE SHIPPING? Click here to find out more!
BMS-760DMGロープロファイルデジタルサーボの5.6キロ/ .18sec / 34グラム
低電子インピーダンスと精度の動きと、これらのロープロファイルサーボは高性能F3A精度曲技飛行の使用のために設計されています。彼らはまた、現実的な方法で機械的な後退ギアを移動するための素晴らしい選択肢です。
サーボは自動的にユーザー」のトランスミッタのパルスのタイミングを学び、信号にするたびにロックします。サーボはまた、フェイルセーフ機能を備えたCPUの信号バッファを含みます。モーターは、より良好な電気伝導性のために2PEW薄い被覆線で巻かれ、劣化することなく、120°C以上に耐えることができるされています。
サーボは付属品パッケージとユニバーサルJR /ハイテック「S」が付属しています
1.メタルギア
ベアリング2.ダブルM9.6ボール(SI-油)
低RFノイズ(CE認定)3. 3極の高トルクモータ
防水ケース4.ラバーシール
5.双葉互換性のある25の歯の出力スプライン
6.ヘビーデューティーサーボケース
7.デジタル制御IC - 12ビットのデータ転送にSOPパッケージ
図7(a)のピーク負荷を処理することができます。8. MOS-FETモータドライバチップ
超正方形のPWM信号9.デジタルモータードライブ
サーボセンターパルス幅の10自動決意
光と強いC95材料と組み合わせたアルミニウム6061材の11メタルギア


重量:34グラム/ 1.19オンス
寸法:42 X 21.5 X 22ミリメートル/ 1.65のx 0.85のx 0.87インチ
4.8V時のトルク:5.6キロ/ cmで、79オンス/中
6.0V時のトルク:7.2キロ/ cmで、112オンス/中
4.8V速度:無負荷で0.18秒/ 60°
6.0V速度:無負荷で0.16秒/ 60°
  • 単位 BMS-760DMG
  • Brand Bluebird
  • 重量(g ) 63.00
  • 長さ 90.00
  • Width 32.00
  • 高さ 64.00
  • トルク(キログラム) (分0.01キロ) 7.20
  • スピード(秒/ 60deg ) 0.16
  • ( MM ) 27.00
  • B ( mm)と 43.00
  • C ( mm)と 24.00
  • D ( mm)と 21.00
  • E ( mm)と 55.00
  • F ( mm)と 16.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

At first glance, it seemed perfect. It was purchased 5 units. Unfortunately during operation showed that the vibration increases current consumption of up to 1A or more per servo. Due to the current consumption necessary for powerful on-board power supply, so they had to change to another brand .. with which no such problems. Other companies servo under the same conditions required only to 0.4 A current. Do not trust the current consumption, in addition it requires very frequent on-board battery charging.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

At first glance, it seemed perfect. It was purchased 5 units. Unfortunately during operation showed that the vibration increases current consumption of up to 1A or more per servo. Due to the current consumption necessary for powerful on-board power supply, so they had to change to another brand .. with which no such problems. Other companies servo under the same conditions required only to 0.4 A current. Do not trust the current consumption, in addition it requires very frequent on-board battery charging.

I have bought 3 of them for Tucano 60. Two are used for retracts (with "Turnigy 3 Channel Servo Speed/Direction Regulator" from HK) and one for elevator. Powered from 6V regulated and Assan X8 R9 9Ch 2.4GHz Receiver. I have noticed to issues with that configuration:
1. BMS servos love to buzz. Even not loaded and centered they make sound most of the time.
2. Elevator servo do not initialize after powering on (behaves like dead) unless I move the stick all the way to extreme position. After that servos "wakes up" and works normally.

These two issues could be compatibility issue with Assan Rx as these servos work normally with other receivers (analog and digital) and servo tester. Other servos I have (analog and digital) work normally with that Assan 9ch Rx.
I will keep these servos for gear as they always start with extreme position (gear is up or down), but one will go away from elevator as at "low rate" the servo does not "wake up".

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have bought 3 of them for Tucano 60. Two are used for retracts (with "Turnigy 3 Channel Servo Speed/Direction Regulator" from HK) and one for elevator. Powered from 6V regulated and Assan X8 R9 9Ch 2.4GHz Receiver. I have noticed to issues with that configuration:
1. BMS servos love to buzz. Even not loaded and centered they make sound most of the time.
2. Elevator servo do not initialize after powering on (behaves like dead) unless I move the stick all the way to extreme position. After that servos "wakes up" and works normally.

These two issues could be compatibility issue with Assan Rx as these servos work normally with other receivers (analog and digital) and servo tester. Other servos I have (analog and digital) work normally with that Assan 9ch Rx.
I will keep these servos for gear as they always start with extreme position (gear is up or down), but one will go away from elevator as at "low rate" the servo does not "wake up".

These are a perfect replacement for the retract servos in the Durafly Spitfire.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These are a perfect replacement for the retract servos in the Durafly Spitfire.

Great servos! Have two in the Paramotor. Very strong and Fast! Low twitch and not as loud as some say.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great servos! Have two in the Paramotor. Very strong and Fast! Low twitch and not as loud as some say.

raisonnable pour le prix a voir en fonctionnement

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

raisonnable pour le prix a voir en fonctionnement

Great servos good power use in my 2M Salto sailplane for trailing edge breaks.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great servos good power use in my 2M Salto sailplane for trailing edge breaks.

Bought 5 of these for a 26cc yak. The weight vs performance is amazing, and they center really well, and are fast and torqy. replaced a bunch of hitec metal gear servos with them. Took my yak from 9lb 4oz to 8lb 13 oz. The gears are loud, the motors ar vary strong and way under geared so they are hard to turn by hand and feel grindy. The greas inside sucks, hardly any, i cleaned it out and put in heavy machine greas and it smoothed them out a lot

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought 5 of these for a 26cc yak. The weight vs performance is amazing, and they center really well, and are fast and torqy. replaced a bunch of hitec metal gear servos with them. Took my yak from 9lb 4oz to 8lb 13 oz. The gears are loud, the motors ar vary strong and way under geared so they are hard to turn by hand and feel grindy. The greas inside sucks, hardly any, i cleaned it out and put in heavy machine greas and it smoothed them out a lot

Just bought 2 of these to try out. Only tried bench tests so far.

@ 5.3 volts - a little noisy but not bad for metal gears.

No load - rotating - .4 amp

1kg/cm load - static .4 amp rotating .4 amp

2kg/cm load - static .6 amp rotating .6 amp

5kg.cm load - static .8 amp rotating 1.1amp

No noisier or evident loss of performance under load. All amperages are averages over several cycles. Flight tests next. Very happy with them so far.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just bought 2 of these to try out. Only tried bench tests so far.

@ 5.3 volts - a little noisy but not bad for metal gears.

No load - rotating - .4 amp

1kg/cm load - static .4 amp rotating .4 amp

2kg/cm load - static .6 amp rotating .6 amp

5kg.cm load - static .8 amp rotating 1.1amp

No noisier or evident loss of performance under load. All amperages are averages over several cycles. Flight tests next. Very happy with them so far.

Powerfull, fast, responsive and very strong. I have 4 of these on my Pulse 60 XT. These servos have no problem whipping this 8.5 lb. plane through the air.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Powerfull, fast, responsive and very strong. I have 4 of these on my Pulse 60 XT. These servos have no problem whipping this 8.5 lb. plane through the air.

great servo, ideal for tight tail ends on models. Speed and accuracy excellent, good accessories. ordered two of these and both 'sing' quite audibly during operation, more so than other digital servos i've had from HK. Other than that i'm very happy!! Grab them while they're in stock

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great servo, ideal for tight tail ends on models. Speed and accuracy excellent, good accessories. ordered two of these and both 'sing' quite audibly during operation, more so than other digital servos i've had from HK. Other than that i'm very happy!! Grab them while they're in stock

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save