サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

BMS-A56V高電圧スリムウィング(メタルギア)8.6キロ/ .12sec / 28.4グラム

Generating Links

BMS-A56V高電圧スリムウィング(メタルギア)8.6キロ/ .12sec / 28.4グラム

価格:

Now save 節約 ¥2,658.74 ¥2,658.74

Special Price ¥6,778.66 ¥6,778.66

You save 節約 ¥2,658.74 ¥2,658.74

Was  ¥9,437.40

購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
122000019-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

BMS-A56V高電圧スリムウィング(メタルギア)8.6キロ/ .12sec / 28.4グラム

その超薄翼を持つあなたの好きな1.5+メートルのグライダーのために大きいです。

特徴:
•ダブルボールベアリング(シリコンオイル)
•3極は2S Lipolyに高電圧アップ用のモータの定格をへとへとに疲れました
•最高の熱dissapationのための完全な合金ケース
100%フィッティング正方形のPWSと•デジタル信号設計
•自動措置中央ミリ
•デジタルIC(12bitsの転送データとSOPパッケージ)
•MOS-FETドライバ(威勢のドライバ7Aの電源を介してプッシュすることができ)

仕様:
重量:28.4グラム
寸法:30×10×34.5ミリメートル
7.4V時のトルク:8.6キロ/ cmの
7.4Vでのスピード: 無負荷で0.12秒/ 60°
動作電圧:6.0〜7.4V

*注:
データテーブルに以下に記載の寸法は、底部取り付けタブが含まれています。そのタブには、任意の高さ寸法に6ミリメートルを追加します。

  • Servo トルク(キログラム) (分0.01キロ) 8.60
  • Servo スピード(秒/ 60deg ) 0.12
  • Servo A( MM ) 45.00
  • Servo B ( mm)と 30.00
  • Servo C ( mm)と 41.00
  • Servo D ( mm)と 10.00
  • Servo E ( mm)と 42.00
  • Servo F ( mm)と 24.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

AndrewsBig | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Apr 25, 2016

On bench stres test works OK, but very noisy. When mounted to the wing (1.5m airplane) gets random flaperon in center or end position. I have two and same result. Interesting thing: Flaperon rapidly reduces when i use 6V BEC instead direct 2S Lipo..... Sorry but i cannot recommend it this servos.

stopher | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 14, 2016

Initial take is these are quiet and powerful.. made up a test rig to measure centering accuracy. All have come in at less than 1mm variance using a 250mm long arm. 2 of which i could see no visible variance at all. two others were at around .5 mm. I am using a mm scale so anything less than 1mm is estimated. The test was done with a turnigy servo tester and a 2 cell life pack.

ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

アクセサリー