サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

ブラシレス車の電源システム5000kv / 75A

Generating Links

ブラシレス車の電源システム5000kv / 75A

価格:

Now save 節約 ¥0.00 ¥0.00

¥13,082.09
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
TW-750M
送料無料したい? クリックする こちらへ 詳細情報を参照する

任意の1/8スケールの車、トラック、またはbuggy.Theに最適なブラシレスシステムは、特別に設計されたモーターは、より多くの実行時間を与え、熱protection.Brushlessスピードコントローラー(ESC)が付属しています。

特徴:
スチールハーフメッシュマスクスロットルレスポンス、加速、強力なブレーキとスロットルリニアリティ
調整を行うB6090プログラミングカードを搭載したプログラマブル。
自動的にバッテリパック内のセルの数を検出します。
複数の保護機能:低電圧カットオフ保護、過熱保護、スロットル信号損失保護。

プログラマブル特徴:
逆電力(オフ、低、中、こんにちは)
電源を起動します(標準、低、中、こんにちは)
ドラッグ(ニュートラル)ブレーキ(オフ、低、中、こんにちは)
電池の種類(ニッケル水素、ニッカド、リチウム-XX)
デフォルトでは、手動設定

ESC仕様。
連続電流:7.4V / 75A / 555W
バースト電流:150A
抵抗:0.0166オーム
適当な車:道路上とオフ1月10日。
バッテリー:7.4Vの2cellリポ/ NI-XX
ベック出力:5V / 2A
タイプ:センサレス
外形寸法:29のx 37のx 37ミリメートル
重量:53グラム

モーター仕様。
モーター:540SS 5000kv
タイプ:センサレスブラシレスモータ
最大動作電流:60A
最大動作速度:7.4V / 44400rpm
最大効率80%のBMAX。
外形寸法:36x50
シャフトの長さ:15.5ミリメートル
シャフトサイズ:3.17ミリメートル
重さ:220グラム

内容:
ESC:1×75A
モーター:1×B221C50(5000Kv)
プログラミングカード

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Sep 17, 2010

damn, this IS powerful. I had to set my short course to "dragster profile", ass up an head down, to keep a bit of control when accelerating.

Rikku007 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 16, 2010

excellent brushless system, motor is very smooth and has little resistance when hand turning the shaft, however, once run, it does provide plenty of torque to give wheelies on my desert truck. Esc does not even get warm from running 2S lipo, motor does get warm after 5-10 mins of running with lipo. Programming card is very nice. only complaint is that the phillips screws on the esc are almost stripped and very hard to remove in order to mount the fan, should have used harder steel for the screws, but other than that, great product.

Stewy | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 20, 2010

This setup is for a 1/10th scale not a 1/8th scale. From the dimensions of the motor and the shaft size. For 1/8th scale you want a 5mm shaft not the 3.17mm which will fit a 1/10th scale pinion gear.

ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!