サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

CAP 232バルサ922ミリメートル事前に作成されたプラグ&フライ

Generating Links

CAP 232バルサ922ミリメートル事前に作成されたプラグ&フライ

価格:

Now save 節約 ¥0.00 ¥0.00

¥16,141.89
出荷先:
  • USA
  • Global
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
CAP232-PNP
送料無料したい? クリックする こちらへ 詳細情報を参照する

この華麗なプラグやCAPを飛ぶには、事前に驚くほど速くビルドになってインストールされたすべての電子機器が付属しています。それは非常にスケール感はないために、このモデルは素晴らしい曲技飛行能力がより多く作ります。バルサプラグとフライは、1〜2時間の最大値は、あなたが空気中に取得する必要があるとしているすべてであることをあなたのために行われているあなたが頻繁に参照してください何かので、多くの仕事ではありません。強力なアウトランナーモーター、ESC、すべてのサーボのはtailfeathersに接着し、翼を上にボルトで固定するためにあなたを残して事前に取り付けられています。

我々はテスト済みであり、このCAPを飛んかなり、それは低KVモーターと大きなSFプロップの組み合わせから印象的な推進力と驚くほど可能できました。サーボのは正しい方向に向いて印象的な大規模な制御面を保つための仕事まで以上のもの、それは方向性と堅牢車台のために良いですが、取り外し可能な翼、うまく適用カバーだとモデルが実用的です。あなたがフォームの最大供給されていますが、ISH-小さな構築するのは簡単&非常に有能な曲技飛行モデルをご希望の場合は、この楽しさ、安いCAP 232はちょうどチケットです!

仕様:
翼幅:922ミリメートル
長さ:885ミリメートル
ウイングロード:32gdm2
ウィングエリア:20.9dm2
フライング重量:650グラム
サーボ:9グラム×4
ESC:30A BEC /ワット
モーター:4006ブラシレスアウトランナー900kv
プロップ:11x4.7SF

含まれています:
デカール
説明書

必要なもの:
独自の4チャンネルTX / RX
1300mAh〜2200mAhの3S Lipolyバッテリー

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

David | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 19, 2016

Pros:
Ok built. I recommend it being re-enforced with super glue, as it is pooly glued.
The plane flied great.
Motor is good quality

Cons:
-NO SPARE PARTS AVAILABLE
-Besides the Motor, ALL THE INCLUDED electronics are low quality. ESC WILL burn out on you eventually in mid flight. This happened to me and other people. There are videos of it.

If you decide to buy this, I recommend you replace all the electronics besides the motor, reinforce with more glue, and hope to not crash because there are NO parts available for it.

For this, despite the fact that it flies great, I regret buying this plane. The ESC failure set it on fire in mid air and I lost my $150.0...

jason | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 24, 2016

This plane was a nightmare to build, It could not be considered pnp. All the servos were loose as they were screwed into places where screws can not grip. All the servos were glitchy and needed replacing, even the screws holding them were rusty. The prop nuts were also rusty and all the wiring plus the ESC needed replacing. One push rod was also missing. If I didnt have a large amount of spare parts on hand this plane would never have flown.

Mughees | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Sep 04, 2014

It seems missing pushrods in the pckage is a common problem. I had mine delivered last year. Just finally found time to open the box and assemble this baby. All in all the model seems capable enough. The build quality is good. The servos are nameless and look a bit cheap though. The control surfaces look quite big. I wonder if it can do 3d.
Yesterday i did a ground test. The motor ran for 3 minutes on full throttle with 2s 1800mah battery. I will be getting a 3s 2500mah at least for the maiden flight. That happens after two weeks when I am back home from work.

Gel | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 27, 2014

Very nice plane, but be careful mine has the right COG without the battery, so if I put the battery in battery case, cog is more than 10 mm forward so very nose heavy. I put the battery under the cockpit for a good COG

Gel | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jul 23, 2014

Very nice plane, but it took 2 week to package before it was shipped...
Was missing a pushing rod in mine too.
My first balsa plane, very happy with it. After been assembled, with a 1500 mAh battery, it was very nose heavy (cog 10 mm forward, 79mm from the edge of the wing instead of 89mm). I broke the battery compartiment to put the battery vertically, and then the cog was right. Go vertical very easyly, and had take some hard landing, but stay strong! Yesterday I broke the landing gear sock, but some epoxy and all is like brand new!
A good plane!

Dyami | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 11, 2014

Great overall performance. Great craftsmanship!
Flys amazing regardless of finding the right cg.
Hovers well with a little extra weight on the tail. Remove the tail wight and you have an incredible sport flyer.
Thanks hobby king! A

twoblews | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jan 30, 2014

Bought this plane when on special late last year. Unfortunately it arrived in New Zealand damaged, took photos, scanned HK paperwork and followed HK compalint proceedure, They got matter all sorted form me quickly and very much in my favour. Full marks to their customer service.
Havent flown the plane as keeping as replacement for when my HK Pitts Special falls apart or perishes

NewToHobbyKing | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 19, 2013

Mine arrive a couple of days ago. Thank you Hobby King for double boxing. The outer box had a 12 inch crease on the boxt and if not for double boxing the plane would be a right off. Plane very good but it has a lot of plastic parts. A large plastic cowl. It has a large cockpit window and the plastic goes all the way to the nose.

john | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Nov 28, 2013

Lots of bits missing from mine , only one pushrod , screws missing , and as usual the clevices where rubbish , DO NOT USE THE PLASTIC CLEVICES the little plastic pin snaps off immediately
I havent flew this yet so will not comment on how it flies, not sure how long the motor and esc will last, and the servos are also crap.

Thomas | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 24, 2013

Yust received this plane, everything looks great.
But it is not plug and fly!!!
There is too much to to! It is like other ARF models. Ok, the electronics are included and mounted, but no servo horns, push rods, hinges for elevator and rudder...

  1. 1
  2. 2
  3. 3
  4. 4
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

アクセサリー