Quality Value Overallterrible quality! It came edges split even though there was no damage on the box. Also, it is a very cheap CF or even figure glass. I have had high quality CF tube this size and it was few times stronger and more rigid that this pc!
It will only worth it if you plan to reinforce it with another tube and epoxy AND Only as a short term solution, unless you use it as a control arm feed tube....
Quality Value Overall Quality Value OverallI use this to go over my 3mm push rods to smarten and to avoid flexing in extreme 3d manoeuvres Quality Value Overall Quality Value OverallHelps stop control rods flexing Quality Value OverallCertified Buyer RatedBobo22 Quality Value OverallPerfect carbon tube and great price. Even with the shipping it's still cheaper than the ones sold at my LHS. Quality Value OverallCertified Buyer Rated|TAB| Quality Value Overall4 because the item itself is what it should be, however it was thrown in the bottom of the box, resulting in 6 inches being crushed on the end, it could very well been put on the top or along the side of the package. Quality Value OverallCertified Buyer RatedMoshet Quality Value OverallNo so strong as I expected1 Quality Value OverallCertified Buyer RatedSugna Quality Value OverallThis stuff in AMAZING!!! Use them in every scratchbuild, much stiffer than the fiber glass type. There is however, 2 seams running the length of the tube, hopefully it's not gonna be the weak point of these tubes.
Inner diametre: 2.3mm
Quality Value OverallCertified Buyer Ratedskyfox60 Quality Value OverallWow, thats cheap. Quality is ok, so I can recommend this product. I strenghten my wing of depron flyers with that tube. Quality Value OverallCertified Buyer RatedIceDomin8r Quality Value OverallIts a stiff, hollow, carbon tube for a $1. What more to say, buy lots they come in handy. Quality Value OverallCertified Buyer RatedRal fRotten Quality Value OverallLooks like good rods no thin ends will do the bracing I want Quality Value Overall