- 商品概要
-
コロナDS939HVデジタルメタルギアサーボ2.8キロ/ 0.12sec / 12.5グラムモデル：DS939HV
動作電圧：6.0V / 7.2V
動作電流：200ミリアンペア/ 240ミリアンペア
動作速度：0.13sec.60º/0.12sec.60º
ストールトルク：2.6kg.cm / 2.8kg.cm
サイズ：22.5X11.5X24.6mm（0.88 "x0.45" x0.96 "）
重量：12.5グラム
デッドバンド：≤3uSec
オペレーティング旅行：40°/片側パルス走行400us
ポテンショメータ：2スライダー/ダイレクトドライブ
ボールベアリング：MR85
ギア： メタル
コネクタワイヤ：215ミリメートル
動作温度範囲：-20℃+ 60℃ - Product
Specifications -
追加情報
-
単位:
DS939MG-HV
-
Brand:
Corona
-
重量（g ）
28.00
-
長さ
45.00
-
Width:
30.00
-
高さ:
40.00
-
スピード（秒/ 60deg ）
0.12
-
トルク（キログラム） （分0.01キロ）
2.80
-
Unit Weight (g):
12.5
-
（ MM ）:
31.00
-
B （ mm）と
23.00
-
C （ mm）と
28.00
-
D （ mm）と:
12.00
-
E （ mm）と:
32.00
-
F （ mm）と
19.00
-
単位:
- Community
Discussions -
- Rate&
Review -
Bought 2 of these servos. Both have a wrong thread size of the screw for the horns. No matter how hard I tried the screw went in just a little into the servo shaft and it gets stuck. The horn still moves up and down. Crappy design...I bought 3 of these to use as throttle servos on my nitro helis (using G-Force adapter plates). On the servo tester they work well, smooth and good centering. In the heli, they jitter terribly. They won't play nice with any other servo. They create a huge amount of electrical noise and make the other servos in the heli jitter as well! (Mix of savox/Hitec HV servos running on unregulated 2s lipo). Maybe they'd be ok if you didn't mix them with other servos. And the cases are still made of the same old super-brittle plastic.Best servo yet. I've been using this as my go to servo from slopers to standard class sailplanes for a few years now. Most recently as the servos in all my 2M and 2.5M sailplanes pure and motor on AERF. They are powerful and work awesomely. They are also being used in a current 3M project... they are that reliable. Operating 4.8V to 7.4V(2C LiPo). Yep, I like 'em^)Having seen that these can be used on 2s lipo directly, eliminating a SBEC/UBEC, while using a HV (FrSky 8ch) Rx I bought some to try. They work but seem quite "jerky" on 2s lipo and my Taranis 9D Tx. They work smoothly with a 4pack nimh and servo tester (though presumably with less power) so it'll be interesting to see what happens in a model. Think I'll start with something I don't care too much about.... I can always go back to using nimh or UBEC.Para el precio que tiene muy buena calidadSuper god og billig servo. Momsen skal ned i DK foer vi gaar konkursGreat servo. very well packaged no shipping damage. strong and reliable from what I have been able to see. Nice neat package.Excellent servo. Using 2s lipos for power. I've ordered at least 20 of these servos and all.work great. From slope wings, 2M and my 2.6 ALES. Got 8 more coming... Half yearly sale saves almost $3 each!!!Bought 4 of these, one of theme ha some slop in gears but was usable.
They were quick at 2 celle Life (7,2 Volt) and centered well.
Gone buy more of these.Trs bon petit servo. Fonctionne trs bien, et est plutt rapide et silencieux malgr une utilisation en 5v au lieu des 6-7.2 conseills. Il est aussi assez puissant. Je le conseille. - Upload
Videos - Upload
Files -
Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!
顧客ファイルpicture Corona DS939HV Digital Metal Gea download now [787kb]
