RPM / V：1550kv
7x7.5 7.4V 15.5A 550グラム
KV （ RPM / V ）
最大電流（ A ）
電力（ W ）:
長さB （ mm）の:
最大電圧（ V ）
Unit Weight (g):
抵抗（ MH ）:
This is the second of these motors I picked up, they are a good 3s upgrade for the 750/800mm FMS warbirds (not funfighters)Good motor, i have put these in my 8mm war birds from FMS. Putting on a smaller prop to see if i can get the esc cooler.A quality made, powerful little motor that is a drop in replacement for many of the cheap motors found in the popular EPO 800mm warbirds on the market. Highly recommended.I used this as a replacement motor together with Hobbyking 30amp esc, Turnigy 2200mah 20c 3s lipo and a GWS 9050 prop in my Hype Cessna 182 around 1.3 meters long wing. With a few mods it works really well. Direct fit on the motormount. I just had to file a bit in the foam. Thanks Hobbyking!Excellent motor, hauls butt as a replacement for any of the FMS 800mm Warbirds.
I gave overall 4 Stars, but that's because I never give 5! This motor is top value. Goes like stink and draws little power. For a 500-600g plane on an 8X6 prop or it will move like stink.I am using an APC 9 X 5 folding propeller with the D3128-1550 Brushless Bell Motor. It pulls my Carl Goldberg Gentle Lady straight up with impressive speed. I do consider this an excellent motor. It would be nice if Hobby King carried M3.6 X 25 socket head machine screws to mount this motor. The screws supplied were frustrating to use in tight nose situations.Fantastic item I use it all the time in different applications, copters and planes. Nice shiny finish good feel to hold my hand :PAnother experiment! I cut down a 10x6 folding prop to 6 3/4 dia,
reversed the blades, put it on this motor in my hawksky. I can hear the wings squeaking from stress at full throttle. what a blast!
I LOVE this motor, purchased three more.I upgraded my hawksky trainer with this motor, its funtastic! It will now
climb straight up out of sight! Be sure and match with 30A esc.
Now I can soar slowly or bore holes in the sky. Great motor at a super
reasonable price.Very powerful but needs more QC on the screws that holds the motor to the mount otherwise very nice for the price.