New Items フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

配電、クリーンとダーティとLED照明で400 FPVクアッドコプターをダーツ

配電、クリーンとダーティとLED照明で400 FPVクアッドコプターをダーツ

Discontinued Product

Please continue searching for a similar product.
SKU:
415000010-0
WANT FREE SHIPPING? Click here to find out more!

FUN-RCは、市場上の任意のミニに一致し、まだ楽しい値札を保持する機能が満載ダート400 FPV Hクワッドを、紹介します。

楽しい-RCからダート...シリーズは、カメラとフライトコントローラAを与えるように設計されたフレームは清潔で汚れた振動絶縁システムに付属している..銀行を壊さない、まだいくつかの優れた機能、デザイン、耐久性、優れたルックスをパックし、素敵な滑らかな乗り心地。振動シンブルは、彼らがクラッシュの際に添付し続けるハードウェアを持っています。ダートはまた、A / VとFCのためXT60 / T-コネクタ、統合されたLEDの向きヘッドライトとのAUX出力に直接マウント持つだけでなく、ESCのをマウント配電システムに組み込まれています!フレームは、CNCはきれいなのこの1つはミニが持つことができますインストールすること、フレームを介して配線をルーティングするためのチャネルをカットしました。彼らは、洗練された陽極酸化フレームハードウェア、さらにはモータ取付ハードウェアを含みます。モーターアームはクラッシュ無料損害について太い素敵ながっしりした体格5ミリメートルであり、まだすべての適切な場所に光を作りました。ダーツもFPVとHD用カメラマウントオプションがあり、前方に離れ小道具ビューから取り付けられています。

あなたは競争にダーツを比較すると少ないだけだと思いますが値札です。

特徴:
•クラッシュロックとクリーンや汚れ振動絶縁システム
マウント電源コネクタに建てられ、LEDスポットライトが付いている•配電
•ポリッシュと陽極酸化処理ハードウェア
•クリーン用のワイヤー配線チャネルをインストール
•5mm厚モーターアーム

仕様:
ホイールベース:400ミリメートル
重さ:310グラム

必須:
モーター:〜2216 2212
プロペラ:8時間×週5日
飛行制御:30〜45ミリメートル取付距離
バッテリー:3S 2100〜3200ミリアンペア
5CHラジオ

*注:ハードウェアが写真で表示されませんが含まれています

  • 単位 415000010-0
  • Brand -
  • 容量(mAh ) -
  • 重量 450.0000
  • 長さ 370.00
  • Width 35.00
  • 高さ 90.00
  • Dart 250 400 FPV Quad Frame
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

awesome platform, make sure when using 4s lipos to use a voltage regulator on the leds. 5 min modification required to the pdb tracer between the power and the led.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

awesome platform, make sure when using 4s lipos to use a voltage regulator on the leds. 5 min modification required to the pdb tracer between the power and the led.

I built this frame. In the fitst minute the pcb has burned. I didn't understand. Everything was good. I think the pcb was shorted.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I built this frame. In the fitst minute the pcb has burned. I didn't understand. Everything was good. I think the pcb was shorted.

Just finished my build of the Dart 400 frame. Pretty happy with the quality of the kit, everything fits together nicely and looks well made. At first the kit felt on the heavy side but after finishing the build the total weight was 1200g including a 3300mah 4s and Gopro. Im using the 980kv Sunnysky motors with 8x5inch props on 4s. 30amp ESC and APM flight controller with GPS. To balance everything out i put the batter under the frame and my electronics in the middle and GPS up top. hovers at around 40pcnt stick. I have added a picture to the files section.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just finished my build of the Dart 400 frame. Pretty happy with the quality of the kit, everything fits together nicely and looks well made. At first the kit felt on the heavy side but after finishing the build the total weight was 1200g including a 3300mah 4s and Gopro. Im using the 980kv Sunnysky motors with 8x5inch props on 4s. 30amp ESC and APM flight controller with GPS. To balance everything out i put the batter under the frame and my electronics in the middle and GPS up top. hovers at around 40pcnt stick. I have added a picture to the files section.

The arms delaminated where they meet the motor and broke on a rough landing (not a crash) . Really disappointed with that! Otherwise the quality is good. Finally HK has some spare parts but i want new LONGER arms that arent crap!!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The arms delaminated where they meet the motor and broke on a rough landing (not a crash) . Really disappointed with that! Otherwise the quality is good. Finally HK has some spare parts but i want new LONGER arms that arent crap!!!!

Light weight, goes together easily, I had two screws that had a messed up allen, but it came with enough extra's I didnt need them, flies great, cant wait to put more time on it! Wish there was an option for longer arms, but I did fit 9" props on mine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Light weight, goes together easily, I had two screws that had a messed up allen, but it came with enough extra's I didnt need them, flies great, cant wait to put more time on it! Wish there was an option for longer arms, but I did fit 9" props on mine.

Very good for the price. A bit on the heavy side, however the integrated PCB is very good for making a neat looking quad. Definitely won't take anything larger than 8" props, so use 7" or 8" props with 1100-1200kv motors, and a 2800mah 3S for best use.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good for the price. A bit on the heavy side, however the integrated PCB is very good for making a neat looking quad. Definitely won't take anything larger than 8" props, so use 7" or 8" props with 1100-1200kv motors, and a 2800mah 3S for best use.

I've now built this frame up with ESCs, motors and FC. I'm currently outfitting it with my FPV gear. There's a lot of good things to say about this frame. All parts fit great and are accurate and snug. There are no extra screws or hardware so dont lose any. Frame feels very solid and strong when put together but I wouldnt advise worm burning or wraping it around trees because it's not made for that and will definitly break. But it looks like it will be an excellent FPV/AP machine if cared for. For the money, this will do everything a QAV400 will do and save you a bundle. In case you dont know, this is a clone of the QAV. It even has the top cutout on fwd end for the Luminear gimbal. Haha. I love the rear battery connector and there's lots of room for FPV gear. The few things I dont care for are as follows:

1) The short arms. Limited to 8" props. This forced me to go 4S using my existing motors.

2) Fwd LED burns out in three minutes with a 4S battery (trust me I Know).

3) The CG is going to be tail heavy without a fwd gimble so this forces you to put main battery on the roof and move it forward (like a mini quad). Ive put all possible flight, FPV, and AP gear in the nose and she's still tail heavy with battery down below on rear deck. Oh well. It will simply look like my mini QAV250 which I love.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've now built this frame up with ESCs, motors and FC. I'm currently outfitting it with my FPV gear. There's a lot of good things to say about this frame. All parts fit great and are accurate and snug. There are no extra screws or hardware so dont lose any. Frame feels very solid and strong when put together but I wouldnt advise worm burning or wraping it around trees because it's not made for that and will definitly break. But it looks like it will be an excellent FPV/AP machine if cared for. For the money, this will do everything a QAV400 will do and save you a bundle. In case you dont know, this is a clone of the QAV. It even has the top cutout on fwd end for the Luminear gimbal. Haha. I love the rear battery connector and there's lots of room for FPV gear. The few things I dont care for are as follows:

1) The short arms. Limited to 8" props. This forced me to go 4S using my existing motors.

2) Fwd LED burns out in three minutes with a 4S battery (trust me I Know).

3) The CG is going to be tail heavy without a fwd gimble so this forces you to put main battery on the roof and move it forward (like a mini quad). Ive put all possible flight, FPV, and AP gear in the nose and she's still tail heavy with battery down below on rear deck. Oh well. It will simply look like my mini QAV250 which I love.

Finally HK is giving the competition a run for it's money! What a nice kit for such a budget conscious price. As soon as I saw it released I purchased one along with the Dart 250 and DHL delivered in 3 days. The frame is larger than I expected. All frame plates are 1.5mm minimum thickness, the arms are 5.0mm thick as advertised but one of the arms I got is only 4.90mm. I guess that's the trade off with these clones but i'm not complaining. I like the built in LED light in front and the Battery connector plug in at the rear. Built in PDB is also excellent. Motor mounts will accept 16x19mm bolt pattern so I ordered NTM2826 1200kv motors and a Turnigy Heavy Duty 3000mah 4S 60C lipo. I am going reuse my F20A esc's with simonK for this build. I can't wait to get this all together and fly it. Here's my unboxing review in youtube (copy and paste link) . . http://bit.ly/1tNzlDE

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Finally HK is giving the competition a run for it's money! What a nice kit for such a budget conscious price. As soon as I saw it released I purchased one along with the Dart 250 and DHL delivered in 3 days. The frame is larger than I expected. All frame plates are 1.5mm minimum thickness, the arms are 5.0mm thick as advertised but one of the arms I got is only 4.90mm. I guess that's the trade off with these clones but i'm not complaining. I like the built in LED light in front and the Battery connector plug in at the rear. Built in PDB is also excellent. Motor mounts will accept 16x19mm bolt pattern so I ordered NTM2826 1200kv motors and a Turnigy Heavy Duty 3000mah 4S 60C lipo. I am going reuse my F20A esc's with simonK for this build. I can't wait to get this all together and fly it. Here's my unboxing review in youtube (copy and paste link) . . http://bit.ly/1tNzlDE

Customer files
Battery size Download [137]
No File Name Download [1343]
No File Name Download [1343]
No File Name Download [58]
Dart400 Build Pic Download [3469]
My build Download [746]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save