新規登録

Product Finder

設定

Useful links

 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • Global

DT38の620kv Turnigy視聴者参加型番組の司会者ブラシレスInrunnerモーター

DT38の620kv Turnigy視聴者参加型番組の司会者ブラシレスInrunnerモーター

QTY:

Now save save AU$0.00 AU$0.00

AU$84.25
Stock:
重量:
556 g
SKU:
DT38-620KV

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
商品概要
内部冷却ファンとDT38 Turnigy視聴者参加型番組の司会者、高性能ブラシレスInrunnerモーター。

仕様:
外形寸法:39ミリメートルX 78ミリメートル
重さ:365グラム
KV:620rpm / V
電圧:14.8V〜18.5V(4S〜5秒)
最大電力:1750ワット
最大電流:110A
無負荷電流:1.87Aする@ 8.4Vません
シャフトの直径:5ミリメートル
RI:32.72mOHm
ESC:120A
Product
Specifications

追加情報

  • 単位:
    DT38-620KV
  • Brand:
    Turnigy
  • 重量(g )
    556.00
  • 長さ
    143.00
  • Width:
    50.00
  • 高さ:
    103.00
  • KV ( RPM / V )
    620.00
  • 最大電流( A )
    110.00
  • 電力( W ):
    1750.00
  • 長さB ( mm)の:
    78.00
  • ことができます長さD (ミリメートル)
    72.00
  • 最大電圧( V )
    19.00
  • シャフトA (ミリメートル):
    5.00
  • Unit Weight (g):
    365
  • 直径C (ミリメートル)
    39.00
  • 総丈E (ミリメートル)
    93.00
  • 抵抗( MH ):
    0.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
This is a good motor for the price and performs very well in a 2kg warmliner.
Unlimited vertical climb at good speed with 15x10 carbon folder on 5 cells.
A mix of full and part throttle takes a 2250 mah batt down to storage voltage after a 7 minute flight.
Quality
Value
Overall
Quality
Value
Overall
I have been using this motor for over a year now and it could't perform any better. Using it in FVK Kamalot hotliner with 4s Nanotech and 16 x 13 follder, reaches 1000ft in 9secs. Excelent.
Quality
Value
Overall
Quality
Value
Overall
I got this motor to use in a TT Siren. The motor is a tight fit and required a spacer to fit correctly. You need a prop adaptor with a long shank as the shaft is a bit short.
Ive static tested the mot on a zippy 4S 4000 30C, 14x8 folder, 100Amp Yep speedy = 8670 RPM, 38Amps, 16.5V, 637W after 1min, 884W peak.
Cant try anything else at the moment as this is the largest folding prop I have and I plan to run on 4S 2450 Hacker batteries anyway because they fit the air frame.

Quality
Value
Overall
Quality
Value
Overall
Very nice at any price. Tested on the bench with an Xoar 16x8 wood prop.
3s 38 amps and 382 watt
4s 72 amps and 1090 watt
5s 82 amps and 1425 watt.
This motor is rated at 1750 watt.
Motor runs smooth and cool. Should be fine on a 16x10 static, or maybe 16x12 in the air if used with caution. Very impressed.
Built in fan will allow motor to be run well above 1750 Watt in short bursts.
Red brick 200 amp esc, none opto, corrected manual programs ok.
Quality
Value
Overall
Quality
Value
Overall
I use this motor on a Graupner Speed (eq. Wilco) 1,7m hotliner, AUW about 1,5kg (?). Setup 4s nanotech 2.6, prop 13x8, K-Force 150A opto. Good power, runs very smooth, motor - batt - esc completely cool after flight. 5sec bursts pull up to more than 200m. Will be very fine on 5s (ordering now) and perhaps will even tolerate a bigger prop.
Quality
Value
Overall
Quality
Value
Overall
Would a 60amp esc be ok using 4 cell 2200 or so? I bought the big esc but doesn't fit in my siren.
Quality
Value
Overall
Quality
Value
Overall
This motor is perfect for what it was designed for.
A warm/hotliner. I'm running it in a pacer glider with13x8 carbon folder on
5s. Super smooth super power cool running...

Quality
Value
Overall
Quality
Value
Overall
The point wasn't misconstrued-we just ask that Hobby King make 28mm 5s and 6s motors for our 70mm class jets for additional performance.
Quality
Value
Overall
Quality
Value
Overall
This motor should have been a high KV inrunner with or 5S AND @ 28mm diameter. Alot of guys (like me) are needing 5 and 6S 28mm motors that can fit in the 70mm class jets. Hobby King has too many 7 volts when they should be 5 or 6S instead. Start making then Turnigy and you will get more engine customers.
Quality
Value
Overall
Upload
Videos
  • Hotliner Motor

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

顧客ファイル
No File Name download now [75kb]

Combine

essential items and
acc

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。