Become a Dealer ブログ
新規登録

合計金額

$0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Durafly? -1スカイレイダーワット/フラップ/後退/ライト/ギアのドア1100ミリメートル(PNF)

Generating Links

Durafly? -1スカイレイダーワット/フラップ/後退/ライト/ギアのドア1100ミリメートル(PNF)

 
価格:

Now save 節約 $0.00 $0.00

$143.50
購入済み Discontinued Product

Please continue searching for a similar product.
1 year warranty
SKU:
9142000087
送料無料したい? クリックする こちらへ 詳細情報を参照する

Durafly®™は再び幸せな任意の軍用機の愛好家を維持するのに十分な規模のディテールと機能を備えています。この高品質なA-1スカイレイダーとの標準を設定します。 1100ミリメートルの範囲は、RCパイロットを容易に輸送することができる実用的なサイズのモデルを提供していますし、今人気の2200mAhの3S Lipolyパックを使用して、まだ同時に、モデルが存在感を持ってするのに十分な大きさと、ほとんどの飛行場をしないように対処することができ、それは非常に実用的な作り、少し風に言及。

だけでなく、素晴らしい見て、このスカイレイダーはプラグと飛ぶ、非常に少ない組立作業が必要とされるという意味です。強力なアウトランナーモーター、ESC、航海灯、servolessツイスト&電気後退を回し、ギアドア&サーボはすべてプリインストールされているtailfeathersに接着するあなたを残して、いくつかのスケールディテール、翼プラグイン上のボルトと飛んで行きます!

私たちは、テスト中に広範囲にこの見事なA-1スカイレイダーを飛行していると、それは失望させない、そこに電力の多くが、これらの本当にスケールウォーバードの曲芸飛行のためのものであり、機体は翼端失速のヒントのない悪徳のないです。プリインストールされたフラップサーボがバルーニングと自身が接近速度がwingrockのヒントなしでクロールまで取得できるようにフラップを防ぐために素敵な、ゆっくりと動作を持っています。間違いありません、これは1素晴らしい見てウォーバードであり、それは低翼トレーナーと同じように簡単に飛びます!

特徴:
ウルトラスケールの詳細
高品質の建設完了
プラグ&フライは、単にRXとLipolyを追加(含まれていない)と飛びます!
オプションのミサイルや増槽、モデルの機能追加のクリーンな翼パネル
プリインストールツイストとターンは含まゴムタイヤ&機能的なギアのドアで取り消します
タフEPOフォーム建設
リアリズムのための低速動作サーボの標準装備フラップとバルーニングを防ぐために
プリインストールのナビゲーションライト
簡単かつ迅速に構築

仕様:
翼幅:1100ミリメートル
長さ:865ミリメートル
フライング重量:1100グラム
モーター:3536 750kvブラシレスアウトランナーモーター(GC3536-800)
ESC:35Aワット/ BEC(B-ZTW35ABEC)
サーボ:9グラム×6(PZ15178)
撤回: 電気リトラクト(PZ-15095)
ウィングエリア:19.8dm2
ウイングロード:55.5グラム/ dm 2で

含まれています:
フル写真マニュアル
すべてのハードウェア

必要なもの:
独自の6チャンネルTX / RX
2200mAhの3S Lipolyバッテリー

  • Durafly? A-1 Skyraider w/flaps/retracts/lights/gear doors 1100mm
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

ripcurl777 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 27, 2014

Hmm where should begin.. its my first "expensiver" Plane i ordered from HK (until this, Bixler, Some gliders and so) but the Quality here is amazing!!! The Details, FOam, Retracts, Servos and so on.. evrything is just alomst perfect :) i like this plane! Good Job HK

carl | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 24, 2014

Purchased this product through the International Store. When it arrived it had a large dent in the fuselage. Having waited 4 weeks for its arrival I did not want to return it to Hong Kong and wait another 4 weeks plus. I recommend that if your item is available in your home country then order it from there thus the turn around will be a lot quicker if you have to return it.

Piers | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 08, 2014

i got this a1 for xmas this year along with the axn. delivery was great as usual 2 days with 48hr delivery great service from uk warehouse. upon arrival i found that model double boxed and well protected all parts were there and look great after a short assembly time the worst part being the threading on the screws for the main wing three going in fine the fouth refusing to bite so i made do with three the. first flight was perfect flew great even with all ordanace i kept speed high afraid of stall but it went fine shortly after this i had my first problem the flag servos both of which now refuse to work completely so i replaced them with cheap turnigy ones and been fine since then one day i had problems with the landing gear which broke on a gentle landing on a cricket square it is prone to nose over buy props

Sean | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jan 17, 2014

Excellent plane, looks great, flys well. look up youtube "Durafly A1 Skyraider (1100mm) Performance Demo" for most of what you need to know.

Some things to check:

- Manual doesnt indicate the carbon rod for the elevator...dont forget this!

- Check your centre of gravity. Ours was nose heavy and needed 26 grams in the tail (just use a 35mm nut and bolt and 4x 25mm steel washers does the job if needed)

- Right Aileron press left little meat between the aileron and wing. Needed tape reinforcement.

We hand launch ours due to weeds on grass field. landing is fine.

Excellent model. Really happy with it.

Kten38 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Nov 22, 2013

Quick tip... After I received my a-1 and did an inventory on everything, which was fine, I used my heating iron on low setting and went all over the decals on the plane. Some areas were peeling up, so now everything is sealed and stuck down for good.

Mike | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Nov 04, 2013

Great plane to buy. flies great out of the box no trim required.
only flaws with the plane is the props are extremely stiff and very weak.
be sure to at least buy 3 or 4 extra props. or change out to a stronger 2 blade prop.
also if you want extra power go to a 4 cell 2200mah battery! fits perfect.
landing gear sometimes stick. but other then that the plane is very strong

maverickss40 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 02, 2013

Order this spad at 20 sept 2013 and arrived at 31 okt 2013...good quality

varadero | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Oct 02, 2013

Well, what to say, this is my first Durafly model, and I was a bit skeptical, about everything what you receive for that amount of money.
Well boxed and protected, it was fun to assemble with all nice details.
But my skepticism continued, I was wondering, how stable will it fly with all those bombs and rockets, I thought, that must make some unbalance to the model.
And I was so wrong :)
This model flies so nice and steady, real scale flight, has enough power and agility .... I was actually amazed with maiden . I did not need any trims at all, and landing is so easy with a little bit of flaps deployed. This is the best beginner scale warbird on market.
And in the air it just looks awesome.
Excellent job HobbyKing.

Martijn666 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Sep 23, 2013

This is my first Durafly warbird, and I am really impressed with the quality of the foam. It may not be EPO, but the surface is so smooth, the details are just amazing. Maidened it today with wind at 3-4BFT, the plane flew a bit nervous, but that was mainly turbulence. Had the full ordnance package on the third flight, it slows the plane down just a bit. Flight times with 1/2 and 3/4 throttle is around 7 minutes on a 2200mah 3S pack. Very nice retracts. Flaps are really useful for a nice descent while landing. Short grass or tarmac only due to small wheels. Recommended buy.

hamiltonhlsf | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 18, 2013

Tive que substituir os servos pois, antes de voar j deu poblema.
Mesmo com todos os acessrios voou muito bem.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
顧客ファイル
e with my A-1 Download [82]
No File Name Download [106]
No File Name Download [36]
Wating To Fly Download [104]
Durafly box Download [463]
A1 Manual Download [1085]
A-1 picture Download [85]
No File Name Download [2507]
No File Name Download [2338]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!