サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Durafly™のMe-163コメット950ミリメートル高性能ロケットファイター(未塗装キット版)

Generating Links

Durafly™のMe-163コメット950ミリメートル高性能ロケットファイター(未塗装キット版)

価格:

Now save 節約 ¥0.00 ¥0.00

¥7,884.66
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
9306000188-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

ドイツのMe-163コメットは世界最初で唯一のロケットパワード戦闘機でした。米国の夏時間爆撃に対抗するための迅速な対応インターセプタとして設計され、コメットは先に同盟国が上向きに毎時600マイルの速度と上昇の信じられないほどの割合で保有するものの年でした。コメットの揮発性のロケットシステムは、その後のみ、その致命的な30ミリメートル規範との目標を攻撃するために左の燃料の3分を持っていたから、わずか数分で39000フィートの高度までのMe-163を加速させました。着陸のためのベースに戻ったときに一度燃料のうち、それは戦闘機の攻撃に対して非常に脆弱でグライダーになったと。それは運用面での失敗と見なすことができますが、私-163は、その地面のおかげでデザインを破壊し、ロケットの性能をふくれ第二次世界大戦の真の伝説的な航空機として歴史にダウンしました。

DuraflyのMe-163は、それ自体は本当に画期的なモデルです。だけでなく、このコメットが完全に作業規模「ドリー」スタイルの車台、水疱パフォーマンスと高品質の仕上げを特長としていますが、モデルロケットエンジンを受け入れるように箱から出して設計されていません!そのプラグアンドフライ(PNF)形式では、Duraflyのは950ミリメートル(37.5 ")がプリインストールされ、6chの受信機のお好みにフックアップする準備ができて、すべての電子機器に付属している-163は私にまたがる。最小限の部品点数は、アセンブリが​​ちょうどで完了することができますいくつかの手順を実行。成形EPOは、外部から非常に詳細な表面仕上げを持つ内部炭素強化プラスチック腹スキッドハードマッチした色を備えています。また、バッ​​テリー/キャノピーハッチを介して、優れた冷却外を通って、もちろん、すべての電子機器へのアクセスが良好非常に本物探しスキーム。品質は間違いなく、ゲームの名前です。

経験のあるパイロットのために設計された、速度範囲全体で信じられないほどの飛行性能と安定性からのMe-163のメリット。フルパワー登るアウト、事実上無制限の垂直、巨大なループ、膨れロールと非常に速いパスは簡単にフルスロットルで持っていたされています。私-163は遅く、彼女は同じように安定だとストールのないヒントがありません。推奨2200mAhの30-65C 3Sリポと供給6X4の小道具を使用して、あなたも6分を超えて全体に優れた性能と飛行時間を期待することができます。あなたは軽いセットアップを探しているなら、Duraflyコメットは、特に低速で、1300mah 3sの上に均等に満足しています。

究極のスケールでの経験を探しているあなたのそれらのために、オプションのロケットシステムは、簡単なドロップイン事件(詳しくはマニュアルを参照)で、あなたに他にはないスリルを提供します。作業台車ドロップは、テイクオフの最も規模を考慮して、あなたの送信機のスイッチのフリックで活性化されます。

Duraflyはコメットと次のレベルにEPOのスケールモデルをとっている、と新しいのMe-163とパイロット席にしっかりとあなたを入れています。

特徴:
•スケールと完全に機能ドリースタイルの車台( サーボは含まれています)
•レディは、オプションのロケットモータシステムの低下のために作ら
•事前組み立て、最小限の部品点数のハイレベル
•大規模な炭素強化とタフEPO建設
•スーパー滑らかな表面仕上げ
•安定した高性能空力設計
•電子機器に簡単にアクセスするための大型キャノピー/バッテリーハッチ
•本物の再適用デカールや塗装仕上げ

仕様:
翼幅:950ミリメートル(37.4 ")
長さ:585ミリメートル(23 ')
フライング重量:800〜850グラム(28〜30オンス)

必要なもの:
エレボン/デルタ混合しながら、独自の5-6chのTx / Rxの
1300-2200mAh 11.1V 3Sリポバッテリー(30C分)
ESC:Durafly 40AブラシレスESC
モーター:Durafly 2836 2200kvアウトランナー
プロップ:6x4販売
サーボ:2×メタルギア9グラム(エルロン/エレベーター)1×9グラム舵

任意:
Turnigy受信機制御スイッチ(9107000266から0)
地元のサプライヤーからのC6-0(18ミリメートル)クラスのロケットモーター

注:ボックスのサイズが原因で、より高い輸送コストを回避するために、あなたは他の大部分とは別に、このモデルを注文することをお勧めします。

  • Durafly ME 163 Kit
  • Dr Mad thrust 1.3kW ME163
  • 1.3kW ME163 slow mo pass
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Alexis | 確認済みの購入者

  • Overall
  • Quality
  • Value

Decue comme toujours

May 29, 2017

J'ai acheter cette Komet il y a deux semaine , j'ai commandé le meme moteur que dans la version pnf des servo pignon metal et un esc 45A .

J'ai fait mon centrage par rapport aux CG indiqué dans la notice . Donc premier essai , j'ai du demandé a ce qu'on me la lance car avec le train sa ne decolle pas . On la lance et surprise elle est completement centré arriere ducoup je l'ai atterie sans trop de casse . Si je suis le CG ma Komet etais piqueur .. bizarre ...

Le weekend suivant j'ai ravancé la batterie de presque 3cm , on la lance et elle est toujours completement centré arriere , j'ai mit les gaz a fond pour lui donner de la vitesse et la faire atterir mais le moteur c'est coupé , comme elle etais centré arriere elle c'est freiner , elle est parti en vrille et a fini en morceau sur la piste .

Comme d'habitude peut importe l'avion acheter chez vous le centrage est toujours faux .. Ma Komet m'aura coûté 169€ qui sont parti a la poubelle a cause de vos CG qui sont Faux .

gawest@juno.com | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 29, 2016

This plane is a LOT of fun! Everyone at the field stopped flying to watch, as the rocket ignited and swooshed high into the air. I'm told, by flyers of "real" airplanes, that the wheel-drop is very life-like. You DO have to be aware that, when the rocket is exhausted, there is an ejection charge, meant to free up the parachute of a model rocket, and this blast will blow the canopy off and fill the fuselage with carbon. I stuffed a little fiberglass insulation into the hole before inserting the engine, and this seemed to minimize the damage. But all-in-all, a great plane; well-engineered, beautifully finished, historically accurate, and fun to fly! I lost mine due to receiver failure, but I'm buying the unfinished kit so I can fly it again. Make sure, when inserting the igniter, that your firing switch is off, or it will burn your fingers very badly. Don't ask me how I know this...

lulufr | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 06, 2016

Je suis allé cherché mon colis chez GLS car "pas trouvé l'adresse ! ".

A l'heure du GPS j'ai trouvé ça plutôt grossier !

Le numéro de transport était bidon et c'est une secrétaire qui m'a appelé afin de m'avertir que le colis était arrivé dans son entrepôt.



Le carton est doublé et très compact, en bon état, le fuselage est bien calé dedans sur des supports en mousse et les 2 demie ailes sont scotchés sur le dessus sur un support en carton.

Tous les éléments sont sous plastique et concernant les pièces de l'avion, à peindre...

Une notice de montage couleur en anglais, une planche de décalcomanie type film autocollant, 2 hélices 6x4, un pilote peint, deux tiges carbone, l'accastillage complet pour les commandes, un servo déjà implanté dans le fuselage pour le largage du train.

Il manque : La colle, 2 servos 12g pignons métal (ailerons) et 1de 9g pour la dérive, 1 vario 40/50 Ampères, les douilles de connexion moteur de 3.5mm, la gaine thermo, un connecteur XT60, 1 moteur brushless 2200kv (commandé sur le site chinois doit suivre sous peu), 1 batterie 1300_2200 mah 3S_50C, un switch tout ou rien pour l'allumage de la version moteur fusée (3 secondes) qui donne un bon surplus de puissance et 2 aimants pour maintenir la verrière en place, pour faire décoller l'engin.

Pourquoi ne pas proposer une version blanche équivalente à la version peinte avec sa grande boite de rangement pour éviter de bugner dans le transport vers le terrain ?

Dennis Fox | 確認済みの購入者

  • Overall
  • Quality
  • Value

Durafly ME163 Komet kit editio

Jul 11, 2016

Durafly ME 163 Komet (Kit Edition). A very good quality kit with a low parts count and a very good fit and finish. Its evident great care was taken in the design of this kit. It took dollar store acrylic paint very well (I washed the foam of course). A very happy customer here. I was able to order the correct motor (once in stock) as well and I hope to receive it soon to finish the model. Also I noted the quality of the small bits was so good I did not consider upgrading with Hobby King aftermarket parts necessary. Also the packaging was excellent. No damage at all to the product considering it traveled halfway around the earth. Thank You Durafly and Hobby King.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 08, 2016

fliegt einwandfrei, das Fahrwerk musste ich etwas nacharbeiten

yfl211 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 31, 2016

Really fun this model, very sturdy and easy to put together.
Paint with acrylic paint. You may firstly have to clean it with some household benzin to make the paint stick properly.
Delta set up; reduce the throws about by half, it's a bit nervous. Balances with 3s 1300 mAh and then flies 7 min. Add a velcro to hold the battery. The cg is indicated in the instructions and is spot on. Flies fast or slowly very stable; does all warbird tricks. Easy to land. Nice plane.

septic | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 18, 2016

This unpainted version is great value at its discounted price - less than 23GBP.
I paid the full 45 and still thought it good value.

I specifically wanted the unpainted, non servo, esc, or motor version.

I wanted to try the model as my first PSS slope soarer! and boy what a machine.
I flew it in a 17-20 mph wind on my local coastal slope. Set up as per the manual, no trim changes at all and a pussy cat to land. I had a huge smile on my face and had real fun.

Ral fRotten | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jul 14, 2015

Arrived today quick delivery from NSW W/house, No damaged or twisted parts, everything looks as it should, first impressions are the wings are quite thin and the fuselage quite thick, it looks like it will be fast, the wings have substantial amounts of carbon moulded into them and they should take quite a beating, as with all flying wings It should be great to fly! I'm still deciding on which motor to use I'm thinking Turnigy 2826 2200kv with a apc 6x5.5 prop, it's lighter and can easily handle 350watts, the motor mount looks to be quite thick fibreglass with pre drilled holes, the original motor seems to be underused with only 6x4 props on it, I think it may have been selected to help with the CG, the cabin locating pin is a piece of metal again I think to help with CG, I will report again after it's painted (canary yellow or orange) and flown, looking good Mr HK :-)

顧客ファイル
mine, a bit different Download [2675]
mine, a bit different Download [2675]
Bomb fitted to my well worn ME-163, Grea Download [2638]
standard motor, 7x6 apc prop Download [2643]
finito Download [2675]
C:\Users\Ian\Downloads Download [68]
Schwerpunkteinstellung für NURI´s.jpg Download [121]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!