サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

EDFシャーク850ミリメートル64ミリメートルEDF、EPO(PNF)

Generating Links

EDFシャーク850ミリメートル64ミリメートルEDF、EPO(PNF)

価格:

Now save 節約 ¥0.00 ¥0.00

¥10,387.29
出荷先:
  • Global
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
189000010
送料無料したい? クリックする こちらへ 詳細情報を参照する

チャンスはあなたの好きなRCのウェブサイトの周りトローリングしながら、あなたが飛んでサメを見に期待していなかった、あなたは怪しい何かが起こっていることを考えている場合は、もう一度考えている、これは今、超タフなEPOの作られた古いのお気に入りの新しいバージョンですフォーム!

この楽しいEDFジェットは、64ミリメートルファンユニットを組み立てることは容易である、ESCやサーボのは、すべてがプレインストール、アンダーキャリッジがプラグインされている、腹の土地と巨大なぽっかり口にしたい人のための理想的には、多くの強力なファンが飲み込むことができます空気を、3Sモデルの推力のトンがあることを意味!

厳密には「スケール」が、EDFシャークは素晴らしいパフォーマー、速い、曲技飛行で、楽しいのヒープは、それは少しのお金のための華麗なスポーツ面であるので、あなたは、自分で新しい楽しい飛ぶジェットネッティング空想場合は、何よりもさらに探す必要はありませんここジョーズ、彼は....あまり噛まないでしょう!

特徴:
プラグ・アンド・フライ、ちょうどRXとLipolyを追加
シンプルで高速なビルド
アメージングパフォーマンス
タフEPO発泡建設
使用する一般的な2200mAhの3S Lipoly(含まれていません)
アンダーキャリッジプラグイン
ハードウェアの付属

仕様:
翼幅:850ミリメートル
長さ:1030ミリメートル
フライング重量:700グラム
EDF:39Lブラシレスアウトランナーモーターと64ミリメートル
ESC:25A BEC /ワット
サーボ:9グラム×3

必要なもの:
独自の4チャンネルTX / RX
2200mAhの3S Lipolyバッテリー
発泡安全接着剤

  • EDF Shark Jet
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

chebert | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 12, 2014

The wings and elevator are horrible, I don't see them lasting through one flight much less many, them the control horns are very cheap and will fell, save you money and buy something built better, this is more of a novelty item not a lasting flying plane/shark.

chebert | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 12, 2014

First I find that the wings are very cheap and have a feeling they will fold during a flight, then there is no manual with it to let you know the correct CG, I guess I'll just stick a battery in it and see what happens, the body is one big ball of foam but the tail section and wings have no support and will break very easy.

Berry | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jan 17, 2014

Very good un requin qui vols trs facile utiliser
trs trs bien super ractif trs surprenant

Berry | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jan 13, 2014

Le requin volant et trs facile piloter il va super vite et trs impressionnant en vol
j'ai surpris tout le monde quand je les fais vol
pour moi le seul dfaut c'est la roue arrire on ne peut pas la dirig pour dcoller ou aterir
il vaut mieux le lancer la main

Hughesfani | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 27, 2013

Maiden flight today and my first setup was aileron up/down 10mm, elevator 8mm, c/g 100mm behind the wing leading edge very nice and flying weight 895g (2200mAh 3S lipo plus 63,3g added lead). Flying went very well and it was easy to start with this setup. I will modify this plane for night flying too.

coptor | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 17, 2013

This edf sharks seems to have more than enough power for regular flight and might even do a loop though not a tight one.

First thing to do, I changed out the 25 amp esc and used a 35 amp instead. This should be done if you want the esc to last longer and not quit in flight.

Rear wheel should be reinforced by taping the foam before gluing the rear wheel. Then add a stiff support to the rear of the rear tail fin to prevent it flexing during bad landing.

CG is like everyone said, 11cm from edge but it still feels a bit tail heavy if you're used to slightly nose heavy. It all balances out nicely with 2200ma 3s lipo pushed all the way to the front. Add a lipo buzzer to bring more nose weight too.

During take offs, it tends to pitch up a little, due to huge mouth intake, but once reaching flying speed, it stays level. Good nice floater.

Andrew | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 11, 2013

As review below, no instructions supplied with this model, ok assembly is very easy, however some info on C of G location would cost Hobby King nothing and would certainly help customers. As the previous review, I found the so called 24 hr help next to useless, i contacted them on a separate issue, took a week for an answer and when they did, they suggested an item that was out of stock everywhere.

Jeffrey | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Apr 30, 2013

Well built body and lots of thrust with stock setup but awful electronics!

Neat plane, seemed to be flying well for the first few seconds of it's maiden flight until I lost thrust and had to hard land. I opened the access door and smoke poured out, the ESC was on fire!

I was using a 1800mah 3s LiPo...

mike | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Apr 23, 2013

This plane will not even take off using the stock set up! It is very underpowered. The body is built strong as a tank, but all the fins are flimsy, You will need to upgrade the motor before you will be able to gain enough speed to lift off. Hand launching is about impossible as is. No rudder or steerable tail wheel, no instructions, no cg measurements, the elevator push rods are too short if you mount the control horns in the pre drilled areas. Sloppy waste of money. This plane is a novelty:(

Humanzee | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Apr 17, 2013

minus a crown for the terrible packaging! My shark has a big gouge across the nose from the idiotic cardboard edge it rests against inside the box. Just dumb. As an aside, I ordered some lipos with it, they were just thrown in to bounce around inside; not taped down or anything.

Bah. Not quite bad enough to return it. Just a warning to other buyers!

  1. 1
  2. 2
顧客ファイル
No File Name Download [122]
820684894X300642X9.jpg Download [122]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

アクセサリー