F-15戦闘機ツイン64ミリメートルEDFキット/ワット

• Overall
• Quality
• Value

Customer Rated

Jul 23, 2011

I ordered this plane from the US warehouse two and a half weeks ago and still have not recieved it yet. When i did get in touch with someone they finally gave me a track numb after two more days. Hopefully my plane wont be as slow as the service at HK and oh yea by the wayTHANKS HK LOL!!!!

• Overall
• Quality
• Value

Customer Rated

Jun 19, 2011

Plane arrived in perfect condition from USA warehouse in about a week. Instructions are very lacking, but is an easy build for anyone who has built a foamy jet kit before. Fans need some work to get to balance but they sound good now. Using two 5000kv motors with a 3300mh 30c 3s battery. I had to hog some foam out to get it to fit, but it balances at the 630mm from the nose, which is perfect. The control rods for the elevators have too much flex, carbon fiber rods over them fixed that. The elevators at stock throws are lacking so I increased them to 125pcnt. Plane flies great, not as fast as I would have hoped but still quick enough and a blast to fly, and for the price it is a definite winner.

• Overall
• Quality
• Value

Customer Rated

Jun 11, 2011

I bought this fighter some weeks ago, when it arrived, i was so happy. Today was the first flight and it crashed.
BE AWARED the EDF system that comes is just a rubbish, if you don't want to waste 2 motors and crash the plane buy another (at least) fans. the two fans exploded in the take off breaking the shafts of the motors (NEW MOTORS) and crashed just after.

The plane is ok it brings two Y connector (one short and another long) and it needn't too many mod for installing the electronics.

I'll review again when i receieve another 2 motors and fans

• Overall
• Quality
• Value

Customer Rated

May 06, 2011

Type your review here.

Try to include as much data as possible.

Does this model include the ducted fans units less the motors or do I need to purchase the shrouds & fan blades? Is ther any way to be sure I get the desert tan camo version, what are they shipping now? What are the two you have now?

• Overall
• Quality
• Value

Customer Rated

Apr 29, 2011

So just finished two sorties flew like I knew it would twin power sets rule. pushed it along at half throttle for five minutes puffed one hobby people 2200 lipo (at full Throttle) for one minute, thus the half throttle mention. Rolls are tight with 60dual rates ROG and steering easy as 1,2,3 CG nonfactor its built in put the 2200 in the open space behind the pilot seat over the steering servo flys on perpendicular axis. with dual rates on anyone can handle this stable flyer with docile landing nothing more staisfying than kit building success though I love the convinience of PNF!

• Overall
• Quality
• Value

Customer Rated

Apr 28, 2011

twins fans are awsome next time use 1/8 inch drill for your motors /fan adapters . use two 30 amp esc with a y connector. take about a screamer just about jump off the ground.

• Overall
• Quality
• Value

Customer Rated

Apr 24, 2011

bought the kit and put in the turnigy $6.99 outrunners with 3mm shaft. The instructions only show how to glue the foam together. If you are new this kit is not for you. put in HK 25/30amp ESC and corona 6ch rx. had to buy GWS fans and hubs with grub screws and hex wrench included from the local hobby store Kit come with smaller size shaft hubs. All servos are outside so once you put in the power sets its a breeze to link up. Its a quick build and a beauty to look at!!!

• Overall
• Quality
• Value

Customer Rated

Apr 19, 2011

please , see the link bellow :

Translated Review to english:
http://translate.google.com.br/translate?u=http3A2F2Fwww.e-voo.com2Fforum2Fviewtopic.php3Fp3D99431823994318&sl=pt&tl=en&hl=&ie=UTF-8


The original review is in portuguese.
http://www.e-voo.com/forum/viewtopic.php?p=994318#994318

Well, I will give 5 stras to this plane , because it is very stable, manuverable, easy to build, fly good in low speed, nice plane.
I recomend !

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 19, 2011

That plane is just beautiful. The sound with 2 EDF having 4500kV motors on 4S is amazing. Flying weigh with 2 ESC 45A and 4S 3000 40C is 1kg. CG at 620mm from the nose is perfect With that propulsion config, pulling 90A, it is a bullet! great acceleration and vertical clim! The ones who say that elevator are too small, you just have to configurate mixes with your TX to add elevator input on main wings ailerons (as a flying wing principle)add you will see that this plane is very manoeuvrable. The only problem is the weak and ugly landing gear, but it is light, we cannot have all at the same time. I love that plane :)

• Overall
• Quality
• Value

Customer Rated

Nov 07, 2010

In addition, comes with servo y-connectors so you can save yourself $3.99. I recieved the blue one as displayed. Five blade fans and sturdy landing gear without wobble.