サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

F4Uコルセア1400ミリメートル(PNF)

Generating Links

F4Uコルセア1400ミリメートル(PNF)

価格:

Now save 節約 ¥0.00 ¥0.00

¥38,094.55
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
F4U1400PNP
送料無料したい? クリックする こちらへ 詳細情報を参照する

このコルセアは厳しいEPOフォームから作られている安価な、素敵なサイズのプラグアンドフライモデルであり、それの大きさにもかかわらず、あなたの平均Parkflyerよりも少し大きくなって、このF4-Uは、それは軽量構造だのためにのみ一般的に使用される3Sパックが必要です。

ビーイングプラグアンドフライは、すべてのサーボのは、プリインストールされ、電力は十分に現実的な規模の飛行と基本的なウォーバードスタイルの曲技飛行用の供給ブラシレスモータからあります。このF4-Uは、固定着陸装置を備え、写真マニュアル、すべてのハードウェア、接着剤&ツールが付属しています。プラグアンドフライなので、また、組み立てが非常に迅速であり、唯一の4チャネル無線を必要とします。

このF4-Uコルセアも実用的であるだけでなく安価であるとして、翼は2型PCのプラグであり、アンダーキャリッジ供給は非常に頑丈で、それが破損しなければならないので、特別な交換用小道具を必要としない(標準タイプの小道具を使用しています、標準的な3ブレイダーはまっすぐに収まる)ように簡単にアクセスでき、大型バッテリートレイとがあります。あなたが大金を費やすことなくParkflyモデルよりも少し大きいウォーバードを探しているなら、これはそれです!

仕様:
ウイングスパン:1400ミリメートル
長さ:1150ミリメートル
フライング重量:1350グラム
モーター:4023 850kvブラシレスアウトランナー
ESC:30A BEC /ワット
サーボ:9グラム×4
4チャンネル(モーター、エルロン、エレベーター、ラダー)

必須:
4チャンネルのRX / TX
2200mAhの3S Lipoly

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

melman | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 14, 2014

Beautiful detailed model purchased from Hobby King. BUT Did not fly well. Too under powered. I set up with the standard components and measured 227 WATTS. A warbird of this weight (2.75 lbs) should have at least 100Watts per pound. I wanted to test it with the standard components. Plane got airborn floundered arround and crashed while trying to bring her back down (nose-over). The very thin motor shaft (aprox 2mm) bent and cowel cracked. some abrasion to the foam wing tips.
To make this fly like a warbird I estimate I Need to replace Motor, ESC, Prop (needs much bigger considering 6.5" cowel) and battery to get 350 to 450 watt system after I finish repairs.

Bocki | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 08, 2013

It is for this size and Price a good plane, it is a Lanyu Corsair. Ok, stock it is a Little bit to slow, but with 2 Blade 13x6, 13x6,5 APC or 13x8 it is with stock Motor "scale like" in the Air, but better take a 50A ESC....the 35A cood be burned out!! the paintjob is not very well, some White places or scratches are on the fuselage, but for me no Problem, because i have painted in Red Bull Corsair Design, the blue is darker as stock an made Stickers at myself), good is, that the Stickers are not assambled...

i love this plane, with a Little work it is a good base for Tuning or made a scale Plane....

Es ist eine Lanyu Corsair, fr die gre ist der Preis voll ok. Serie ist sie ein bischen zu langsam, aber mit einer 2 blatt Luftschraube, zb, ABC E 13x6, 6,5 oder gar 8 ist sie mit 3s flott unterwes, "scalemssig, am besten aber einen mind. 50A regler verabuen!". Lackierung, tlw, durchgescheuerte stellen oder leichte Kratzer, war fr mich von haus aus kein Thema, da ich sowieso vor hatte, umzulackieren auf Red Bull design Corsair...

Auf jedenfall eine guten Ausgangbasis zum Umbau oder Aufbau einer stattlichen Corsair!!!

daine | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 29, 2013

got mine today been wanting it for a long time but finally decided to get it. 3 days from the nsw warehouse cant complain with that. the packaging was spot on double boxed as usual. i have a bit of blue paint missing on the fuse but that's not a huge issue, it seems a little weighty for a 3s 2200mah battery much like the L4 grasshopper 1400mm, might try the stock setup before i criticise it too much. i love the look of these birds just hope i can handle the transition from the grasshopper to this one.

Pelican Pete | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 27, 2013

This is fantastic value for money, same as the 1400mm Mustang (see my review) it has the same good and bad points. The only major down side in these Lanyu planes is the lack of provision for installing retracts. To do this, it means having to carve out and modify the wing, but the look is well worth it. This is a great size foamy without all the unnecessary crap like flaps and nav lights. But they do fly better with a 4S battery with a 45amp ESC. I've done all of these mods using HK gear and now it's just a really nice easy plane to fly and if you like WW2 warbirds, it looks great in the air. I just hope Hobby King get some other warbirds in stock in the same size and from the same manufacturer. Very well worth the money.

Stick&Tissue | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 16, 2013

Continued...All up weight without battery is 1700gm. Aerobatics are very scale-like on any prop/battery combo. Flight is very stable in calmer wind conditions and landings are very gentle and easy, much like the 1400mm Cub, although it will float in a stronger headwind. Elevator is not as pitch sensitive as the Dynam 1200mm Spitfire so the flair is quite predictable. Stalls a straight ahead and gentle with not tip stall. Hard to make it spin. HK's T&T retracts are well worth installing but have only 3m legs and I bent mine on the last (hard) landing, but easily bent back into shape. Overall a good package for the $ that WILL fly on even the stock prop/3S combo but has lots of room for experimentation. Recommend upgrading to at least 50amp ESC. So far, best flight results have been on 13x8 prop with 4S pack.

Stick&Tissue | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 16, 2013

This Lanyu 1400mm Corsair is a pretty good cheap alternative to the much more expensive FMS 1430mm Corsair with all the bells and whistles. The quality of the plane is better than expected for the price although there are some issues. The rudder and elevator foam hinges are a bit weak and should be replaced for flight insurance. The hatch (which is huge and provides excellent access) has weak magnets and is prone to come off in flight. I installed HK's twist and turn retracts (PRODUCT ID: HK-5095) which required some carving of the foam and installing hardwood blocks, etc, but worth the effort. The CG does travel back a bit from gear down to gear up but is easily compensated for with trim.
Maiden flights this morning in approx 12-15km/hr wind. All very short duration 2-3 minutes to test various prop/battery combos.
1st flight: (Stock 3 blade prop, 3S pack). Take off is fine and climb out is reasonable but you tend to fly on 100pcnt all the time.
2nd: (Same prop but with 4S pack). Better all round climb and speed by about 20pcnt
3rd: (13x8 2 blade, 3S pack). About same performance as 2nd combo.
4th: (13x8 2 blade, 4S pack). Best yet. Good take off, speed, climb, and power for aerobatics.
5th (14x7 2 blade, 4S pack). Great but maybe asking too much of the motor. Pack was pretty warm on landing.
All in all, the plane flies very nicely but does yaw a hunt a bit in the wind. Aerobatics ve

needmoreglue | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Sep 25, 2012

Love this plane! looks great in the air and flies very nice. Landing gear poped out on the first grass landing but glue fixed that. One servo was jaming on arrival. I have fitted 3 axis eagle tree now the plane can fly in wind and land by itself you just shut the throttle and watch in awe

Foixet | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Sep 06, 2012

Modle trs bon , aprs quelques modifications:moteur d'origine faible remplac par NTM 35/48 900kv 815w,prop 13x6,train d'atterrissage en alu fait maison, charnires drive,batterie 4S 3000,ESC 70A red brick.
beaucoup de puissance et vol super .

Jermy | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 18, 2012

This is my second plane the first being a Parkzone Radian. For the price, it's unbeatable. the structure is very solid with nice plywood bulkheads and reinforcing inserts.

There were a few minore bits missing like a couple of screws. One of the gear mounts was pre-installed backward. I drilled it out to install the gear but it broke duing a hard landing. I've been hand launching it at a rough field and it belly lands gracefully. After some tuneing, it flies and glides very well. Three clevises broke so far. They are too cheap. I crashed it badly breaking various bits including the propeller/motor shaft. The plane is repaired but grounded, waiting for a new motor. One aileron and the tail broke off so I made hinges out of clear duct tape. They move much more freely now. It's funny that it came with several extra servo bellcranks that you won't need and no spare clevises that brake so easily.



Overall, it flies very well and looks very cool.

Renato | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jul 19, 2012

Bom avio, recomendo que ao comprar trocar o ESC por no mnimo de 40A porque o que vem original ridculo corre o risco de queimar no ar de tanto quente que fica.
Falta um trm retrtil para ficar na escala.

  1. 1
  2. 2
顧客ファイル
No File Name Download [286]
No File Name Download [271]
F4U-corsair Download [2385]
F4U-corsair Download [2320]
F4U-corsair Download [2265]
F4U-corsair Download [2317]
F4U-corsair Download [1688]
F4U-corsair Download [2387]
FrSky Taranis Icon Download [1]
FrSky Taranis Icon Download [1]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

アクセサリー