新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • USA

F9FパンサーBYRハンド起動版(PNF)

F9FパンサーBYRハンド起動版(PNF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
3035 g
SKU:
F9F-2-PNP-B

Combine

essential items and
battery
acc
商品概要

グラマンF9Fパンサーは、それが空気のエンゲージメントに空気中のヤク9を撃墜時に韓国を超えるskys米Navys初勝利を勝ち取ることの区別を持っていました。初飛行は1947年11月に行われていると、第二次世界大戦の終わりに開発された、この見栄えの航空機は、新しい後退翼の設計に置き換えされる前に、長い間、フロントラインサービスではなかった、と予備隊で、主にそのキャリアを終えました。航空用語ではこの短いキャリアにもかかわらず、パンサーは多くのファンを持っています。

これは非常に非常に多くのEPOのモデルを探してスケールパンサーの正義を行い、それらの巨大なカラフルな羽タンクと空に素晴らしい見えます。非常に強力な合金EDFユニットは、推力の多くを供給し、幻想的、性能があっても、垂直たっぷりの3Sに素晴らしいです鳴ります。取り付けプレートをプレ取り付けられているとして、あなたがそう望むなら手で打ち上げバージョンであることは、あなたに後退するためのオプションを提供します。 RXに4.8Vまたは6V出力のオプションが用意されています完全にプログラム可能なESCとUBECがあるように、すべての高トルクのサーボは、あらかじめ取り付けられています。

これは、ビルドの観点からあなたの平均プラグNフライよりも少し複雑です品質のスケールモデルですが、RCのパイロットのための報酬は、70ミリメートルのクラスで最高の飛行&探して泡モデルの一つです。

仕様:
翼幅:1050ミリメートル
長さ: 千ミリメートル
フライング重量:1000年〜1100グラム
EDF:2848ブラシレスinrunnerの4370kv(3S上の静推力- 1150グラム〜1200グラム)との合金68ミリメートル
ESC:60A OPTO
UBEC:3A〜5A
サーボ:4×9グラム高トルク

含まれています:
すべてのハードウェア
説明書
総合デカールシート

必要なもの:
独自の4チャンネルTX / RX
並列無しの3700mAh 3S〜5000mAに3S Lipolyバッテリー

Product
Specifications

追加情報

  • 単位:
    F9F-2-PNP-B
  • Brand:
    N/A
  • 重量(g )
    3035.00
  • 長さ
    960.00
  • Width:
    290.00
  • 高さ:
    290.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Came very well wraped, go's together fast for a kit, foam is first class but had a couple of blisters in the paint, used epoxy to glue it but be warned sand the paint before glueing, decals are nice and are on three sheets good manual with C of G. The wing is glued on so if you wont to fit retracks do it before fixing the wing though ply plates are pre fitted and servoless retracks would be easy to fit at any time. waiting for weather to maiden her it really likes the part.

I hope she flys as good as she looks
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Its a realy nice model. I changed the engine and esc with a rclander 68mm, 1.7 kg thrust and 80 amp esc. I modified it with flaps and dsr b retracts. Had to do some cutting to make it fit but it was worth it. I also put on the turnigy rc led lightning system. I use a 4 cell 4500 mah battery and a separate receiver battery. (2 cell 850 mah. life battery, 48 gram). Tot weight is 1.750 kg and flying time with different power setting is 12min.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Not a bad foamy EDF, it has a nice shiny painted finish with minimal moulding dots and lines, it can be seen that these have been avoided where possible and it looks neat. Its not smooth smooth, but its not bad for a painted foam finish.

Instructions are OK, limited though, and show assembly steps which on my model have already been completed. This did not save time at all as the assembly was pretty shoddy, parts did not fit, control surfaces were not aligned and there was a significant amount of excess glue in the hinges preventing movement. After a couple hours trimming with the dremel, I have managed to get it to work. Also note that the "perfect fit" DSRB retracts are no where near a perfect fit, and require cutting and gluing in blocks for the retracts.

I will be running 2x 3S 2150 batteries which need to be jammed all the way in the nose (past the battery tray) to get it to balance. EDF does run smooth on mine though, and will produce around 0.8-0.9:1 thrust with the retracts, and top 1-1.1:1 without the retracts.

Overall, a great looking model, great finish on the foam with sharp trailing edges on the wing (looks great). Might paint the surfaces a bit to help distinguish top and bottom.

Would I buy it again? so far I'm pretty impressed by the foam model, but let down by the poor assembly. With some work that I'm prepared to put in, at this price point, I think I
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The model is ok but the retracts that are supposed to be an exact fit do no fit without triming wood at mounts and also nos has to modified to accept nose wheel electric retract. this was the TGY-DSRB retracts.

As for weight and balance try putting fiberglass in the nose to strengthen it and the balance will be fine. This has to be done before glueing it on. Tha plane is slower with the electric retracts and a better motor would be good.

Charles
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Finally got it balanced. After a burnt out motor and splitting it in half twice. The alloy EDF needs a 4000mah batt up front to get the CG forward enough. Flys steady and has huge presence in the air. Sounds a million bucks and fan is smooooooth. Not really for beginners and even then I'd only take it out for special occasions. Enjoy.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
battery
acc

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。