新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録

グラスファイバーコンポジットYAK54 0.46 3Dキット

グラスファイバーコンポジットYAK54 0.46 3Dキット

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
4377 g
SKU:
YAK-542C46
商品概要

この3D YAK54複合面は本当に素晴らしい、素晴らしいです!
完全に成形された機体は、これは単独でバルサでは達成できない、平面偉大な形や形だけでなく、ある光を与えます。 YAK54は美しく塗られ、合金の着陸装置、テールホイールとホイールスパッツを含んでいます。

もともと0.46グローエンジン用に設計された、YAK54は、変更とバッテリーハッチのようなキャノピーを使用せずに同様の電気系を取ることができます。

この素晴らしい3D面に適したモータは、当社のG46-670または同様の寸法を有する任意のアウトランナーであろう。

スペック。
翼幅:1330ミリメートル(52.3in)
ウィングエリア:32SsqDm
長さ:1160ミリメートル(45.6in)
フライング重量:2700〜2800グラム
素材:ヒューズ:グラスファイバー、ウイング:プライ/バルサ/映画
ランディングギア:合金

グローセットアップ
ラジオ:あなた自身のTX&RX
サーボ:5×標準サーボ
エンジン:0.40 0.46 2ストロークまたは0.52 4ストロークグローエンジンに
バッテリー:RXバッテリー

EPのセットアップ
ラジオ:あなた自身のTX&RX
サーボ:4×標準サーボ
モーター:Turnigy G46-670
ESC:60A
バッテリー:4秒​​〜5秒4500〜5000mAに20cのバッテリー

Product
Specifications

追加情報

  • 単位:
    YAK-542C46
  • Brand:
    N/A
  • 容量(mAh )
    いいえ
  • 重量(g )
    4377.00
  • 長さ:
    885.00
  • Width:
    235.00
  • 高さ
    390.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Es necesario reforzar la cola, ya que he visto como se partia en dos modelos, es necesario colocar una tira de fibra de carbono y unos tirantes hasta el timon, tambien viene bien reforzar con un poco de fibra la base donde atornilla el tren de aterrizaje, es muy debil y al minimo aterrizaje un poco brusco, se parte el fuselaje.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
precisa de mais de 200gramas na frente uma merda o projeto voa mal igual ao decathlon
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Not the best paint job in the world, Mine if you look close it has lots of paint cracks and it's never been flown. It's almost like the paint isn't flexable enough for the fiberglass, I'm wondering what it's going to look like in a couple months.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
today made its maiden flight.i put the 15cc gas engine from hobby king.standar metal gear servo hobby king.1 pack 4.8v nimh for reciver and a 7,4 v 2200 mah with bec 5v for the ignition. the plane needs another 350 grams weight forward. In air was very stable at slow speed.in 3d just perfect. The landing was very easy.
very good plane. I strongly recommend you
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I got mine today everything were well packed, cant wait till i start buliding this babe, i have a 9cc gasser i will put in this coming weekend. I hope it flys well

Good job hobbyking. Keep up the good work
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Running ASP52 2stroke and 12X6 prop, underpowered will change to a 11X6 prop to try and get the revs up.



I had the rear stabilizer break on both sides of the fuselage, the balsa frame where the elevator hinges glue to tore apart on one side and the 2 main balsa stick frames on the other side of the plane snapped 5 minutes into the maiden flight.



I added approx 100g of lead to front of the plane to get CG 85mm back from LE, this balanced perfect. The plane has a good roll rate and flys great can easily pull the power off and glide in for landing.



Quality of the overall plane is very good (apart from the rear stabiliser being too weak).



Will post some build pics soon.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi Mr.Mach1 ..



its approximately about $115.91 by EMS Express..



AND, $36.13 by Air Parcel ..



actually you can know any shipping cost by try to buy it , but dont confirm it ..



i hope i help you ..



Best Regards



verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got mine today nicely made and good quality. Waiting for a good day to fly it, just nearly finished building it, using a O.S .46 with a Turngy 11/7 wooden prop
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi , I bought this one and found the bulid quality excelent , although I changed the wheels (the original were too small) I found the CG to be spot on but I had to load over 200 grams of lead in the cowling (nose)and Im using 5c 5,000 mah turnigy akku to get the balance right , The First flight was super although the hohen ruder was a bit severe
you need a long long airfield for this one and DONT try to land it slowly because of the weight it falls like a wet sack of cement .I used the G 46 motor and it performed suoer . Fazit. Super build, a bit on the heavy side and stricty not for beginners way too fast , in the air flys very direckt ...have fun ..
PB
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a very nic RC control model. Very quality.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。