The FTM302 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a single antenna, a bidirectional transmission system in a compact design with support for multiple signal inputs. Supports external power and is compatible with standard JR-type module bays.

The FTM302 offers a long range of up to 3.5km + on the EU default setting of 20dBm (changeable through the management system), low latency, less than 10ms, and allows for online updates and managing the module via the FLYSKY Remote Control Assistant. Power to the module can either be internal or an external power source of 5~28V via the built-in XT30 connector. The module also has a built-in fan which automatically turns on if the temperature reaches 45°C to ensure the system remains safe, this can happen when the module is being used with higher voltages.

High-gain RF components, coupled with the 2.4GHz AFHDS 3 protocol, enable the module to cut through interference easily while maintaining high transmission rates, especially when compared to 900MHz counterparts. The FRM302 uses FLYSKY's latest generation of intelligent wireless protocol (AFHDS 3) to achieve higher sensitivity and higher gain. It achieves high-speed data transmission and low latency of 10ms in UART mode. This gives a precise response in weak signal conditions and active evasion of co-channel interference, especially when being used at extreme ranges and areas with multiple obstacles.

The FRM302 supports PPM and UART serial communication modes with failsafe, settings can be changed at the touch of a button, and the antenna can be replaced for customized applications. The FRM302 module is compatible with FTr16, FTr10, and all other AFHDS 3 receivers. So with regular online updates via the RC assistant, a wide range of the latest technology features, and FLYSKY's attention to quality and detail, this is a must for all FPV/UAV and drone pilots.

Features:
• Long range 2.4GHz module, has a range of 3.5km and more depending on settings
• Bidirectional transmission system which supports multiple signal inputs
• AFHDS 3 protocol achieves higher sensitivity and higher gain
• Settings and updates are done online
• Compatible with standard JR module bays
• High-speed data transmission and a low latency of 10ms in UART mode
• High gain RF components easily cut through interference

Specs:
Type: FLYSKY FRM302 2.4GHz AFHDS 3 Long Range Transmitter Module
Frequency: 2.4GHz
Protocol: AFHDS 3
Transmission Power: 20dBm EU, 33dBm FCC (requires external power)
Range: 3.5km (EU), 50km (FCC)
Delay (Latency): 10ms (UART mode)
Data Port: PPM/UART
Antenna Type: External single antenna
Power Input: 5~28V
Updates: Available online
Operating Temperature: -15°C~+60°C
Humidity: 20%~95%
Dimensions: 64.2x48.5x33mm
Weight: 73.3g
Certification: CE, FCC ID: N4ZFRM30200

Note: A copy of the instruction manual and specs is available under the "Files" tab.