New Items フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

折りたたみプロペラW /合金ハブ35ミリメートル/ 3.17ミリメートルシャフト7x4(1個)

折りたたみプロペラW /合金ハブ35ミリメートル/ 3.17ミリメートルシャフト7x4(1個)

Shipped From:
  • Global
QTY:

Now save save AU$0.00 AU$0.00

AU$7.87
ステータス:
在庫あり
重量:
49 g
SKU:
FP35-7x4-3.2
WANT FREE SHIPPING? Click here to find out more!

プロペラワット/合金ハブを折りたたみ
機械加工合金ハブ。

  • 単位 FP35-7x4-3.2
  • Brand HobbyKing
  • 重量(g ) 49.00
  • 長さ 80.00
  • Width 38.00
  • 高さ 74.00
  • 直径X (インチ) 7.00
  • ピッチY (インチ) 4.00
  • 回転 CCW
  • ブレード数 -
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Nicely machined and well balanced right out of the package. A fraction of the price of similar units at your local hobby shop. Highly recommended.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nicely machined and well balanced right out of the package. A fraction of the price of similar units at your local hobby shop. Highly recommended.

Received this folding prop today and installed it on a D2826-10 1400kv Brushless HK Motor. At first, I thought I had received the wrong washers to install on each side of the prop blade hub. Turns out, you have to put a bit of pressure to get the second washer in - providing a tight fit. As mentioned on another post, there is only one small nut to hold the blade assembly - a bit scary! I added a lock washer, then a flat washer and then the nut. Thread lock liquid was applied liberally to the bolt to make sure this holds well. I also applied thread lock on the larger nut holding the hub to the motor shaft - better safe than sorry. I haven't tried the motor spinning but I'll post results of this later. I am a bit concerned that the blades are very tight and will not fold properly. Time will tell if this is a good alternative to the all plastic APC folding prop system.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received this folding prop today and installed it on a D2826-10 1400kv Brushless HK Motor. At first, I thought I had received the wrong washers to install on each side of the prop blade hub. Turns out, you have to put a bit of pressure to get the second washer in - providing a tight fit. As mentioned on another post, there is only one small nut to hold the blade assembly - a bit scary! I added a lock washer, then a flat washer and then the nut. Thread lock liquid was applied liberally to the bolt to make sure this holds well. I also applied thread lock on the larger nut holding the hub to the motor shaft - better safe than sorry. I haven't tried the motor spinning but I'll post results of this later. I am a bit concerned that the blades are very tight and will not fold properly. Time will tell if this is a good alternative to the all plastic APC folding prop system.

looks ok for smaller motors but came with wrong screws so will have to drill out to make it work looks like there 3mm bore on the prop and the screw looks like maybe 2.5mm shaft, its less than 3mm
i was going to use on a ntm 1800kv 2836

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

looks ok for smaller motors but came with wrong screws so will have to drill out to make it work looks like there 3mm bore on the prop and the screw looks like maybe 2.5mm shaft, its less than 3mm
i was going to use on a ntm 1800kv 2836

Got it today, missing one screw for the top conic and holes for blades mount is 2 mm diameter then the screws are 3 mm diameter.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got it today, missing one screw for the top conic and holes for blades mount is 2 mm diameter then the screws are 3 mm diameter.

I just received this item. The prop screws do not fit thru the holes in the spinner. One prop screw had double the threads of the other. Now I just have a shiny piece of scrap metal.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just received this item. The prop screws do not fit thru the holes in the spinner. One prop screw had double the threads of the other. Now I just have a shiny piece of scrap metal.

This product is DANGEROUS ! the blade retention nuts have no thread locking or lock nut. The probability that a nut will vibrate loose and a ade gets thrown is too high for my comfort. I wont be using this prop. Another waste of money

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This product is DANGEROUS ! the blade retention nuts have no thread locking or lock nut. The probability that a nut will vibrate loose and a ade gets thrown is too high for my comfort. I wont be using this prop. Another waste of money

good product for that price :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good product for that price :)

exelente acople recomendado

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

exelente acople recomendado

nice propeller use with 2826 motor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice propeller use with 2826 motor

Just bought it to fill up the mail space of another item, but the original item is still on backorder. This prop looks good.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just bought it to fill up the mail space of another item, but the original item is still on backorder. This prop looks good.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!