Become a Dealer ブログ
新規登録

合計金額

$0.00

ショッピングカート 0 ショッピングカート 0 Loading...

フルニエRF-5バルサ電気スケールグライダー1550ミリメートル(ARF)

Generating Links

フルニエRF-5バルサ電気スケールグライダー1550ミリメートル(ARF)

 
価格:

Now save 節約 $0.00 $0.00

$77.70
購入済み Discontinued Product

Please continue searching for a similar product.
1 year warranty
SKU:
110000003
送料無料したい? クリックする こちらへ 詳細情報を参照する

この見栄えフルニエは、ARFを飛んでいるリラックス日間だけのチケットです、このスケールスポーツグライダーは迅速な時間で空中にすることができます!

機体がうまくバルサから構築した後、巧妙に覆われている、このフルニエは、空気中のベンチとより多くの時間に短い時間で結果の事前組み立ての高いレベルを提供しています!

このモデルは非常に実用的ですだけでなく、簡単な輸送のための取り外し可能な翼を備え、それはまた、簡単にバッテリーへのアクセスのための巨大な磁気天蓋を持っている、また、オプションの4輪車台、しかしフルニエは同じように簡単に手で起動することができますされて含まれ、腹が上陸長い草から飛んでそれらのため。

このスケール探してモーターグライダーの大きな翼幅は、スロットルのっぽさを軽く流し、それを開いて、印象的な登りアウトと偶数奇数ループのための電力が十分に存在することができることを意味します!フルニエは速いだけバルサプレーンが提供できるビルド、飛行性能と耐久性の種類に実用的な規模のグライダーとすべての偉大な価格であります!

特徴:
高速ビルド時間
様々な表面をオフに流すことができます
操縦可能なテールホイール
一般的な2200mAhの3S Lipolyバッテリーを受け入れることができます(付属していません)
巧妙に事前カバード
アンダーキャリッジ品質ピアノ線

含まれています:
ユーザーマニュアルCD-ROM
すべての必要なハードウェア

仕様:
翼幅:1550ミリメートル
長さ:850ミリメートル
フライング重量:700グラム

必要なもの:
独自の4チャンネル送信機と受信機
4×9グラムサーボ
30AブラシレスESC
28ミリメートル1200KVブラシレスモータ
10インチのプロペラ
1800mAhの〜2200mAhの3S Lipolyバッテリー

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

steven | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Nov 25, 2013

beautifull kit. very well done. reminds me of a slick with U-2 wings. instructions are on a CD, not printed, and anyone with any building experience can put this together easily.the slots in the wings for the outboard wheels are hard to find at first but, once you find them they are easy to see. they are centered 35mm back from the leading edge, and 270mm in from the wing tips on the under side of the wing.

the most confusion that i could see was the lack of the metal rod (not included in the kit) to tie the two elevator halves together, and no where in the instructions to place it through the fuselage before gluing in the elevator. i made mine from a piece of 2mm push-rod and drilled into the elevator flaps before setting the CA hinges.

i installed a turnigy 2217-16 turn 2050kv SKU: TR2217/16 motor, (what a hog!) mounted in perfectly with no mods, a 10x6 APCE prop, a 40 amp ESC, and a 2200 ma 30C 3s battery. all up ready to fly weighs 925 grams, pulls 21 amps WOT on my meter, and has a 1.1 to 1 power to weight ratio. it should fly vertical straight out of sight like a homesick angel, but float home like a snowflake.

again, awesome quality kit! nothing like my dragonfly that i had to get out the sealing iron and re do all of the edges of the covering that was coming loose

Mikesheldon | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jul 27, 2013

The instructions on the CD are just about useless.But this is an easy model to put together.Don't forget to put the elevator joiner in first,and you'll have to make one because its not supplied.I bought one of the recommended motors,and if you do the same you will have to extend the mount by at least 10-12 mm,even using the packing supplied.There is no indication of where the CG is located,so I have gone for slightly forward of 30pcnt wing chord,and will adjust after flying.30 amp ESC,and 2200 30c battery fit nicely,and a 10x5 prop gives plenty of power pulling about 20 amps.Waiting for some decent weather so I can give it a try.

顧客ファイル
Manual Download [7630]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!