サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

フォックスEPOグライダー2320ミリメートル(PNF)

Generating Links

フォックスEPOグライダー2320ミリメートル(PNF)

価格:

Now save 節約 ¥0.00 ¥0.00

¥18,632.11
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
FOXGLIDER
送料無料したい? クリックする こちらへ 詳細情報を参照する
新しいフォックスEPOはそれは美しいと同じくらい大きいです!
あなたは即座に大型電池の巨大な様々なキャビンサイズ、ラジオ・ギアと、おそらくFPVシステムに気づくでしょう。言葉だけで主翼にEPOフォームから作られ、2(モールド時に挿入された)炭素繊維ロッド、合金建具を含め、この2.32メートル翼幅モデルは、飛行中の剛性やクラッシュで寛容です。巧み念頭に置いてシンプルさで設計された、フォックスグライダーは、スナップロックキャノピー、ゼロドラッグを提供する内部ホーンシステムとすっきり外観などの機能が含まれ、加えて慎重に設計されたフォームの製造金型は醜い蒸気から無料で滑らかで、主に平面の肌を保ちます他のモデルで見つかった銃スポット。キツネを構築することが唯一のプラスヘッドスクリュードライバーを必要とする15分間の処理です。単にテールピースにネジ、バッテリーであなたのRx、プラグを接続して、あなたは準備が整いました!

仕様;
ウイングスパン:2320ミリメートル
長さ:1290ミリメートル
フライング重量:1150グラム
電源システム:750kvブラシレスモーター
ESC:30A(ブレーキ付)
ラジオ:4チャンネル、4サーボ制御されます。

含まれています。
フォックスグライダー
すべてのサーボがプリインストール
モータープリインストール
ESCプリインストール
追加製作や建物は必要ありません。

必須;
レシーバ/トランスミッタ4Chの
2200mAhの3S Lipoly。 (より大きな電池は動作しますが、CGに影響を与える可能性があります)

注意;

これは、大規模なモデルとelswhere販売STモデルのバージョンと同じではありません。これは、はるかに大きいです。
* V2バージョンの機能はエルロンサーボの位置を改善しました。
  • Fox EPO Glider 2320mm
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

efplc | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 24, 2014

It flys like a dream for an epo glider.
Motor is normal for soft wind.
change the elevator servo with a metal.
C of G not 4cm byt 6 cm or lighter bat.
first flight without trims.

Firewurx | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Apr 02, 2014

Easy plane to fly! It can fly really slow so landing isnt a problem. I crashed mine today (sort of) and it was still fully intact, so its a tough plane.

I think the elevator can use a bit more travel. I use the ailerons as full capacity. The rudder is pretty big and thus very effective.

I flew it today in 10-15 kts wind, in this wind its lands nearly vertical.

So conclusion: Good sturdy plane, easy to fly.

foxauthor | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 17, 2014

I have found this to be an excellent flying glider despite a few issues that some have mentioned. The foam hinges do not last more than 4-5 f;lights before breaking off, the aircraft is slightly under powered, and it really should be factory equipped with flaps. It loves ot fly, but hates to come back down with just flaperons. I nylon pin hinged all surfaces, made balsa ailerons and flaps, econokoted the entire aircraft for strength, and bolted the wings through the canopy. The large wings tend to slip on the spar during flight and especially on landing and need a better way to secure them from slipping. Finally, I made servo protectors for the ailerons servo's as they tend to hit the ground occasionally on landing and snap servo gears. Overall, this plane is an great flyer at a great price and certainly draws attention at the field. Especially when lit rolls by on landing and keeps going.

Dries | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 10, 2014

Maidened it last weekend, had in total 4 flights. Very very nice plane, I flew it with a 3S 2200 mAh. Descents quite quickly for a glider (should go with a lighter battery I guess) but is a very fine plane to fly powered. Very relaxing. A joy to land too :-)

I removed all the stock clevis, horns etc from the kit as they are poor quality. Replaced it by decent hardware though.

Norbert1 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jan 14, 2014

Habe mit den Fox fr zwischendurch hinter dem Haus zum fliegen geholt. Ist wohl mein 12 oder 14 Segler. Das meiste VollGFK/CFK. Ich bin berrascht, wie gut der FOX gleitet, nicht bermassig langsam, aber sehr guter gleitwinkel. Der Motor reicht fr 45 Grad steigen und Regler arbeitet klaglos mit SBEC. Betreibe ihn mit 2200mA/20C/3S Turnigy. Damit stimmt auch der Schwerpunkt. Knnte noch etwas weiter hinten sein, aber der Akku ist am ANschlag. Flugbild ist wirklich toll und man sieht in aufgrund des grossen Rumpfes gut. Nach Abschwung um 50 mtr fehlen hinterher 25 mtr, aber naja bei dem Preis. Die flchen sindzum normalen fliegen ausreichend steif und die Oberflche sehr gut. Meine nderungen: Alle Ruder abgetrennt und mit faserverstrktem Klebeband neu gemacht, da zu schwergngig. Flchen vom Rumpf bis zur Hlfte oben und unten diagonal mit Fasertape im Abstand von 20cm getapted, da nicht verwindungssteif genug. Und habe mir noch Flaps eingebaut, um mit Krhenstellung landen zu knnen. Ansonstem das originalmaterial verwendet.

ALBERT | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jan 03, 2014

hi i got this glider from hk a few weeks ago. great glider for the price and flies very well. i have fitted 2 wooden dowels through the fuselage into the wing roots for added security. like the secure canopy fixing.

Nriquitor | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Dec 06, 2013

Calidad. Precio
Muy buena, es muy noble en vuelo
Los aterrizas es los quiere con velocidad porque si no se cuelga y cae bastante rpido.
Materiales decentes.
El motor es justo para volar.
Y hacer algunas trepadas.
Por lo dems me gusto muchsimo su diseo y vuelo.

JFrancis | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 22, 2013

Excellent glider! Build was complete in under 1.5 hours and centre of gravity was perfect with a 2200 3S in the battery space. Flew very well during first flight with only minor trimming required, has plenty of power on 3S for 35-45 degree climb

Michael | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Oct 12, 2013

(Continued) cg of 40mm. The Fox flies well and looks great in the air. Quite frankly at this price what's not to like!

Michael | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Oct 12, 2013

Received my Fox in August 2013. It has the tail mounted servo for the rudder and blue pilot with the cap, so not the version currently pictured on the product page. HobbyKing should do themselves a favour and update the product page images as the latest version is much better than the one pictured on the product page.
Mine had no shipping damage and I had no issues with the motor mount reported in some reviews.
I cut out all control surfaces and hinged them as even working them back and forward for a couple of hours didn't free them up enough and this would stress the servos. I also cut in flaps so that I could setup crow for landing and full span ailerons for increased manoeuvrability. At the moment I haven't set this up but have found that flaps on their own slow the Fox down well for landing.
I also changed the servos to HobbyKing 939MG's as I had some lying around and some owners have reported servo blowback during high speed aerobatics. I also added a 40A Plush ESC, again because I had a spare one.
The only assembly issue I had was that I found it hard to get the two horizontal stabiliser bolts secured as they appeared to be a little too short. Got there in the end though. I'm using 1300mAh Nanotech 45 C batteries and have added 40 grms of lead to the tail to balance her. My cg is now sitting at 63 mm from the leading edge, quite a way back from the recommended c

顧客ファイル
No File Name Download [83]
Fox On The Run 4 Download [26]
Fox on The Run 3 Download [29]
Fox On The Run 2 Download [29]
Fox On The Run Download [23]
Fox modification Download [185]
Stock power draw Download [145]
hk-fms-fox-glider-v2-manual Download [9012]
Ruderhorn Download [37]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!