サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Naze32 / F3のためのOSD BECとFPVレーシングドローンPDB

Generating Links

Naze32 / F3のためのOSD BECとFPVレーシングドローンPDB

価格:

Now save 節約 ¥0.00 ¥0.00

¥1,978.45
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
571000100-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

あなたのNaze32 / F3のフライトコントローラの場合、この多機能FPVドローンPDBはレースのパフォーマンスと信頼性を提供するように設計されています。 ESCののあなたの選択にさわやかな、固体の電源を有効にし、また、カメラの内外に電力を供給し、送信機のLEDなど

以下からの電力が6S LiPolyバッテリに2Sから供給され、ボルト、アンペア、タイマー&RSSIを表示するためにスクリーンディスプレイ(OSD)に対応していすることができます。
OSDはCleanflight、Betaflight&BaseflightのようなMWODSファームウェアをサポートしています。

これはあなたのFPVレーシング無人偵察機用OSDと防弾PDBです。

特徴:
•配電盤+ 5V / 12V BEC + OSD
•サポート2-6S入力電圧
•2オンス銅箔は、4層基板は、大電流のベースを確保します
•デュアルBEC、5V / 12V
•OSD機能、サポートKVteamのMWOSDのファームウェアは、FTDI付属しています
•は、OSDは、このような基本的なボルト、アンペア、タイマー&RSSIを提供していますサポートしています。
•36のx 36ミリメートルサイズ、Naze32、CC3D、SP3と同じ取り付け穴

仕様:
入力電圧:5-24V DC(2-6S LiPoly)
BEC:5V / 2A&12V / 2Aの切り替え可能
最大分布現在:70A定数、100Aバースト
寸法:36のx 36 x 4mmの
取り付け穴:30.5 X 30.5ミリメートルM3(標準)
重量:7.3グラム

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Bumbak | 確認済みの購入者

  • Overall
  • Quality
  • Value

Very nice PDB

Feb 14, 2017

this is basically clone of MXK PDB with OSD from BG, its cheaper too, works nice, it indeed have OSD built in, but be carefull when mounting it, one tiny capacitor is way to close to the screw hole (at VID IN contact) and if u tear it off like I did you will lose VID IN signal from camera.. luckily I was able to find and solder new one :) and now its working again :) also both voltages for cam and VTX are set to 5V but you can change those to 12V if needed by soldering together different contacts together, look for MXK board for more detailed info

Colbolt16 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 22, 2016

I recently purchased this board and the I must say the wire layout is nuts!!! Should have been 6 pads or 12 pads labeled /- beside each other , not 1pad for 3wire all( ) VCC and another pad for (-)GND then switch them on the other side of the board to GND and VCC. Next no easy way to access OSD menu or even away to tell you how to connect with FC. Next a manual would be nice as to tell you not to hook up wires to the VCC/GND on the Vout ports if your using a vtx that has it's own power cable and feeds the camera power also.
I got the set to work without plugging in the power lead for the vtx I let the V/out port power the vtx. Strange thing when I plug battery pack in to PDB board Vtx power all the way on. If anyone is using a V2 cricket from Rmrc don't plug the vtx in to the PDB board while using all the V/out ports as both V/in and V/out provide power. I think I need to plug the power lead wires into the V/out port so It can power the vtx and I get to turn it on and off when I choose. As of now when I power the board the v2 cricket turn all the way on (green light) and that's not suppose to happen. I will attempt this soon and hopefully figure out how to get the both boards talking to each other as far as battV / timer / and flight mode. I will post again soon once I work the kinks out!!

顧客ファイル
Watch out when screwing this board Download [56]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!