新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • Global

フルメタル機械が後退2セット(6PC)

フルメタル機械が後退2セット(6PC)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
169 g
SKU:
OR011-01805
商品概要

フルメタル機械が後退2セット(6PC)

設定重量:55グラム

ノーズギア:
長さ:13ミリメートル
シャフト:3ミリメートル
取り付け穴:22ミリメートルX 23ミリメートル
操縦可能:はい

メインギア:
長さ:18ミリメートル
シャフト:3ミリメートル
取り付け穴:23ミリメートルX 23ミリメートル

注:2フルセットを受け取ることになります(合計6PC)

Product
Specifications

追加情報

  • 単位:
    OR011-01805
  • Brand:
    N/A
  • 容量(mAh )
    いいえ
  • 重量(g )
    169.00
  • 長さ:
    0.00
  • Width:
    0.00
  • 高さ
    0.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
My 6 retracts have the shafts glued in and no grub screws so that you cannot remove them and put in the correct size leg for your application.
To get the shafts out you need to heat them with a heat gun and then wind them out.
You then need to drill and tap the appropriate size hole for grub screws which you will have to purchase yourself in order to use the retracts.
Despite many emails and photos customer service doesn't see to care or understand the problem hence the reason for 3 crowns.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
After my initial review, I'm downgrading these as there are several issues.

The nose set isn't flush mounted, all screws need loctite/tightening, the nose gear transit shaft requires the total dissassembly of the gear to remove and there is NO provision of a collar for when YOU the end user, fits a landing gear leg. (the mount is hollowed out for one though none supplied) Some work involved to bring these up to a useable standard and would suit parkfliers/foamies better than heavier models.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice construction some play but no more than othe types. Recommend pulling apart and loctiting the screws. The plastic clevis connections are a bit iffy and a couple aren't straight. Good for smaller models but time will tell in a Seagull Pc9 .46 size E-conversion.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought these to replace the plastic retracts on my heli artist agusta a109 fuselage for my trex 500 helicopter. I had to slightly grind away some wood on the body work and they now fit perfectly.They are fantastic quality and lock up and down rock solid. I used the original strut and wheels.Using hs65mg servos to drive them. A great improvement at a bargain price even though they are heavier - good job hobbyking.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I've received two packs. It's really good stuff for this price. Two packs are very useful like replacement in case hard landing. However, I still use one pack installed at my plane, and it works fine.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Lose 1 crown beacuse the nose gear retracts that I recieved have the mounting flange on the opposite side of the retract. It is not a flush mount as the picture shows. It cannot be reversed. The main gear are flush mount. This may be no big deal for most applications, but can cause a headache for others!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
WOW am I impressed with the quality of these retracts! I got all six pieces ans immediately disassembled one of the steering type to see what makes it tick. All very good quality aluminum and the machining was top notch. If required the steering can be locked in place by moving two set (grub) screws and removing the steering arm. I am ordering another set for future builds.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It's verry good and strong, but a little bit loose in lock position up and/or down. The wheel, 100mm further, moves 2 mm.

And other thing, i receive only 1 set (3pc). I don't post to support because i pass the 48hours delay...
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。