サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Furious FPV PIKO BLX Micro Flight Controller

Generating Links

Furious FPV PIKO BLX Micro Flight Controller

価格:

Now save 節約 ¥5,206.67 ¥5,206.67

Special Price ¥1,597.50 ¥1,597.50

You save 節約 ¥5,206.67 ¥5,206.67

Was  ¥6,804.17

購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
245000016-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

Ultra-light, ultra-small and ultra-capable; Don't let the diminutive dimensions of the PIKO BLX micro flight controller lead you to think that there's anything small about its revolutionary performance.

Created specifically for micro and nano FPV racing, the 27 x 27mm PIKO BLX is loaded with features to make it a zero compromise choice for your next racer: STM32F3 micro-controller, built-in PDB, heavy duty 5V 2A BEC, LC RF filter, buzzer, gold solder pads, Sbus inverter, Frsky telemetry...the list goes on! For a really busy FPV racer, you can have everything running at once when you include, OSD, SmartPort, SBus, GPS, LED strip, battery monitoring, sonar AND 6 motors - all at the same time!

The latest STM32F3 microprocessor (ARM-Cortex M4 core) with built in CleanFlight and BetaFlight firmware, industry leading components, LC filter for ultimate interference rejection ensure blistering performance at all times. Add the 2A 5V BEC with built in Sbus inverter and you've got a combination that leaves the rest standing.

Installing the PIKO BLX couldn't be easier either, with gold plated solder points for direct soldering of motors, VTx, receiver and FPV camera making this super-simple.

Industry leading technology, simple installation and incredible performance have been brought together in the perfect fusion that is the PIKO BLX to bring you an all in one solution to wipe the floor with the opposition.

Hobbyking is an authorised distributor for Furious FPV products, so you can be sure that this is the real deal and not a clone.


Features:
• CleanFlight & BetaFlight firmware
• Smallest STM32F3 chip flight controller
• Built-in PDB
• Built-in BEC
• Dedicated PPM receiver input
• Buzzer
• LC Filter
• Gold plated solder pads
• Sbus Ready w/built in inverter
• Telemetry ready (Frsky)
• Battery voltage monitor
• USB support
• Reverse polarity protection
• LED interface
• Low-noise MPU-6000 SPI-bus gyro chip

Specs:
Type: Micro/Nano flight controller
Processor: STM32F3 w/ARM-Cortex M4 core
Serial ports: UART1/2/3
Voltage: 21V (5s LiPo)
BEC: 2A @ 5V
Max current: 50A
Receiver input: PPM 5V
Dimensions: 27 x 27 x 7.5mm
Mounting holes: 20 x 20mm
Weight: 2.6g 

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

C | 確認済みの購入者

  • Overall
  • Quality
  • Value

Furious FPV PIKO BLX Micro Flight Controller

Jun 15, 2019

Works great!

Lee | 確認済みの購入者

  • Overall
  • Quality
  • Value

Furious FPV PIKO BLX Micro Flight Controller

Jun 13, 2019

It's a good small board! use it for tri copter's to! I do recommend!

Chris | 確認済みの購入者

  • Overall
  • Quality
  • Value

Hmmm?

Jun 07, 2019

I could not get this gut to connect to BF or CF? HK promptly refunded my cost though so all is good, that's the only reason i'm giving it *****

yannick | 確認済みの購入者

  • Overall
  • Quality
  • Value

super

May 10, 2019

mini carte de vol pas chere et tout en un !!! pour le moment fait le job

Richard | 確認済みの購入者

  • Overall
  • Quality
  • Value

Great little board with big board performance

Apr 01, 2019

Had a little trouble figuring out the correct firmware (FF_Piko ver 3.15.19 right on the Betaflight dropdown.) Bought 3 of these so far to upgrade some older controllers in some of my approx. 30 current quads. Have had limited flight time so far on a Dalrc 215 size quad, but I was impressed enough to buy more. Pay attention to the flashing instructions- must jump the boot pads on boot-up to get into flash mode, won't go into boot mode via software. No compass or baro- so if you want those features you must add module via I2C port.

Chris | 確認済みの購入者

  • Overall
  • Quality
  • Value

DOA!

Mar 31, 2019

This board is DOA!!!! 4 hrs or more of my life wasted Trying to research how to solve!? after doing much reading online it sounds like junk and it's like REALLY OLD!? Can't even find firmware/hex files for this thing to even try and flash it? looked on GitHub and nothing for FF_PIKOBLX? I surely hope HK will Make it up to me!? give me a refund or a different f/c that actually works!!! Would give 0 stars but can't rate that low!

顧客ファイル
Schematic 1 Download [103]
Schematic 2 Download [363]
Schematic 3 Download [123]
Manual Download [2]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!