30ミリメートル（EDF30）システムのGWS EDFケース

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 20, 2011

going to see if this or the clear blue edf30 case is a better fit for the tiny 1220/1230 inrunners.

• Overall
• Quality
• Value

Certified Buyer Rated

Jul 22, 2011

Genuine GWS 30mm EDF housing. Fits a 10mm inrunner motor.

Can be modified to accept 12mm though this involves removing the housing and either making a new 12mm housing (pen-knife blade replacement tubes are perfect size) or gluing the stators directly to the motor.

Can also be made lighter be removing the intake lip (for models with embedded EDF units) and/or shortening the exhaust and making your own lighter thrust tube.

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 08, 2011

Top Preis und Originalware von GWS. Danke HK

• Overall
• Quality
• Value

Customer Rated

Jul 18, 2010

The finish is good and it fits the turnigy 1015 perfectly. Only when I mounted my impeller I noticed that it was not very even. The impeller started grazing one side. I had to sand that area and remove some plastic with a blade. The setup worked after that but the finishing and gloss is all gone

• Overall
• Quality
• Value

Customer Rated

Apr 28, 2010

Usable motor is...

"Turnigy 1015 Brushless Inrunner Motor 11500kv"

• Overall
• Quality
• Value

Customer Rated

Mar 01, 2010

Goes great with a Turnigy 1015 motor fitted running on two cells. about 55 -60g thrust. motor gets hot but survives (so far).

ignore the last review about using CA to glue the motor in.. The mounting holes line up perfectly so you can just use two M1.6 x 1.8mm long screws to mount it.



Steve

• Overall
• Quality
• Value

Customer Rated

Feb 19, 2010

I used this with the GWS EDF30 Impeller and the Turnigy 1015 11000kv inrunner. The impeller connects to the shaft of the motor by friction. On 1s it is able to retain however on 2s it flies off and hence you may need CA to secure it. Furthermore on 2s with the motor aforementioned you can cut half the blades off to reduce the load and heating. Cheers.

• Overall
• Quality
• Value

Customer Rated

Jan 31, 2010

This is a good quality fan housing....I will buy again.

G.H.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 07, 2010

nice clean edf caseing ++++

• Overall
• Quality
• Value

Customer Rated

Nov 17, 2009

Use the Turnigy 1015 Brushless Inrunner Motor 11500kv for this.