新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • USA

GWS VテールミキサーII(200ステップ)

GWS VテールミキサーII(200ステップ)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
40 g
SKU:
GW-V-TAIL-J
商品概要

このデバイスは、他のチャネルへのチャネルを混合し、飛行する航空機が容易になりことができます。
送信機は何のミキシング制御機能を持っていない場合は、デルタ翼またはV-テール飛行機を飛行することが必要です。

動作電圧:4.8V〜6V(標準4.8V)
解像度:200ステップ
働く温度:-5°C〜50°C
重量:5グラム
外形寸法:22x13ミリメートル(0.866x0.512中)
ミキシングレート:1:1

行き方;
受信機のエルロンにAILEとELEVコネクタを差し込み、配線図が示すように、それぞれのチャンネルエレベータ。
配線図に従ってSERVO 1&VテールミキサーのSERVO 2にAILEとELEVコントロールサーボを接続します。
Vテールミキサーにぬれないようにしてください。
任意の変更は、所有者の責任で保証が無効になります。

Product
Specifications

追加情報

  • 単位:
    GW-V-TAIL-J
  • Brand:
    N/A
  • 重量(g )
    40.00
  • 長さ
    0.00
  • Width:
    0.00
  • 高さ:
    0.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Use for differential throttle with only one additional tx mix. With flip of designated tx switch I have dif. throttle for water taxi...turn off mix and have conventional rudder for flying. Ordering more for future multi-motor flying boats.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
One of the best v tail mixers
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this V-tail mixer as a replacement for the Turnigy V-tail mixers I bought earlier, but which gave a lot of jitter on my TowerPro miniservos. This one does not give jitter at all, instead nice and smooth movements and a neat position hold.



The leads to the receiver on this mixer are very short, only 5-8cm long. This in contrast to the 20cm or so leads of the turnigy. See for yourself if that's a con or a pro, for my application it was a definite pro as space is pretty limited in a 22cm boat.

A little pricey, but the superior performance justifies the extra cost just fine IMHO.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I got this to try out in one of the kids toys, a foam model the Hyper Flyer
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
doesn't work as a V-tail mixer. Strangely, it will mix any two channels together, except for elevator and rudder. I can mix Elevator, Flaperon, "Throttlevator" etc. etc. but when I mix the two channels that you would normally expect from a "V-tail Mixer" (as the package describes it) it barely moves the servos at all. I've tried it with two transmitters and 3 receivers, plus the APM, always with the same result!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
only for v- tail not for delta
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hmm. Eip nit moittia voi. 3kpl kytss ja moitteetta toimii
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Voici une utilisation particulire de ce produit, jutilise celui-ci sur un bimoteur afin de rgler la vitesse des moteurs avec la direction.



Here is a particular use of this product, I use it on a twin-engine to adjust the motor speed with rudder.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
What for is this, if you have a mixer in your radio?

Now, I will tell you, why I use it istead of the radio mixer. This cheap thing makes it possible to use a gyro on both servos lets say on the ailerons. If you put the giro in front of that mixer on the aileron channel, both servos will act onthe giro as the input channels allway work on both servos. Same is possible but not common on elevator. If you have your mixer in the transmitter used, you could put a giro only on one servo, acting only on one of the two ailerons wich makes not really good work. With this very light weight part, there is a great solution to do that. Thats why I use his instead of my transmitter mixer on a small Elevon jet.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great unit, I use it on a funjet ultra with a hobbyking T6A radio. Very small, light and tidy unit. Aileron and Elevator sockets are mislabelled, but once you get past that it works beautifully. Super smooth response, i believe it really is a 200 step mixer.
Highly recommend!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

顧客ファイル
Connection diagram download now [6kb]
MAnual download now [112kb]

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。