サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

PETG Premium Transparent Green 500g 1.75mm HobbyKing

Generating Links

PETG Premium Transparent Green 500g 1.75mm HobbyKing

価格:

Now save 節約 ¥0.00 ¥0.00

¥2,343.15
現在の状況:
在庫切れ!
SKU:
9913000018-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

Print with strong, flexible filament to create spare parts, artworks and 3D models. PET-G premium filament has high clarity and minimal shrinkage making it easy to use at a work bench or in the office.

PET-G @df can be used on all common desktop FDM or FFF technology 3D printers. The recommended temperature for heated bed is ± 35-60˚C and adhesion is possible on different surfaces.

Combining the advantages of PLA and ABS, this quality filament is odor neutral and hydrophobic, meaning that it won't absorb water. Trust our premium PET-G filament to create the best results every time. An excellent material choice for your next 3D printing project.

Features:
• High clarity
• Strong and flexible
• Almost no “warping”
• Hydrophobic (does not absorb water)
• Food contact acceptable
• Odor neutral printing

Specs:
Width: 1.75mm
Weight: 500g
Colour: Transparent Green
Specific Gravity: 1,27 g/cc
MFR 190°C/2,16 kg: 6,4 gr/10 min
Tensile Strength at Yield: 50,4 Mpa
Strain at Yield: 5,9%
Strain at Break: 22.7%
Tensile Modulus: 2020 MPa
Flexural Modulus: 2050Mpa
Flexural Strength: 69 MPa
Impact Strength - Charpymethod 23˚C: 8,1 kJ/m2
Rockwell Hardness: 105
Moisture Absorption: 1104ppm
Printing Temperature: 240°C +/-10%
Bed Temperature: 60-80°C
Heat Deflection Temperature: 70°C
Transparency: 90%

Storage: Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.

 

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Tibor | 確認済みの購入者

  • Overall
  • Quality
  • Value

Nice prints after tweaking

Jul 18, 2018

I had to do a lot of parameter tweaking (using Anet A8 and Cura 3.4) , but finally I managed to achieve decent results with this filament.
Most important is that in case of printing fine details, the print speed has to be very low (12.5 mm/s in my case), and even in case of rough prints, the print speed should be kept quite low (below 25mm/s in my case). Otherwise I experience strong underextrusion. Optimal hotend temperature range for me is 210-220 Celsius (and 60-70 Celsius bed temperature). Below that range the layer adhesion gets lower, and above that range the filament melts too much, resulting in less detailed and a bit distorted prints, and stronger stringing. Another key factor is the fan speed set to a low value (20%), because in case of stronger cooling the layer adhesion will suffer. On the other hand, setting the fan speed to 0% is not appropriate as well, as it results in warping (albeit moderate) of overhang sections of the prints. To some extent that warping may be reduced if using a higher bed temperature (80-90 Celsius).
Minimizing oozing and stringing requires a lot of experimenting with this filament. For me the key parameters were maximal travel speed, moderate retraction settings (25mm/s retraction speed, 1.7mm distance), coasting and wiping enabled and set to moderate values.

Gunsmith Fiamma | 確認済みの購入者

  • Overall
  • Quality
  • Value

Unbelievably Good!!!

May 26, 2018

What they advertise is true: this is a premium filament.
It print almost like PLA (just set your retraction) but a little bit slower, the layer adhesion is really good.
I got this quality, only on brands that are more, than double the price.
Just a little hint: If you, like me, are using Ultrabase as a build plate, set the initial temp. at 80° and the rest at 70°. At 60° Ultrabase might not work properly.

ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!