サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

ホーカーハンター70ミリメートルEDFジェット6Sワット/引っ込む&フラップWSR(PNF)

Generating Links

ホーカーハンター70ミリメートルEDFジェット6Sワット/引っ込む&フラップWSR(PNF)

価格:

Now save 節約 ¥0.00 ¥0.00

¥16,361.20
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
HAWK-H-PNP-W
送料無料したい? クリックする こちらへ 詳細情報を参照する

ホーカーハンターはUKSは、第1翼戦闘機を席巻し、世界accross多くairforcesによって運営されている大成功でした。華麗卿シドニー・カムによって設計され、ハンターは確かにその時代の最高の探してジェットの一つであったと1953年に世界速度記録を含むいくつかのレコードを破るようになった22ハンターが形成においてループしたときに、別の素晴らしいレコードが設定されました!ハンターはまだ右、1990年代にトレーナーとして使用されていた、最も成功した、最高の探して冷戦時代の戦闘機の一つとして歴史にダウンしました。

これは非常に規模と見事に完成したモデルは、プラグNフライで、事前に嵌後退全てのサーボ事前に取り付けられ、全金属/バネ上が含まれています。プレフィット合金ファンユニットは、このユニットは、推力の1700グラムの周りに生成reccomended Lipolyに、超滑らかな信頼性の高い効率的な、非常に強力な超高品質です。 OPTO ESCはまた、RX電力を供給するために図5A UBECで予め取り付けられています。構築することは困難ではないが、ハンターは、いくつかのPNFのモデルよりも少し複雑です。デザインは、各セクションが「モジュール」として完成されていると、賢いです。

6Sにプリインストールファンユニットの絹のような滑らかな音が信じられるために聞いたことがあります。それはレールの上にあり、また、プリインストールスプリットフラップのおかげで着陸するために簡単です、安定性と優雅さとスピードを兼ね備えたようなこのモデルは飛びます。このハンターは頭が良いルックスを回すと品質&性能を兼ね備え、あなたが飛んフィールドで目立つようにしてくださいです。

仕様
翼幅:866ミリメートル
長さ:1157ミリメートル
フライング重量:1500グラム
EDF:70ミリメートル合金6S用2399kvブラシレスInrunnerモーター付き
ESC:60A OPTO完全プログラマブルESC
サーボ:9×高トルクサブマイクロサーボ
RXパワー:HV UBEC調整可能な5V / 6V出力

含まれています:
すべてのハードウェア&デカール
フォト命令ブック
パイロットフィギュア
サーボ延長&Y-リード

必要なもの:
あなた自身のTX / RX 6チャンネル
2200mAhの6秒〜2650mAh 6S Lipolyバッテリー

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Natali | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 01, 2014

Pros: This is a typical Rc Lander plane. Lots of pieces and lots of steps with epoxy. Quality is excellent and all the parts fit together well. The paint is done well and and look really good. The cheater hole is covered with a solid piece of plastic and there is plenty of power.
Cons:I really wish this was a 4s system. The battery bay is really small and I'm having a hard time imagining a 6s pack in there, So plan on 2 3s packs. Lander, obviously thinks this is the way to go too as there is a series plug included (BTW everything is Deans T connectors, which is what I use). So, don't expect long flight times. THE BIGGEST disappointment is the manual retracts. They work fine (and are pre-setup) but I have to think Rc Lander has a ton of left over manual retracts to off load instead of including their nice electronic retracts. Fortunately, they seem tough and I had a set on my Lander F-16 and Panther and they held up fine.

If you've ever owned a Lander plane, no surprises here. If not, this is a lot more work than other EDFs on the market but in the end you get a very high quality plane.

Mick | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 06, 2011

Plane looks great! I am very pleased to see that hobbyking are beginning to get in some jets that are your average run of the mill!! good to see some other jets coming through!! maybe one day hobbyking might be selling the Saab Viggen....one can dream!

顧客 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 05, 2011

Fantastic jet, brought direct from a UK model shop. Flying weight stated as 1500g but mine came at 2300g with all the hardware included with the kit. Running mine on a 3200mah 35c 6s lipo and getting 850w. Good fast flight but not much vertical performance. Tends to tip stall and due to the high wing loading it comes in like a brick. Flys like it is on rails. I took all the undercarriage out and flaps and rudder to reduce weight and measured at 105 mph level flight. Fantastic jet well worth the money, but the elevator linkage needs sorting as the metal rod bends and deforms under pressure. Great aircraft and at a fantastic price, mine cosst 400 to get up so a real steal at this price!! :)

ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

アクセサリー