新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録

HD1610-3400KV屋内/プロフィール/ F3Pアウトランナーモーター

HD1610-3400KV屋内/プロフィール/ F3Pアウトランナーモーター

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
38 g
SKU:
HD-1610-3400

Combine

essential items and
esc
acc
商品概要

これらの素晴らしい小さなshockieモータは、素晴らしいパフォーマンスとお金のために大きな価値を提供しています。手の傷やバランスのとれたこれらの超軽量モーターは、光屋内3DプロファイルとF3Pモデルの最軽量のための素晴らしいです。

特徴
軽量設計。
強力なモーターマウント。
プロペラセーバーを内蔵しています。

仕様。
RPM / KV:3400
アイドル電流:0.6A
Lipoly:2〜3
最大の電流:3.6A
ESC:6A
推奨小道具: は5x3
スラスト:114グラム
シャフトサイズ:1.5ミリメートル
重量:6.4グラム(ワイヤを含む真の重量)
マウント寸法:20ミリメートルX 20ミリメートル

含まれています。
2×プロップセーバーバンド

Product
Specifications

追加情報

  • 単位:
    HD-1610-3400
  • Brand:
    いいえ
  • 重量(g )
    38.00
  • 長さ
    120.00
  • Width:
    28.00
  • 高さ:
    45.00
  • KV ( RPM / V )
    3400.00
  • 最大電流( A )
    7.00
  • 電力( W ):
    25.00
  • 長さB ( mm)の:
    9.00
  • ことができます長さD (ミリメートル)
    5.00
  • 最大電圧( V )
    11.00
  • シャフトA (ミリメートル):
    1.50
  • Unit Weight (g):
    6.4
  • 直径C (ミリメートル)
    16.00
  • 総丈E (ミリメートル)
    16.00
  • 抵抗( MH ):
    0.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Not happy with this motor. I purchased 2 of these in tandem with the plush 6A ESC. They often fail to run, oscillating for several seconds before finally spinning. I tried changing ESC's without success. I ran other motors with the same ESC with success. So it is evidently the motors.

Not going to use these again.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
??????? ?? ??? ?? ? ??????. ?? ??? ?? ??? ?? ??? ??? ?? ???? ????.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I purchased 5 of these motors, The bearings failed after only 5 flights, This would be a good motor if they only used high quality bearings. I replaced the first failed motor with another and the bearings failed after 6 flights. In both failures I was using a properly balanced prop with a 2s lipo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I run 2s 5030 w/ 6a plush on 100g airplane. I would recommend a AUW if 80g or less. 3s was too much for this motor! Quality built, but needs to come w/ screws as mounting it was a pain... tiny motor!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ein richtiger Winzling, Achtung Schraublcher sind sehr klein < 1mm, und im Lieferumfang sind auch keine dabei.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Awesome little motor, packs a very good punch on 2s batts and a 5x3 it will surprise you how much grunt it has. Well made and shows quality but a bit expensive. I bought two and looking to buy another two when back in stock.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very happy with this motor, for such a light (6.5 gr) motor it produces lots of power with 2s batts and gws 5030 props. Truly a joy to fly my 70 gram AUW Underball 14" with this motor, good magnets and decent quality.
Responds very well to throttle, revs up quickly.

You'll need 1x4mm self taping screws as the mounting holes are very, very small. I wouldn't make them bigger and weaken the arms. 1x4 screws are fine.

Not cheap but worth the money, would def recommend this motor for up to 80 gram AUW models for lively performance. Maybe heavier ones too but would loose the punch these DO deliver.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Motor Gesamtlaenge 17mm, Befestigungsloecherradius 10mm, Bohrung 1mm,

Aufnahme fuer LS 4mm Durchmesser,

Gewicht 6,27g mit 5,5cm Kabel

O-Ring Gewicht 0,11g Innendurchmesser 8,5mm
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good motor, strong magnets, build in a small 3d indoor flyer.

Much power with 5x3 slowfly prop. Motor becomes just slightly warm after 5 minute 3d flying with a 2S 270 nano tec lipo.

Delivered rubber rings are too small.

I will buy more of this motors.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
good things : Nice motor.
i get a litlle more than 100gr of trust with 5x4.3 GWS and 4.3A 2S
(this getting the motor hot and smelly I didn't recomanded more than few second)

bad things : I don't get any prop saver band in my package :-/
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video