新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録

HD2613-1900KV屋内/プロフィール/ F3Pアウトランナーモーター

HD2613-1900KV屋内/プロフィール/ F3Pアウトランナーモーター

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
59 g
SKU:
HD2613-1900

Combine

essential items and
esc
acc
商品概要

これらの素晴らしい小さなshockieモータは、素晴らしいパフォーマンスとお金のために大きな価値を提供しています。手の傷やバランスのとれたこれらの超軽量モーターは、光屋内3DプロファイルとF3Pモデルの最軽量のための素晴らしいです。 2ミリメートル金を装備弾丸プラグをメッキし、超軽量カーボンファイバーモーターは、これらのモータは、中ボルト、離陸する準備が整いましたマウント!

特徴
軽量設計。
強い光のCFモーターマウント。
2ミリメートル金色のコネクタをプリインストール。
プロペラセーバーを内蔵しています。

仕様。
RPM / KV:1900
アイドル電流:1.0A
Lipoly:2〜3秒
最大の電流:7.3A
ESC:10A
推奨小道具:8×4
スラスト:310グラム
シャフトサイズ:3ミリメートル
重量:25.4グラム(ワイヤおよびコネクタを含む真の重量)
マウント寸法:35ミリメートル×35ミリメートル

含まれています。
3 x 2mmのメスコネクタ
2×プロップセーバーバンド
1×CFモーターマウント
3×プレカット収縮チューブ

Product
Specifications

追加情報

  • 単位:
    HD2613-1900
  • Brand:
    いいえ
  • 重量(g )
    59.00
  • 長さ
    122.00
  • Width:
    45.00
  • 高さ:
    55.00
  • KV ( RPM / V )
    1900.00
  • Unit Weight (g)
    25.4
  • 最大電流( A ):
    7.30
  • 抵抗( MH ):
    0.00
  • 最大電圧( V )
    11.00
  • 電力( W )
    49.00
  • シャフトA (ミリメートル):
    3.00
  • 長さB ( mm)の:
    11.00
  • 直径C (ミリメートル)
    26.00
  • ことができます長さD (ミリメートル)
    7.00
  • 総丈E (ミリメートル):
    25.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
great motor for the money, the carbon mount looks great and the power is perfect with a 8x4 gws prop on a 2 cell lipo
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Used this motor on my overweight Matrix after using to much glue in my build. Stock motor would not hold a hover. Couldn't be happier with the performance of this new little motor.Now my Matrix can hover all battery long.
Thanks HobbyKing.
Now just for some windless days.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very impressed. I bought this about a year ago and installed it in a competitors 48" Super Cub and even though I was not sure if it would have the guts to get in the air, it sure did! I know this is not what this motor is for, but figured if it could hover a 32 profile it should putt putt a Cub around while being very lightweight and cheap. With an 8x4 prop on only 2s also! I have not yet tried 3s (because I don't have one small enough to fit). Motor stayed cool and even pulling around that big(for the motor) Super Cub for 7 minutes on almost full throttle in gusty wind before my 2s 950mah was down to 3.6v per cell. Motor came packaged adequately. Cub has heavy oversize rubber tires, cheap gyro from a competitor, spektrum 4ch rx, 10 amp plush esc, 4 5g servos, steerable tailwheel and this motor to fly... Which is smaller than the tires!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent motor, i'm using it on my Topmodel Kosmos with a weight of 190gr and it runs perfectly, i'm using it with an 8x4.5 with a 2s lipo, it use about 100mah x minute.
It is very well made as i can run it up to 9,8 Amps without getting it warmer then a normal fly and without damaging it :) ( i have limited the throttle to 50pcnt, as at 100pcnt it reach 12 A with the 8x4.5 )
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
works great. motor itself is balanced well. However, mine makes a strange kind of flapping noise at low throttle, like the sound youd expect from a leaf or twig caught on something. but it runs fine. ill clean it soon. it only made the noise after i took it apart for cleaning, maybe i got something in it. but otherwise, great little motor, runs cool on 3s with 8x4. Im thinking of balancing my prop much more precisely and then running it on 4s. If it doesnt over-heat, ill use it that way. but so far it is very hearty and strong. reccommend. i use it on an HK Reactor. well done HK
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have bought two of these so far, and am very satisfied. I installed one on a 32 inch Extra Slick and it has plenty of power using a 2S battery, but with a 3S it is a lot more fun. The only issue I had was that the supplied o-rings are not very strong. They are usable, but I had to use two to hold the prop on securely.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
acc

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。