New Items フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

hexTronik DT1000ブラシレスアウトランナー1000kv

hexTronik DT1000ブラシレスアウトランナー1000kv

Discontinued Product

Please continue searching for a similar product.
SKU:
413000003
WANT FREE SHIPPING? Click here to find out more!

ルックスは欺くことができます。このアウトランナーは towerproベルモータの周りに2倍の大きさ、およびはるかに大きなプロペラをスイングします。そのモータは、その耐久性にtestimentであるアート・最寄のいくつかの新しい面キット、使用および品質の容易に使用します。

スペック。
必要な電圧:11.1V
最大消費電流:35A
最大消費電力:500W
無負荷電流:1.2A
シャフト:M4(Towerpor / GWS SFスローフライ小道具に最適)
重さ:115グラム
直径:41ミリメートル
全長:66ミリメートル
KV:1000rpmで/ V
イメージに示すように、マウントが付属しています

プロップテスト
プロップサイズ電圧アンペアスラスト
11x9 3ブレード11.1V 20A 1200グラム

  • 単位 413000003
  • Brand hexTronik
  • 重量 140.0000
  • 長さ 80.00
  • Width 60.00
  • 高さ 65.00
  • KV ( RPM / V ) 1000.00
  • 最大電流( A ) 35.00
  • 抵抗( MH ) 0.00
  • 最大電圧( V ) 12.00
  • 電力( W ) 500.00
  • シャフトA (ミリメートル) 4.00
  • 長さB ( mm)の 33.00
  • 直径C (ミリメートル) 41.00
  • ことができます長さD (ミリメートル) 13.00
  • 総丈E (ミリメートル) 66.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

These are great motors - powerful and efficient - using these to increase the power on a number of models without breaking the bank or being power hungary

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These are great motors - powerful and efficient - using these to increase the power on a number of models without breaking the bank or being power hungary

I've had very good luck with these motors. I use them on my tricopter and they have lots of power. I have 10x4.5 props, pulling around 23 amps (per motor) at full throttle. I've had to replace the bearings in one after a crash, but that's to be expected. Make sure to secure the wires to prevent stressing the the connection to the stator, I used a little bit of 5 minute epoxy, worked great.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've had very good luck with these motors. I use them on my tricopter and they have lots of power. I have 10x4.5 props, pulling around 23 amps (per motor) at full throttle. I've had to replace the bearings in one after a crash, but that's to be expected. Make sure to secure the wires to prevent stressing the the connection to the stator, I used a little bit of 5 minute epoxy, worked great.

???? ??? ? ??? ??? ???

?? ?? ?????

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

???? ??? ? ??? ??? ???

?? ?? ?????

good engine
pulls 1375 grams with Turnigy 2200 3s nano and an old wood 11 * 7
I have two of these and will buy more

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good engine
pulls 1375 grams with Turnigy 2200 3s nano and an old wood 11 * 7
I have two of these and will buy more

I use this motor in a Hk Club Trainer, with 10X6 prop and 40 ESC. I'm very satisfied with its efficiency, the plane climbs like a rocket and can performance any aerobatics with more than enough power. And furthermore a good price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this motor in a Hk Club Trainer, with 10X6 prop and 40 ESC. I'm very satisfied with its efficiency, the plane climbs like a rocket and can performance any aerobatics with more than enough power. And furthermore a good price.

Mine doesn't work at all. Quality visibly worse than my original motor from Mustang P 51 Art-Tech (same as HK Mustang).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mine doesn't work at all. Quality visibly worse than my original motor from Mustang P 51 Art-Tech (same as HK Mustang).

Este motor podria sustituirlo por El D4023 con Una 12/6 1500gramos esc 60 bis prrafo es sin ENTRENADOR Parecido al cesna 1,4 cm de envergadura.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Este motor podria sustituirlo por El D4023 con Una 12/6 1500gramos esc 60 bis prrafo es sin ENTRENADOR Parecido al cesna 1,4 cm de envergadura.

this motor is just amazing I am using it with a 12x6 apc prop and a 50A ESC and a 3s 3500mwh tons of thrust and power . and just near worm after a 8 minute flight thanks hobbyking its cheap and good quality and its power .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this motor is just amazing I am using it with a 12x6 apc prop and a 50A ESC and a 3s 3500mwh tons of thrust and power . and just near worm after a 8 minute flight thanks hobbyking its cheap and good quality and its power .

my test results are
3s 12x6 57 amps i stopped a little over 1/2 throttle
where did you get 11x9 three blade 11.1V 20A from?
completely ripped off with this motor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

my test results are
3s 12x6 57 amps i stopped a little over 1/2 throttle
where did you get 11x9 three blade 11.1V 20A from?
completely ripped off with this motor

I only give 3 Crowns because.....I bought four and they came with NO information. V X A = W. your specs call for a 11.1V at 35A = 388 watts??? you say 500 watts??? at 14.8 V x 35 amps = 518 watts?? So.. what is it? I don't want to burn out my motors using 14.8V But I want the 500 watts!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I only give 3 Crowns because.....I bought four and they came with NO information. V X A = W. your specs call for a 11.1V at 35A = 388 watts??? you say 500 watts??? at 14.8 V x 35 amps = 518 watts?? So.. what is it? I don't want to burn out my motors using 14.8V But I want the 500 watts!!

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!