New Items フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

hexTronik DT750ブラシレスアウトランナー750kv

hexTronik DT750ブラシレスアウトランナー750kv

Shipped From:
  • USA
  • Global
QTY:

Now save save AU$0.00 AU$0.00

AU$20.15
ステータス:
在庫あり
SKU:
DT750
WANT FREE SHIPPING? Click here to find out more!

ルックスは欺くことができます。このアウトランナーはtowerproベルモータの周りに2倍の大きさ、およびはるかに大きなプロペラをスイングします。そのモータは、その耐久性にtestimentであるアート・最寄のいくつかの新しい面キット、使用および品質の容易に使用します。
DT700は、推力以上の900グラムを生成するために、うまく11x4.7 SFプロップをスイングします。
より大きなGWSのfoamiesまたはparkflyプレーンのためのその素晴らしいです。

スペック。
必要な電圧:11.1V
推奨バッテリー容量:1300mAh +
推奨プロップ:11x3.8または11x4.7
最大消費電流:18A(11x4.7プロペラ付き)
最大推力:千グラム+
無負荷電流:1.4A
シャフト:4M(Towerpor / GWS SFスローフライ小道具に最適)
重量:78グラム
直径:41ミリメートル
全長:77ミリメートル
KV:750rpm / V
イメージに示すように、マウントが付属しています

試験報告書。
私たちは、アートハイテクピッツに電力を供給するためにDAT700のアウトランナーを使用していました。 1300mAh 3S1P 20Cパック、18AのBESCおよび1147 GWS / Towerproの小道具で実行し、アートハイテクピッツはうまく走りました。優れた上昇率、hoverable、および13minute飛行時間以上とされていないが、我々は非常に感銘を受けました。
0.15サイズまでの遅い飛行モデルのための非常に効率的なアウトランナー。

  • 単位 DT750
  • Brand hexTronic
  • 重量 79.0000
  • 長さ 88.00
  • Width 45.00
  • 高さ 51.00
  • KV ( RPM / V ) 750.00
  • 最大電流( A ) 17.00
  • 抵抗( MH ) 0.07
  • 最大電圧( V ) 13.00
  • 電力( W ) 300.00
  • シャフトA (ミリメートル) 4.00
  • 長さB ( mm)の 38.00
  • 直径C (ミリメートル) 40.00
  • ことができます長さD (ミリメートル) 10.00
  • 総丈E (ミリメートル) 78.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Well, It spins, which is good.

The shaft is ridiculous but its easy to cut to length

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well, It spins, which is good.

The shaft is ridiculous but its easy to cut to length

A strong motor. Cut the shaft if you do not require the length. Make sure to wrap the motor in a plastic bag as small bits of metal will kill the motor if they get stuck to the magnets.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A strong motor. Cut the shaft if you do not require the length. Make sure to wrap the motor in a plastic bag as small bits of metal will kill the motor if they get stuck to the magnets.

Good motor if you invest some time & money.
- needs balancing (all 6 I have bought)
- secure the wire with epoxy
- cut the shaft to the right size (a too long shaft gets bend easily)
- replace bearings (very important)

Use with 10,11,12 inch props. 12 inch needs 25 amp ESC.

I'm using them on an RCExporer Tricopter: Hover time about 25 mins. Flight time about 10 to 17 min depending how much full throttle.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good motor if you invest some time & money.
- needs balancing (all 6 I have bought)
- secure the wire with epoxy
- cut the shaft to the right size (a too long shaft gets bend easily)
- replace bearings (very important)

Use with 10,11,12 inch props. 12 inch needs 25 amp ESC.

I'm using them on an RCExporer Tricopter: Hover time about 25 mins. Flight time about 10 to 17 min depending how much full throttle.

Unbelievably efficient motors. Only requires a 20A ESC but delivers the lift.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Unbelievably efficient motors. Only requires a 20A ESC but delivers the lift.

Extremely good motor, especially for the price.There is one thing I dont like, and its the long motor shaft. I've only had one problem with this motor and its the E Clip on the bottom falling off in a crash, so remember to check if its firmly in place before you mount your motor. I recommend it!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Extremely good motor, especially for the price.There is one thing I dont like, and its the long motor shaft. I've only had one problem with this motor and its the E Clip on the bottom falling off in a crash, so remember to check if its firmly in place before you mount your motor. I recommend it!

Good motor, especially for the price. I dont like the long motor shafts though. I've had one proble with this motor, and thats the E clip on the bottom falling off, so just make sure its firmly in place before you mount your motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good motor, especially for the price. I dont like the long motor shafts though. I've had one proble with this motor, and thats the E clip on the bottom falling off, so just make sure its firmly in place before you mount your motor.

propellor batterie, amps&thrust

9055 carbon 3S/7,2A/530g 4S/11A/890g
Gemfan 9"x4.7 3S/9,8A/730g 4S/14,3A/1150g
10"x4.5 wood 3S/15,5A/900g 4S/22A/1300g
9"x4.5 3 blade 3S/15,5A/920g 4S/22A/1350g
Gemfan 10"x4.5 3S/15A/1050g 4S/22A/1500g
Gemfan 11"x4.7 3S/15A/1150g 4S/21A/1550g

Replace the tiny allen grubscrews in the mount with proper M3 allenbolts, so you can properly tighten them (use loctite) and won't lose your motor in midair!
Also use loctite on the grubscrew securing the motor shaft, or you might bind the bearings when tightening your prop on the shaft.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

propellor batterie, amps&thrust

9055 carbon 3S/7,2A/530g 4S/11A/890g
Gemfan 9"x4.7 3S/9,8A/730g 4S/14,3A/1150g
10"x4.5 wood 3S/15,5A/900g 4S/22A/1300g
9"x4.5 3 blade 3S/15,5A/920g 4S/22A/1350g
Gemfan 10"x4.5 3S/15A/1050g 4S/22A/1500g
Gemfan 11"x4.7 3S/15A/1150g 4S/21A/1550g

Replace the tiny allen grubscrews in the mount with proper M3 allenbolts, so you can properly tighten them (use loctite) and won't lose your motor in midair!
Also use loctite on the grubscrew securing the motor shaft, or you might bind the bearings when tightening your prop on the shaft.

DT750 3S 4S

prop Amps thrust Amps thrust

9055 carbon 7,2 530 11 890

Gemfan 9"x4.7 9,8 730 14,3 1150

10"x4.5 wood 15,5 900 22 1300

9"x4.5 3 blade 15,5 920 22 1350

Gemfan 10"x4.5 15 1050 22 1500

Gemfan 11"x4.7 15 1150 21 1550

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

DT750 3S 4S

prop Amps thrust Amps thrust

9055 carbon 7,2 530 11 890

Gemfan 9"x4.7 9,8 730 14,3 1150

10"x4.5 wood 15,5 900 22 1300

9"x4.5 3 blade 15,5 920 22 1350

Gemfan 10"x4.5 15 1050 22 1500

Gemfan 11"x4.7 15 1150 21 1550

Great motor apart from the long shaft! But is very efficient in power and thrust. Great for large depron scratchbuilt slow flyers and works well on a RCExplorer tri!

Lacks punch but it is a low Kv motor after. However great thrust on 10 to 12inch props!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great motor apart from the long shaft! But is very efficient in power and thrust. Great for large depron scratchbuilt slow flyers and works well on a RCExplorer tri!

Lacks punch but it is a low Kv motor after. However great thrust on 10 to 12inch props!

Lots of power to pull my home made foam board projects.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Lots of power to pull my home made foam board projects.

Customer files
Drawing to print 1:1 letter format good Download [22]
I cant believe its not a .dwg! Download [29]
DAT750 Data Download [73]
foot drawing Download [19]
jpeg of a dwg. Read babysnakes' discussi Download [29]
jpeg of a dwg. Read babysnakes' discussi Download [29]
jpg of a dwg Download [29]
No File Name Download [48]
Rcexplorer type tri copter Download [1229]
Bearing/Base photo Download [2026]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!